Maxsa 40234 Bedienungsanleitung

Maxsa Bewegingsdetector 40234

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Maxsa 40234 (16 Seiten) in der Kategorie Bewegingsdetector. Dieser Bedienungsanleitung war für 5 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF
Seite 1/16
MODELS #40234
#40235
#40236
OPERATING INSTRUCTIONS
Solar Motion-Activated Wedge Light
IMPORTANT: READ ALL INSTRUCTIONS CAREFULLY BEFORE USE
ABOUT YOUR SOLAR WEDGE LIGHT
During the day, the solar cell charge panel on this MAXSA Solar Wedge
Light converts sunlight into electricity recharging the batteries. Using this
stored energy, the LED light (built into this Solar Security Light) turns on
automatically at night when motion is detected. This MAXSA Solar Wedge
Light turns on for 4 minutes each time motion is detected in the area.
This unit includes 3 AA rechargeable batteries, which will need to be
replaced when the charging ability is decreased.
CHOOSING A LOCATION FOR YOUR SOLAR WEDGE LIGHT
This Solar Wedge Light has a built-in solar panel. For optimum sun exposure and longer
light output, place the light with the solar panel in a position that receives at least 6-8
hours of direct sunlight per day. Ideally, the solar panel should face south. Placing the
solar panel in a shaded location will not allow the batteries to charge fully. This will
reduce the number of hours the Solar Wedge Light will operate per evening. In choosing
a location for your Solar Wedge Light, ensure that the solar panel is not placed near
night time light sources such as porch lighting or street lighting.
This Solar Wedge Light is ideal for areas where electricity is not available, including
driveways, carports, garages and entrance doors, for safety and security around your
home. In addition to the safety and security benefits of this Solar Wedge Light, it can
also be used for convenience lighting and is ideal for use on backyard sheds, farm
sheds, RV's and other remote areas where electricity is not available.
When deciding where to mount the light, keep in mind that the motion sensor that
activates this light has a field of vision of 100° (horizontal) at a distance of 22 feet when
the surrounding temperature is 77° F.
BEFORE FIRST TIME USE OF YOUR SOLAR WEDGE LIGHT
1. Ensure the power switch on the main body of your Security Light is in the OFF
position. In this position the solar cell will charge the batteries without activating the
light.
2. Leave the switch in this position for up to 3 days and make sure the solar panel is
placed in direct sunlight. This will ensure that the batteries in your Solar Security Light
have a full charge prior to normal operation.
OPERATING YOUR SOLAR WEDGE LIGHT
Your Solar Wedge Light will be ready for use at the end of the initial 3 day charging
period. You can now move the switch to AUTO if you want the light to be motion-
activated when it's dark or you can move the switch to ON if you want the light to stay on
all the time.
100°
Front View
Side View
2.3 ft 15 ft 22 ft
6.5 ft
2
HOW TO INSTALL YOUR SOLAR WEDGE LIGHT
The Solar Wedge Light can be mounted vertically or horizontally onto a solid surface
using the supplied mounting bracket, wood/sheet metal screws, and anchors.
If you are placing the light on a flat surface, mounting is not required. Remember it is
best to face the panel south for direct sunlight exposure.
The included mounting bracket and screws can be used to mount the Solar Wedge Light
securely to a wall or other stable surface.
To install the mounting bracket with screws:
1. Remove the mounting bracket from the bottom of the Solar Wedge Light by inserting
the key into the keyhole and twisting the key counter-clockwise to the OPEN
position.
2. If you are mounting the bracket on a very hard surface, you may need to drill holes
for the screws first. The included screw anchors can be used for drywall, cement,
brick, or similar surfaces.
3. Align the mounting bracket and install the two screws using a Phillips screwdriver.
4. Place the Solar Wedge Light onto the mounting bracket.
5. Insert the key into the keyhole and twist the key clockwise to the LOCK position.
6. Remove the key and gently nudge the Solar Wedge Light to make sure that it is
securely mounted.
3

Produktspezifikationen

Marke: Maxsa
Kategorie: Bewegingsdetector
Modell: 40234

Brauchst du Hilfe?

Wenn Sie Hilfe mit Maxsa 40234 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten


Bedienungsanleitung Bewegingsdetector Maxsa

Maxsa

Maxsa 40234 Bedienungsanleitung

11 September 2024
Maxsa

Maxsa 43218 Bedienungsanleitung

11 September 2024

Bedienungsanleitung Bewegingsdetector

Neueste Bedienungsanleitung für -Kategorien-

Busch-Jaeger

Busch-Jaeger 2CKA006200A0056 Bedienungsanleitung

15 September 2024
DSC

DSC PG9862 Bedienungsanleitung

14 September 2024
ORNO

ORNO OR-CR-233 Bedienungsanleitung

10 September 2024
ORNO

ORNO OR-CR-219 Bedienungsanleitung

10 September 2024
ORNO

ORNO OR-CR-232 Bedienungsanleitung

10 September 2024
ORNO

ORNO OR-CR-231 Bedienungsanleitung

10 September 2024
Eminent

Eminent EM8650 Bedienungsanleitung

10 September 2024
Honeywell

Honeywell DT8012F4 Bedienungsanleitung

9 September 2024
JUNG

JUNG BTLC17181244 Bedienungsanleitung

6 September 2024
JUNG

JUNG BTLC17182250 Bedienungsanleitung

6 September 2024