Metra 95-7810B Bedienungsanleitung

Metra Kfz-Bausatz 95-7810B

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Metra 95-7810B (4 Seiten) in der Kategorie Kfz-Bausatz. Dieser Bedienungsanleitung war für 2 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/4
METRA. The World’s best kits.metraonline.com © COPYRIGHT 2015 METRA ELECTRONICS CORPORATION
REV. 12/10/2015 INST95-7810B
CAUTION: Metra recommends disconnecting the negative battery
terminal before beginning any installation, unless the vehicle
manufacturer recommends against so. Please check with your
local Dealership for more information. All accessories, switches,
climate controls panels, and especially air bag indicator lights
must be connected before reconnecting the battery or cycling
the ignition. Also, do not remove the factory radio with the key
in the on position, or the vehicle running. It would be best to
remove the key from the ignition and then wait a few seconds
before removing the factory radio.
Installation instructions for part 95-7810B
ISO DDIN radio provision
Painted matte black
A) Radio trim panel • B) Radio trim panel brackets • C) Rear support bracket • D (8) #6 x 3/8” Phillips screws
20;-,(;<9,:
20;*64765,5;:
>0905.(5;,55(*655,*;065: (sold separately)
Wiring Harness: • 70-1729 Antenna Adapter:40-HD11
Panel removal tool • Phillips screwdriver
8 mm socket wrench
;663:9,8<09,+
Honda HR-V 2016-up
95-7810B
A C DB
Dash Disassembly ................................................. 2
Kit Assembly
ISO DDIN radio provision ...................................... 3
Table of Contents
95-7810B
2
Dash Disassembly
1. Open the glove box door.
2. Unclip and remove the trim panel
surrounding the radio and a/c vent
located to the left of the radio.
(Figure A)
3. Remove (2) Phillips screws and (1)
8mm screw securing the factory
radio, and then unplug and remove
the radio. (Figure B)
Continue to kit assembly
(Figure A) (Figure B)
95-7810B
1. Attach the radio trim panel brackets
to the using (4) radio trim panel
#6 x 3/8” Phillips screws supplied.
(Figure A)
2. Attach the rear support bracket
to the s radio trim panel bracket
using (4) #6 x 3/8” Phillips screws
supplied. (Figure B)
3. Slide the radio into the completed
assembly, and then secure it to the
assembly using the screws supplied
with the radio. (Figure C)
3
Kit Assembly
(Figure A)
(Figure B)
(Figure C)
4. Locate the factory wiring harness
and antenna connector in the
dash, and complete all necessary
connections to the radio. Metra
recommends using the proper
mating adapter from Metra and/or
AXXESS. Re-connect the negative
battery terminal and test the radio
for proper operation.
5. Reassemble the dash in reverse
order of disassembly.


Produktspezifikationen

Marke: Metra
Kategorie: Kfz-Bausatz
Modell: 95-7810B

Brauchst du Hilfe?

Wenn Sie Hilfe mit Metra 95-7810B benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Kfz-Bausatz Metra

Bedienungsanleitung Kfz-Bausatz

Neueste Bedienungsanleitung für -Kategorien-