Metra 99-7622HG Bedienungsanleitung

Metra Kfz-Bausatz 99-7622HG

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Metra 99-7622HG (8 Seiten) in der Kategorie Kfz-Bausatz. Dieser Bedienungsanleitung war für 3 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/8
Metra. The World’s Best Kits.® MetraOnline.com © COPYRIGHT 2022 METRA ELECTRONICS CORPORATION REV. 8/18/22 INST99-7622HG
I N S TA L L AT I O N I N S T R U C T I O N S
99-7622HG
Attention! With the key out of the ignition,
disconnect the negative battery terminal
before installing this product. Ensure that all
installation connections are secure before
cycling the ignition to test this product.
KIT FEATURES
• ISO DIN radio provision with pocket
• Painted high-gloss black metallic
KIT COMPONENTS
• A) Radio housing • B) Brackets • C) Pocket • D) #8 x 3/8” Phillips screws (4)
TOOLS REQUIRED
• Panel removal tool • Phillips screwdriver
TABLE OF CONTENTS
Dash Disassembly ..................................................2
Kit Assembly ..........................................................3
WIRING & ANTENNA CONNECTIONS
(sold separately)
Wiring Harness:
70-7552
Antenna Adapter: 40-NI12
A B C D
Nissan Rogue 2014-2020,
Nissan Rogue Sport 2017-Up
Visit for more detailed information about the product and up-to-date vehicle MetraOnline.com
specific applications
386.257.1187
|
MetraOnline.com
2
DASH DISASSEMBLY
1. Unclip and remove the trim panel on the
end of the passenger side of the dash.
(Figure A)
2. Remove (1) Phillips screw securing the
A/C vent then unclip and remove the
vent. (Figure B)
3. Unclip and remove the trim panel above
the glove box starting at the vent and
working your way over to the radio.
Note: There is a hook on the radio side
of this panel so make sure you start
from the vent on the passenger side.
(Figure C)
4. Unclip and remove the A/C control.
(Figure D)
5. Unclip and remove the trim panel to the
left of the factory radio.
Note: On push to start models this
panel will have the start button on it.
(Figure E)
6. Remove (4) Phillips screws securing the
factory radio then unclip and remove
the radio. (Figure F)
Continue to Kit Assembly
(Figure A) (Figure D)
(Figure B) (Figure E)
(Figure C) (Figure F)
REV. 8/18/2022 INST99-7622HG 3
KIT ASSEMBLY
1. Attach the to the with pocket brackets
the provided (4) #8 x 3/8” Phillips
screws. (Figure A)
2. Attach the aftermarket radio to the
pocket/bracket assembly with the
screws supplied with the radio.
(Figure B)
3. Locate the factory wiring harness in
the dash. Metra recommends using the
proper mating adapter from Metra or
AXXESS. Re-connect the negative battery
terminal and test the unit for proper
operation.
4. Mount the new radio/pocket assembly
into the dash then snap the radio
housing over the radio assembly.
5. Reassemble dash in reverse order
of disassembly.
(Figure A) (Figure B)


Produktspezifikationen

Marke: Metra
Kategorie: Kfz-Bausatz
Modell: 99-7622HG

Brauchst du Hilfe?

Wenn Sie Hilfe mit Metra 99-7622HG benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Kfz-Bausatz Metra

Bedienungsanleitung Kfz-Bausatz

Neueste Bedienungsanleitung für -Kategorien-