Metra 99-7882B Bedienungsanleitung

Metra Kfz-Bausatz 99-7882B

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Metra 99-7882B (8 Seiten) in der Kategorie Kfz-Bausatz. Dieser Bedienungsanleitung war für 4 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF
Seite 1/8
METRA. The World’s best kits.®metraonline.com © COPYRIGHT 2017 METRA ELECTRONICS CORPORATION
REV. 11/14/2017 INST99-7882B
CAUTION!
Metra recommends disconnecting the negative bat
-
tery terminal before beginning any installation, unless the vehicle
manufacturer recommends against so. Please check with your local
Dealership for more information. All accessories, switches, climate
controls panels, and especially air bag indicator lights must be con
-
nected before reconnecting the battery or cycling the ignition. Also,
do not remove the factory radio with the key in the on position, or the
vehicle running. It would be best to remove the key from the ignition
and then wait a few seconds before removing the factory radio.
Installation instructions for part 99-7882B U.S. PATENT # D728,554
• ISO DIN radio provision with pocket
Note: This kit will not retain the i-MID display
• A) Radio trim panel • B) Radio brackets • C) Pocket • D) (3) metal panel clips • E) (3) plastic panel clips
• F) (4) #8 x 3/8” Phillips truss-head screws • G) (13) #8 x 3/8” Phillips pan-head screws
• H) (3) #4 x 3/8” Phillips truss-head screws • I) (2) #8 x 1/2” Phillips pan-head screws
KIT FEATURES
KIT COMPONENTS
WIRING & ANTENNA CONNECTIONS (sold separately)
Wiring Harness: • Please visit metraonline.com for options
Antenna Adapter: • 40-HD11
• Panel removal tool • Phillips screwdriver • 8mm socket wrench
TOOLS REQUIRED
A B C D E
H
F
I
G
Dash Disassembly ..................................................2
Kit Preparation ........................................................3
Kit Assembly
– ISO DIN radio provision with pocket 3 ......................
Table of Contents
99-7882B
®
1.
Open the pocket door below the
radio, remove (2) Phillips screws
exposed, and then remove the
pocket. (Figure A)
2.
Remove (2) Phillips screws from the
bottom edge of the radio. (Figure B)
3. Remove (2) 8mm screws facing
up from inside the pocket cavity.
(Figure C)
4. Unsnap and remove the climate/
radio panel assembly. (Figure D)
5. Remove the components from the
climate/radio panel to be reused in
kit assembly. (Figure E)
a. Remove (4) screws from the
climate control panel.
b. Remove (2) screws from the
factory hazard button.
c. Remove (3) screws from the
factory vent.
d. Remove (3) screws from the
lower trim panel.
Continue to kit preparation
Dash Disassembly
(Figure E)
(Figure A)
(Figure B)
(Figure C)
(Figure D)
Step 5 a
Step 5 b
Step 5 c
Step 5 d
99-7882B
®
Kit Preparation Kit Assembly
(Figure A)
(Figure A)
(Figure B)
1.
Secure the factory components removed in dash disassembly to the . Except for the radio panel
(3) screws to secure the lower trim panel, either the factory screws or the (9) #8 x 3/8” Phillips
pan-head screws supplied with the kit may be used. For the lower trim panel use the (3)
#4 x 3/8” Phillips truss-head screws supplied with the kit to secure it to the panel. (Figure A)
2. Attach the (3) metal and (3) plastic panel clips to the . The factory metal radio panel
clips may be used in place of the metal clips, but not the plastic clips. (Figure A)
Continue to kit assembly
ISO DIN radio provision with pocket
1.
Secure the to the pocket radio brackets
with the (4) #8 x 3/8” Phillips pan-head
screws supplied with the kit. (Figure A)
2. Remove the metal DIN sleeve and
trim ring from the aftermarket radio.
3.
Slide the radio between the bracket/
pocket assembly
and secure it with the
screws supplied with the radio. (Figure B)
4. Secure the completed assembly to
the with the (4) #8 radio trim panel
X 3/8” Phillips truss-head screws
supplied with the kit. (Figure C)
5.
Locate the factory wiring harness and
antenna connector in the dash and
complete all necessary connections
to the radio. Metra recommends
using the proper mating adapter from
Metra and/or AXXESS. Re-connect the
negative battery terminal and test the
radio for proper operation.
6.
Reassemble the dash in reverse order
of disassembly using the (2) #8 x 1/2”
Phillips pan-head screws supplied
with the kit for the lower radio mounts.
Metal clip locations
Plastic clip
location
Plastic clip
locations

Produktspezifikationen

Marke: Metra
Kategorie: Kfz-Bausatz
Modell: 99-7882B

Brauchst du Hilfe?

Wenn Sie Hilfe mit Metra 99-7882B benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten


Bedienungsanleitung Kfz-Bausatz Metra

Metra

Metra 99-7367HG Bedienungsanleitung

6 September 2024
Metra

Metra 99-8223 Bedienungsanleitung

6 September 2024
Metra

Metra 99-7422 Bedienungsanleitung

6 September 2024
Metra

Metra 99-7875 Bedienungsanleitung

6 September 2024
Metra

Metra 99-3302 Bedienungsanleitung

6 September 2024
Metra

Metra 99-5802 Bedienungsanleitung

6 September 2024
Metra

Metra 99-7874 Bedienungsanleitung

6 September 2024
Metra

Metra 99-5832G Bedienungsanleitung

6 September 2024
Metra

Metra 99-9011 Bedienungsanleitung

6 September 2024
Metra

Metra 99-6000 Bedienungsanleitung

6 September 2024

Bedienungsanleitung Kfz-Bausatz

Neueste Bedienungsanleitung für -Kategorien-

Parrot

Parrot Minikit Chic Bedienungsanleitung

29 September 2024
Nedis

Nedis DTCTCO20WT Bedienungsanleitung

22 September 2024
BURY

BURY UNI Bedienungsanleitung

21 September 2024
Gembird

Gembird Bluetooth Car Kit BTCC-002 Bedienungsanleitung

19 September 2024
BURY

BURY Easytouch Pro Bedienungsanleitung

18 September 2024
Alpine

Alpine HCE-C157D Bedienungsanleitung

18 September 2024
Pyle

Pyle PL91HRTN Bedienungsanleitung

17 September 2024
BURY

BURY CV 9040 Bedienungsanleitung

14 September 2024
Alpine

Alpine KCE-425i Bedienungsanleitung

14 September 2024
Alpin

Alpin 61431 Bedienungsanleitung

9 September 2024