Lowell ACS-2020-IG-10C-HW Bedienungsanleitung

Lowell niet gecategoriseerd ACS-2020-IG-10C-HW

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Lowell ACS-2020-IG-10C-HW (3 Seiten) in der Kategorie niet gecategoriseerd. Dieser Bedienungsanleitung war für 2 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF

Seite 1/3

INTERNAL USE ONLY: PN 24232

Lowell strives to provide accurate information while reserving the right to change specications and/or improve manufacturing methods without prior notication.

Spec 1834

Model ACS-2020-IG-10C-HW | Rev. 12.20.23 | pg. 1/3

POWER RATING: 120VAC, 60Hz, 20A (each circuit)

CHASSIS: 60” x 2” x 2” steel chassis with black powder epoxy finish

TERMINATION: Hardwired 6 ft. non-metallic flexible conduit (whip) rotates in any direction.

It can be trimmed in the field if needed.

CIRCUITS & RECEPTACLES: A total of 20 insulated ground (isolated ground, I.G.) recep-

tacles (10 duplex) are wired into 10 independent cicuits.

• Each circuit powers one (1) NEMA 5-20R I.G. duplex receptacle

• Connections are made via numbered pigtail leads.

UNIVERSAL MOUNTING BRACKETS: The universal brackets allow for power strip instal-

lation in a variety of applications with receptacles facing front, center or rear. Brackets are

engineered with multiple mounting points and include two types of hardware to facilitate

easy installation in a rack with adjustable or fixed rails, to a wall, or under a desk/counter.

The brackets can be mounted so they are exposed for easy access or concealed beneath

the power strip for an aesthetically cleaner installation.

CERTIFICATION: ETL Listed in U.S./Canada

ORIGIN: Assembled in U.S.A. with U.S. steel chassis and global components

Ten-circuit power strip with twenty NEMA 20A insulated ground receptacles (10 duplex), for

installations requiring multiple AC power circuits, includes universal mounting brackets with

hardware.

ACS Series Model No.

ACS-2020-IG-10C-HW

AC Power Strip w/Ten Circuits

FEATURES

Certied

US Steel

Assembled

In USA

with Global

Components

A&E SPECIFICATIONS

The 20A power strip with 10 independent circuits shall be Lowell model ACS-2020-IG-10C-

HW. It shall feature 20 isolated ground (I.G.) NEMA 5-20R receptacles (10 duplex). The pow-

er strip shall terminate via a six-foot non-metallic flexible conduit with a rotating connector

and pigtail leads tagged for circuits 1-10. The power strip chassis shall measure 60” x 2”

x 2” and shall be steel with black powder epoxy finish. It shall include universal mounting

brackets. The power strip shall be made in the U.S.A. with global components.

CIRCUIT 1:

One NEMA 20A I.G.

duplex receptacle

(behind conduit)

Non-metallic exible

conduit rotates in any

direction.

CIRCUIT 2:

One NEMA 20A I.G.

duplex receptacle

CIRCUIT 3:

One NEMA 20A I.G.

duplex receptacle

CIRCUIT 4:

One NEMA 20A I.G.

duplex receptacle

CIRCUIT 5:

One NEMA 20A I.G.

duplex receptacle

CIRCUIT 7:

One NEMA 20A I.G.

duplex receptacle

CIRCUIT 9:

One NEMA 20A I.G.

duplex receptacle

CIRCUIT 6:

One NEMA 20A I.G.

duplex receptacle

CIRCUIT 8:

One NEMA 20A I.G.

duplex receptacle

CIRCUIT 10:

One NEMA 20A I.G.

duplex receptacle Mounting

brackets

Pigtail leads are

tagged according

to circuit for easy

identication.

INTERNAL USE ONLY: PN 24232

Lowell strives to provide accurate information while reserving the right to change specications and/or improve manufacturing methods without prior notication.

Spec 1834

Model ACS-2020-IG-10C-HW | Rev. 12.20.23 | pg. 2/3

3) REATTACH CONNECTOR:

Twist/push the connector to attach it to

the shortened conduit.

1) REMOVE EXCESS LENGTH:

Snip reinforcing rib at desired length.

Bend the conduit to expose the cut and

carefully cut around the conduit without

cutting the wires inside. Remove excess

length.

2) REMOVE CONNECTOR:

Carefully snip the last rib(s) to loosen the

connector from the excess length, then

twist/pull to remove it.

UNIVERSAL MOUNTING BRACKETS: The brackets can be mounted exposed for easy access or concealed for a cleaner install. Includes

variety of hardware for versatile installation.

HOW TO TRIM THE CONDUIT: The 6 ft. non-metallic flexible conduit can be trimmed in the field.

(4) 1/4"-20 x 1/2" screws

(4) at nuts

(4) 10-32 x 1/2" screws

(4) cage nuts

(4) Brackets

RACK w/ ADJUSTABLE RAILS

(side mount : Mount to horizontal side )

supports with universal brackets, 1/4"-20

screws, flat nuts.

RACK w/ ADJUSTABLE RAILS

(rear mount): Mount to rear rail with

universal brackets, 10-32 screws.

RACK w/ FIXED POSITION RAILS

(and rear Z-angle bracket): Mount to

Z-angle with universal brackets, 10-32

screws, cage nuts.

INTERNAL USE ONLY: PN 24232

Lowell strives to provide accurate information while reserving the right to change specications and/or improve manufacturing methods without prior notication.

Spec 1834

Model ACS-2020-IG-10C-HW | Rev. 12.20.23 | pg. 3/3

T H I S

SPEC

SERIES SUMMARY

Power NEMA Chassis Chassis On/Off Surge Remote Mounting Country

Model No. Rating Receptacles Circuits Length Pro le Termination Switch Suppression Power Control Aids of Origin

ACS-1505-SW 15A 5 (15A) 1 12" Standard 6' Det. cord Yes --- --- Brackets U.S.

ACS-1505-SW-SD 15A 5 (15A) 1 12" Standard 6' Det. cord Yes 2-stage --- Brackets U.S.

ACS-1506 15A 6 (15A) 1 20" Low 6' Fixed cord --- 1-stage --- Clips China

ACS-1506-WW 15A 6 (15A) 1 12" Low 6' Fixed cord --- --- --- Screws U.S.

ACS-1507 15A 7 (15A) 1 12" Low 6' Det. cord --- --- --- Screws U.S.

ACS-1512 15A 12 (15A) 1 32" Low 12' Fixed cord --- 1-stage --- Clips China

ACS-1524 15A 24 (15A) 1 60" Low 12' Fixed cord --- 1-stage --- Clips China

ACS-1524-2C 15A 24 (15A) 2 70" Low Pigtail leads --- --- --- Clips China

ACS-2012 20A 8 (15A) + 4 (20A) 1 32" Low 12' Fixed cord --- 1-stage --- Clips China

ACS-2024 20A 16 (15A) + 8 (20A) 1 70" Low 12' Fixed cord --- 1-stage --- Clips China

ACS-2014-HW 20A 14 (20A) 1 30" Standard 6' Conduit --- --- --- Brackets U.S.

ACS-2014-2C-HW 20A 8 (15A) + 6 (20A) 2 30" Standard 6' Conduit --- --- --- Brackets U.S.

ACS-2020-6C-HW 20A 20 (20A) 6 60" Standard 6' Conduit --- --- --- Brackets U.S.

ACS-2020-IG-6C-HW 20A 20 (I.G. 20A) 6 60" Standard 6' Conduit --- --- --- Brackets U.S.

ACS-2020-IG-10C-HW 20A 20 (I.G. 20A) 10 60" Standard 6' Conduit --- --- --- Brackets U.S.

ACS-2024-2C 20A 24 (20A) 2 70" Low Pigtail leads --- --- --- Clips China

ACS-1510-RPC 15A 10 (15A) 1 30" Standard 6' Det. cord --- --- Yes Brackets U.S.

ACS-2010-RPC-HW 20A 10 (20A) 1 30" Standard 6' Conduit --- --- Yes Brackets U.S.

ACS-2018-5C-RPC-HW 20A 18 (20A) 5 60" Standard 6' Conduit --- --- Yes Brackets U.S.

ACS-2018-5C-RPCP-HW 20A 18 (20A) 5 60" Standard 6' Conduit --- 1-stage Yes (P) Brackets U.S.

Chassis Pro le = Standard pro le (2" x 2"), Low pro le (1.625" x 1.375")

Termination = Det. cord (detachable cord), Fixed cord (cord is attached–cannot be removed), Conduit (non-metallic  exible whip w/pigtail leads), Pigtail leads (leads at ends of chassis—no whip)

Switch = Yes (On/off rocker switch)

Surge Suppression = 1-stage (basic surge protection), 2-stage (surge protection with backup)

Remote Power Control = Some receptacles are controlled by a remote switch or sequencer (ordered separately); (P) indicates compatibility with Lowell P-Series pass-through sequencers.

Mounting Aids = Brackets (multi-hole brackets with hardware), Clips (clips and screws with wire tires), or Screws (power strips can mount to rear of US or USV Series shelves).