Metra 99-7508 Bedienungsanleitung

Metra Kfz-Bausatz 99-7508

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Metra 99-7508 (12 Seiten) in der Kategorie Kfz-Bausatz. Dieser Bedienungsanleitung war für 2 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/12
INSTALLATION INSTRUCTIONS FOR PART 99-7508
99-7508
APPLICATIONS
Mazda CX7 2007-09
KIT FEATURES
• DIN Radio Provision with Pocket
• ISO Mount Radio Provision with Pocket
• Double DIN Mount Radio Provision
• Stacked ISO Mount Units Provision
• Painted Matte Black to Match Factory
• A) Radio Housing • B) ISO Brackets • C) ISO Trim Plate • D) Double DIN Brackets
• E) Double DIN Trim Plate • F) Pocket
Wiring & Antenna Connections (sold separately)
• 70-7903T - Mazda Service Harness 07-up
KIT COMPONENTS
A
TOOLS REQUIRED:
Small Flat Blade Screwdriver/ Panel Removal Tool
• Phillips Screwdriver
1-800-221-0932
© COPYRIGHT 2010 METRA ELECTRONICS CORPORATION
www.metraonline.com
B
D
E
C
F
Dash Disassembly
-
Mazda CX7 2007-2009.........................
. . . . . . 1
Kit Preparation............................................2
Kit Assembly
- DIN Radio Provision with Pocket . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
- ISO Mount Radio Provision with Pocket. . . . . . . . . . . . . . . . . . . . . . . . 4
- Double DIN Radio Provision . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
- Stacked ISO Mount Units Provision . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Final Assembly . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
TABLE OF CONTENTS
99-7508
*Note:
Refer also to the instructions included with the aftermarket radio.
99-7508 DASH DISASSEMBLY
MAZDA CX7 2007-2009
A
23
4
B
23
4
A/C
C
BACK OF FACTOR RADIOY
1
1
Remove (4) Phillips screws securing
the radio. Unplug and remove radio.
(
Figure B)
Disconnect the negative battery ter-
minal to prevent an accidental short
circuit.
3
Unclip and remove the trim panel sur-
rounding the radio and climate con-
trols. (
Figure A)
2
Remove (2) Phillips screws securing
the hazard switch to the factory radio
then separate the front half from the
rear half of the switch to remove.
(Retain the screws and hazard switch
for re-use during kit assembly.)
(
Figure C)
4
Continue to kit preparation


Produktspezifikationen

Marke: Metra
Kategorie: Kfz-Bausatz
Modell: 99-7508

Brauchst du Hilfe?

Wenn Sie Hilfe mit Metra 99-7508 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Kfz-Bausatz Metra

Bedienungsanleitung Kfz-Bausatz

Neueste Bedienungsanleitung für -Kategorien-