Metra 99-8248B Bedienungsanleitung

Metra Kfz-Bausatz 99-8248B

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Metra 99-8248B (8 Seiten) in der Kategorie Kfz-Bausatz. Dieser Bedienungsanleitung war für 2 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/8
METRA. The World’s best kits.metraonline.com1-800-221-0932 © COPYRIGHT 2004-2014 METRA ELECTRONICS CORPORATION
REV. 12/9/2014 INST99-8248B
CAUTION: Metra recommends disconnecting the
negative battery terminal before beginning any
installation. All accessories, switches, and especially
air bag indicator lights must be plugged in before
reconnecting the battery or cycling the ignition.
NOTE: Refer to the instructions included with the
aftermarket radio.
Installation instructions for part 99-8248B
• ISO DIN radio provision with pocket
Painted black
A) Radio housing trim panel • B) Brackets • C) Pocket • D) (4) #8 x 3/8” screws E) (2) Panel clips
KIT FEATURES
KIT COMPONENTS
WIRING & ANTENNA CONNECTIONS (sold separately)
Wiring Harness: • 70-1761 or TYTO-02
Antenna Adapter: • Not required
• Panel removal tool • Phillips screwdriver
TOOLS REQUIRED
A B C D
E
Dash Disassembly
Toyota Highlander 2014-up .................................. 2
Kit Assembly
ISO DIN radio provision with pocket ...................... 3
Table of Contents
99-8248B
1. Unsnap and remove climate
control and the long trim panel
with it. (Figure A)
2. Unsnap the thin trim panel from
the top and right side of the radio.
(Figure B)
3. Unsnap and remove the climate
vents from either side of the radio.
(Figure C)
4. Remove four 10 mm bolts to
remove the factory radio.
(Figure D)
Continue to Kit Assembly
Dash Disassembly
(Figure C)(Figure A)
(Figure D)(Figure B)
99-8248B
Kit Assembly
(Figure B)(Figure A)
ISO DIN radio provision with pocket
1. Attach the (2) panel clips to the
radio housing.
Note: The factory panel clips
may be used if preferred.
2. Mount the pocket to the bracket/
panel assembly with the
(4) #8 x 3/8” Phillips screws
supplied. (Figure A)
3. Slide the radio into the assembly
and secure with screws supplied
with the radio. (Figure B)
4. Locate the factory wiring
harness in the dash. Metra
recommends using the proper
mating adapter from Metra or
AXXESS. All accessories, switches,
and especially air bag indicator
lights must be plugged in before
reconnecting the battery or cycling
the ignition. Test everything for
proper operation.
5. Mount the radio/bracket assembly
into the dash opening.
6. Snap the radio trim panel over the
new radio and reassemble dash in
reverse order of disassembly.


Produktspezifikationen

Marke: Metra
Kategorie: Kfz-Bausatz
Modell: 99-8248B

Brauchst du Hilfe?

Wenn Sie Hilfe mit Metra 99-8248B benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Kfz-Bausatz Metra

Bedienungsanleitung Kfz-Bausatz

Neueste Bedienungsanleitung für -Kategorien-