Lowell ACSP-1502-VTE Bedienungsanleitung

Lowell Nicht kategorisiert ACSP-1502-VTE

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Lowell ACSP-1502-VTE (3 Seiten) in der Kategorie Nicht kategorisiert. Dieser Bedienungsanleitung war für 7 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF

Seite 1/3

INTERNAL USE ONLY: PN 24236

Lowell strives to provide accurate information while reserving the right to change specications and/or improve manufacturing methods without prior notication.

Spec 1740

Model ACSP-1502-RPC Rev. 06-22-21 | pg. 1/3

Lowell’s Advanced Surge Suppression provides multiple layers of protection for

equipment on a single circuit. With TCR technology (Triple Clamping Redundancy),

these advanced devices can protect sensitive equipment from harmful power surges

and spikes up to 72,000A, when fully active.

FEATURES

• LED Status Indicators (3): Each LED lights when protection is active

for its associated stage (1, 2, or 3). An LED will not light if its associated

stage is not functioning (alerting user to repair/replace the unit).

• No Ground Contamination: Suppresses line to neutral with no ground wire con-

tamination.

• 1.75” x 6” x 9”Low-prole Chassis:

• Convenient Access: Patented* outlet plate can be rotated 90˚ for front or side

access to outlets, making it easier to accommodate unwieldy power cords.

• Mounting Aids: Universal mounting brackets mount the SPD to a wall, under a

counter, or inside a rack.

• Approvals: ETL Listed (conforms to UL1449-4). ANSI C62.41 Compliant.

• Warranty: 10 year limited factory warranty.**

• Model ACSP-1502-RPC:

– RPC Remote Power Control: This unit can be controlled by a low-

voltage sequencer, switch or control system that provides a maintained

dry contact closure (order separately).

– Two (2) NEMA 5-15R outlets

– 6 ft. cord with NEMA 5-15P plug

A&E SPECIFICATIONS

The 15A single-circuit surge protector shall be Lowell model ACSP-1502-RPC with

two single outlets. It shall protect the line to neutral without ground wire contamina-

tion. It shall be capable of protecting electronic equipment from transient voltages,

spikes and surges up to 72,000A and have a response time of less than 5 nano-

seconds. It shall include mounting brackets and two 15A outlets mounted on a plate

that can be rotated 90º for front or side access. It shall include LED status indicators.

It shall include remote power control capability (by low-voltage sequencer, switch or

control system that provides a maintained dry contact closure, not included). It shall

be ETL Listed and conform to UL1449-4 and ANSI C62.41

Advanced Surge Suppression ACSP-1502-RPC

ACSP SERIES SUMMARY

VTE Over/Under RPC Remote Power Limited

Model No. Amperage Outlets Termination Voltage Protection Control Circuittry Warranty

ACSP-1502-VTE 15A (2) NEMA 5-15R 6' detachable cord Yes --- 10 years

ACSP-2002-VTE 20A (2) NEMA 5-20R 6' cord Yes --- 10 years

ACSP-1502-RPC 15A (2) NEMA 5-15R 6' detachable cord --- Yes 10 years

ACSP-2002-RPC 20A (2) NEMA 5-20R 6' cord --- Yes 10 years

ACSP-2002-RPC-HW 20A (2) NEMA 5-20R 6' flexible conduit --- Yes 10 years

* U.S. Patent No. D535178S

** 10 year warranty limited to repair or replacement of unit at manufacturer’s option (original purchaser only).

Remot e

Power Control S

Normal

Test

Com

V+

MADE IN U.S.A.

WITH GLOBAL

COMPONENTS

Lowell strives to provide accurate information while reserving the right to change specications and/or improve manufacturing methods without prior notication.

Spec 1740

Model ACSP-1502-RPC Rev. 06-22-21 | pg. 2/3

Remove screws from plate

(2 front, 2 top).

Pull plate out from chassis.

Rotate plate so outlets are

on top; reinstall screws.

MECHANICAL SPECIFICATIONS:

Dimensions 9"W x 1.75"H x 6"D ...........................

Weight 5 lbs. ..................................

Input Connections Detachable IEC cord with NEMA 5-15P plug ..................

Output Connections................ (2) single 15A receptacles mounted on 90˚ rotatable plate

Chassis Steel with black powder epoxy nish .................................

Mounting (2) brackets ...............................

PERFORMANCE SPECIFICATIONS:

Operating Voltage/Current ...... 120VAC / 15A, 60Hz

Maximum Surge Current 72,000A (exceeds UL1449-4 6000V, 3000A) ........

Initial Clamping Voltage .......... 205V, UL rating 400V

Endurance IEEE C62.41-1991, B3 (C1), Pulses (lifetime): 1kv≥1,000,000; 3kv≥100,000; 6kv≥5000 .............................

Transient Noise Reduction 29dB@100kHz, 70dB@1MHz ......

Response Time ...................... Less than 5 nanoseconds

Operating Temperature ........... 25˚C (77˚F) nominal

Protection Mode Line to neutral, zero ground leakage ....................

UL1449-2 Adjunct Results ...... 1000 surges, 6000 volts, 3000A, C1, and B3 waveforms (IEEE C62.41), NO FAILURES

Federal GSA specs (1996) Grade A, Class 1, Mode 1 ......

Diagnostic LEDs (surge)** One green LED for each stage. All stages active when all lit. .......

Applicable Standards Conforms to UL1449-4, IEEE standard 587-80 A & B, IEEE standard C62.41-1991, IEC .............

1000-4-5-1995 (IEC 801-5).

Safety Agency Approvals......... ETL Listed US and Canada

Surface-mount with brackets

exposed.

Surface-mount with brackets

concealed behind unit.

Mount inside rack to the rail

supports or 10-32 tapped rail.

ACCESSIBLE OUTLETS: ROTATING THE OUTLET PLATE.

MOUNTING BRACKETS:

** TCR surge suppression technology provides the assurance of Grade A, Class 1, Mode 1 endurance and performance with visual diagnos-

tic LEDs. Three stage SPD (surge protective device) has a green LED indicator for each stage to show on-line status. If one stage goes

off-line, remaining stages still provide protection at the same clamping level. In the unlikely event that one or more stages goes off-line,

contact Lowell for repair or replacement under the unit’s 10 year warranty.

INTERNAL USE ONLY: PN 24223

INTERNAL USE ONLY: PN 24236

Lowell strives to provide accurate information while reserving the right to change specications and/or improve manufacturing methods without prior notication.

Spec 1740

Model ACSP-1502-RPC Rev. 06-22-21 | pg. 3/3

REMOTE POWER CONTROL: OPTIONS

TCR

Surge ecProt tion

Remote

Power Cont ol

Switch

Common

V+

Active When Lit

Mode

Normal

Test

No connection

TCR

Surge ecProt tion

Remote

Power Control

Switch

Common

V+

Do NOT co ecnn t V+ to

‘Common’ or ‘Switch’ terminals

Switch

Common

N. .O

Normally Open

N.C.

Normally Closed

Compatible

sequencer

REMOTE POWER CONTROL

using Lowell (classic) sequencer *

* NOTE: This unit is only compatible with a sequencer from the Classic

Connection series. It is not compatible with Pass-through sequencers.

For additional control connections, see the FAQ page on the

website (www.Lowellmfg.com/Resources). Power Question P3

REMOTE POWER CONTROL

using a switch or control system (by others)

that provides a maintained dry contact closure.

Active When Lit

Mode

Normal

Test

REMOTE POWER CONTROL

using Lowell RPS Series switches

TCR

Surge ectProt ion

Remote

Power Cont ol

Active When Lit

Mode

Normal

Test

Maintained closure SPST

(single pole single throw) switch

with rocker or key activation

Switch

(Sw)

Com Com

V+

Switch

+24v

Green LED

3 conductor

Minimum Size: 24 ga.

Maximum Distance: 6000 ft.

AC power is applied

to receptacles when

connection is made

between “Common”

and “Switch”

terminals.

2.2K 1/2W

Resistor

Schematic

Produktspezifikationen

Marke:	Lowell
Kategorie:	Nicht kategorisiert
Modell:	ACSP-1502-VTE
Breite:	228.6 mm
Tiefe:	152.4 mm
Gewicht:	4535 g
Produktfarbe:	Schwarz
Höhe:	44.45 mm
Stecker:	NEMA 5–15P
AC Eingangsfrequenz:	60 Hz
Kabellänge:	1.8 m
LED-Anzeigen:	Status
Anzahl der AC-Ausgänge:	2 AC-Ausgänge
AC-Steckertypen:	NEMA 5–15R
Nominale Eingang Spannung:	120 V
Gewährleistungsfrist:	10 Jahr(e)
Nominale Stromabgabe:	15 A
Überstromschutz:	Ja
Anstieg der Energiemenge:	72000 J