Maxsa 43218 Bedienungsanleitung
Maxsa
Bewegungsmelder
43218
Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Maxsa 43218 (6 Seiten) in der Kategorie Bewegungsmelder. Dieser Bedienungsanleitung war für 13 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet
Seite 1/6
Model #: 43218
ASSEMBLY & OPERATING INSTRUCTIONS
ABOUT YOUR DUAL HEAD LED SECURITY SPOTLIGHT
The Dual Head LED Security Spotlight is perfect for porches, doorways, or around the exterior of your home
or business. The 8 super bright LEDs in the Dual Head LED Security Spotlight have an estimated life of
30,000 hours so they should never need changing.
This Dual Head LED Security Spotlight has an adjustable TIME dial that allows light duration of up to 30
seconds. New batteries should last roughly a year with normal usage.
The Dual Head LED Security Spotlight has a built-in motion sensor, which automatically turns on the light
when movement of a heat source (such as people, animals, or cars) is detected in the area. The light
remains on while motion continues to be detected in the area.
The Dual Head LED Security Spotlight has a LUX setting which can be adjusted to control the functioning of
the built-in photosensor so that the light only turns on at night.
The Dual Head LED Security Spotlight requires 3 C cell batteries (not included). The batteries typically
last up to 1 year under normal use. The shorter the time period used, the longer the batteries will last. The
spotlight may function irregularly or not at all at temperatures near or below freezing (2 Ëš F/ Ëš ) due to the 0-6 C
functionality of alkaline batteries. Normal operation will return when the temperature rises.
2
INCLUDED PARTS:
Carefully remove and identify all the parts from their protective packaging and lay them out in front of you.
Adjustment dials are located on the backside of the motion sensor as shown in the pictures below. Rotate
the motion sensor so you have access to the backside of it. This is the side that is opposite of the front,
denoted by an arrow and the word FRONT on the motion sensor.
INSTALLING / REPLACING THE BATTERIES:
When the batteries run out of power, you can replace the batteries with 3 new C-Cell batteries. Follow the
steps below when replacing the battery.
1. Switch the Dual Head LED Security Spotlight to OFF.
2. Remove the Dual Head LED Security Spotlight from its mounted back.
3. Remove the thumbscrew from the bottom of the back of the Dual Head LED Security Spotlight.
a. Gently press on the button on the top of the back of the Dual Head LED Security Spotlight and
pull the light away from the mounting bracket.
b. If replacing old batteries, carefully remove the old batteries from the battery tray by hand and
replace with three (3) new C-Cell batteries. If installing batteries for the î‚¿rst time, just insert
three (3) new C-Cell batteries into the battery tray. Ensure that the new batteries are inserted in
the correct +/- polarity orientation as indicated in the battery compartment.
WARNING: BATTERIES INSTALLED INCORRECTLY COULD POTENTIALLY DAMAGE THE UNIT.
4. Press the Dual Head LED Security Spotlight back into the mounted back until the top button clicks
into place. You will have to press the button down î‚¿rst to get the mount to slide in.
5. Replace the thumb screw in the bottom of the back of the Dual Head LED Security Spotlight.
6. Switch the Dual Head LED Security Spotlight back to AUTO
NOTE: DO NOT DISPOSE OF BATTERIES IN GENERAL HOUSEHOLD TRASH OR INTO A
FIRE SINCE THE BATTERIES MAY EXPLODE. CONSULT YOUR LOCAL REGULATIONS FOR
CORRECT DISPOSAL OF BATTERIES. DO NOT TAKE APART THE BATTERIES SINCE THEY
CONTAIN CORROSIVE CHEMICALS.
3
CHOOSING A LOCATION FOR YOUR DUAL HEAD LED SECURITY SPOTLIGHT:
This Dual Head LED Security Spotlight provides safety and security around your home. It is ideal for lighting
up areas where electricity is not available such as porches, driveways, carports outside, garages and
entrance areas.
When deciding where to mount the light, keep in mind that the motion sensor has a horizontal î‚¿eld of vision
of 130º at a distance of up to 26 feet when the surrounding temperature is 75°F. The outside temperature
will impact the detection distance. As temperatures get colder the motion sensor will become more sensitive
and the range of the motion sensor will increase.
HOW TO INSTALL YOUR DUAL HEAD LED SECURITY SPOTLIGHT:
TOOLS REQUIRED FOR INSTALL:
You only need a Phillips head screwdriver, however if you want to mount into harder surfaces like cement,
concrete, or brick, you will want to pre-drill holes.
Use the included mounting bracket and (2) screws to mount the Dual Head LED Security Spotlight securely
to a wall.
TO INSTALL THE MOUNTING BRACKET:
1. Remove the mounting bracket from the back of the light by unscrewing the
(one) thumb screw and pushing the button at the top of base of the light.
Be careful not to damage the mounting bracket as it also serves as the back of the light and the
battery cover.
2. Align the mounting bracket on the wall and mark the locations of the two holes to be drilled with a
pencil. Remove the mounting bracket from the wall.
3. Drill pilot holes for screws if needed. Screw anchors should be used for cement, brick, or similar
surfaces.
4. Align the mounting bracket on the wall and install the two screws using a screwdriver.
5. Press the Dual Head LED Security Spotlight back into the mounted back until the top button clicks
into place. You will have to press the button down î‚¿rst to get the mount to slide into place.
6. Replace the thumb screw in the base of the back.
Produktspezifikationen
| Marke: | Maxsa |
| Kategorie: | Bewegungsmelder |
| Modell: | 43218 |
Brauchst du Hilfe?
Wenn Sie Hilfe mit Maxsa 43218 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten
Bedienungsanleitung Bewegungsmelder Maxsa
11 September 2024
11 September 2024
Bedienungsanleitung Bewegungsmelder
- Bewegungsmelder Hama
- Bewegungsmelder Nedis
- Bewegungsmelder Philips
- Bewegungsmelder Brennenstuhl
- Bewegungsmelder Cotech
- Bewegungsmelder Velleman
- Bewegungsmelder Powerfix
- Bewegungsmelder Devolo
- Bewegungsmelder Eminent
- Bewegungsmelder Schwaiger
- Bewegungsmelder Alecto
- Bewegungsmelder Gira
- Bewegungsmelder König
- Bewegungsmelder Renkforce
- Bewegungsmelder Blaupunkt
- Bewegungsmelder Schneider
- Bewegungsmelder Abus
- Bewegungsmelder Olympia
- Bewegungsmelder Smartwares
- Bewegungsmelder Yale
- Bewegungsmelder Gigaset
- Bewegungsmelder Steinel
- Bewegungsmelder Perel
- Bewegungsmelder Nexa
- Bewegungsmelder GEV
- Bewegungsmelder Goobay
- Bewegungsmelder Acme
- Bewegungsmelder Marmitek
- Bewegungsmelder Honeywell
- Bewegungsmelder TP-Link
- Bewegungsmelder Black Box
- Bewegungsmelder IGet
- Bewegungsmelder Techly
- Bewegungsmelder Theben
- Bewegungsmelder Kopp
- Bewegungsmelder Steffen
- Bewegungsmelder Xavax
- Bewegungsmelder Hager
- Bewegungsmelder Chamberlain
- Bewegungsmelder JUNG
- Bewegungsmelder InLine
- Bewegungsmelder XQ-Lite
- Bewegungsmelder Optex
- Bewegungsmelder V-TAC
- Bewegungsmelder Desq
- Bewegungsmelder Kogan
- Bewegungsmelder Grothe
- Bewegungsmelder HQ
- Bewegungsmelder Busch-Jaeger
- Bewegungsmelder Swann
- Bewegungsmelder Merten
- Bewegungsmelder Orbis
- Bewegungsmelder Chuango
- Bewegungsmelder BTicino
- Bewegungsmelder Intertechno
- Bewegungsmelder Eaton
- Bewegungsmelder Speed-Link
- Bewegungsmelder Hikvision
- Bewegungsmelder Aqua Joe
- Bewegungsmelder Vemer
- Bewegungsmelder Arlo
- Bewegungsmelder Homematic IP
- Bewegungsmelder EQ3
- Bewegungsmelder Somfy
- Bewegungsmelder Berker
- Bewegungsmelder Elgato
- Bewegungsmelder ESYLUX
- Bewegungsmelder Interlogix
- Bewegungsmelder Joy-it
- Bewegungsmelder KlikaanKlikuit
- Bewegungsmelder Niko
- Bewegungsmelder Plugwise
- Bewegungsmelder Satel
- Bewegungsmelder Smanos
- Bewegungsmelder Steren
- Bewegungsmelder Suevia
- Bewegungsmelder Vimar
- Bewegungsmelder Dahua Technology
- Bewegungsmelder Inovonics
- Bewegungsmelder Legrand
- Bewegungsmelder Pentatech
- Bewegungsmelder Avigilon
- Bewegungsmelder Axis
- Bewegungsmelder EtiamPro
- Bewegungsmelder Chacon
- Bewegungsmelder Fibaro
- Bewegungsmelder Wentronic
- Bewegungsmelder Crestron
- Bewegungsmelder ORNO
- Bewegungsmelder Extron
- Bewegungsmelder Brinno
- Bewegungsmelder DSC
- Bewegungsmelder Tellur
- Bewegungsmelder Megatron
- Bewegungsmelder Vernier
- Bewegungsmelder Gewiss
- Bewegungsmelder ALC
- Bewegungsmelder Bitron
- Bewegungsmelder RAB
- Bewegungsmelder BEA
- Bewegungsmelder Ledvance
- Bewegungsmelder Pepperl+Fuchs
Neueste Bedienungsanleitung für -Kategorien-
10 Oktober 2024
6 Oktober 2024
3 Oktober 2024
27 September 2024
Busch-Jaeger Sicherheitstechnik 6800-0-2521 Bedienungsanleitung
17 September 2024
15 September 2024
14 September 2024
10 September 2024
10 September 2024
10 September 2024