Jaybird JF4 Bedienungsanleitung


Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Jaybird JF4 (1 Seiten) in der Kategorie Kopfhörer. Dieser Bedienungsanleitung war für 11 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/1
IN THE BOX
JF4 Freedom Sprint Bluetooth Headphones
Magnet Sealed JayBird Carry Case
3 pairs regular eartips (S,M,L)
3 pairs secure fitting ear cushions (S,M,L)
1 pair of optional ear hooks
USB Cable
User Manual
CHARGING
Charging the battery before use is recommended but
not required. The headphones ship pre-charged
however initial charge will vary.
Low battery is indicated by the status indicator blinking
red with an audible tone every 20 seconds. Connect
micro USB charging cable with the charging port of
headphones under the USB cover on the right earpiece.
Connect cable to the USB slot of any PC or Mac. The
status indicator will be red while charging and will turn
off when fully charged. JayBird also offers an AC power
adapter (sold separently).
PAIR MODE
Begin with headphones powered off.
Push and hold top button for 8 seconds
until status light alternates red and blue. You
are now in pair mode. See your phone/music
device manual for pair instructions.
Pass code is 0000.
8 sec
PAIR MODE (detailed step by step instructions)
1. Place headphones and mobile phone within 1 meter of each other.
2. Put headphones into pair mode by pushing top button for 8 seconds (LED will flash red & blue).
3. On your music device, turn Bluetooth on and search for Bluetooth devices.
Select “Freedom 4” in the Bluetooth device list.
4. Enter password or PIN No:”0000” on your mobile phone if prompted.
5. If required, after pairing, select “Freedom 4” in the Bluetooth device list and press “connect”.
6. After successful connecting, the blue light blinks twice every 4 seconds.
PAIRING WITH A BLUETOOTH ADAPTER
1. Place headphones and mobile phone within 1 meter of each other.
2. Put the headphones into pair mode as outlined on prior page.
3. If using BAU Universal Bluetooth Adapter put adapter into pair mode also (see BAU manual).
4. Plug the Bluetooth adapter into the music device and play a song.
5. The headphones and adapter will pair automatically (pass code of adapter must be 0000)
6. After successful pairing and connecting, the LED status indicator on the headphones will blink
twice every 4 seconds.
POWER ON/OFF
Power on: Push & hold top button for 6 seconds.
Power off: Push & hold top button for 3 seconds.
Note
- If the pairing is not successful, switch off headphones by pushing the top button for 3 seconds, and then re-pair according to the steps outlined above.
- After pairing is successful, paired devices will remember each other. Unless pairing information is deleted, there is no need to pair again.
- The headphones will connect with the latest paired device. If you want to pair with other Bluetooth devices, switch off the Bluetooth function of the
current Bluetooth device, and then pair and connect it with the new Bluetooth device according to steps outlined above.
Note
Freedom Sprint does not support apt-X CD quality audio even though it’s offered on JayBird Bluetooth adapters.
PAIRING WITH SEVERAL BLUETOOTH DEVICES
The headphones can connect with two devices at most. A mobile phone with
HFP profile; and a device with A2DP profiles. If you want to pair two Bluetooth
devices, please refer to the following steps.
1. Firstly, pair the headphones with the Bluetooth adapter
2. Disconnect the Bluetooth adapter from the iPhone or iPod
3. Pair and connect the headphones with the mobile phone
4. Reconnect the Bluetooth adapter, will connect with headphones automatically.
Not all the mobile phones support all the functions listed. Please refer to the instruction of your mobile phone. When the volume is adjusted to max or min,
you will hear a indication sound. For some mobile phones, when you accept a call on the phone, the call will be sent to the mobile phone. You can switch the
call to headphones by using top button on headphones or through phone. Please refer to the instruction of your mobile phone for further information.
Function Status Indication Operation
Voice dial Standby mode Short tone Press & hold top button for 2 seconds
Redial Standby mode Short tone Double click top button
Volume Up Music/Call mode NA Short presses of Vol+ button
Volume Down Music/Call mode NA Short presses of Vol - button
Answer Call Incoming Call Short tone Press top button
Reject Call Incoming Call Short tone Press & hold top button for 2 seconds
End Call During Call Short tone Press top button
During Call Short tone Press & hold top button for 2 seconds
Mute During Call Dbl tone 5 sec Double click top button
Unmute During Call NA Double click top button
Switch b/w phone
& headset mode
Note
Mobile phones that support HSP and A2DP profiles simultaneously may block the
Bluetooth adapter from reconnecting to the headphones.
Key
Short push of adjacent button
Push and hold of adjacent button
For some of mobile phones, when they are playing music, the music will transmit to the speaker of mobile phone. If this happens, select “transmit the
sound through Bluetooth” in the “setting” of music play interface, and then choose "Freedom 4” in the device list. Please refer to the instruction
of your mobile phone for further information. When the volume of headphones is adjusted to max or min,you will hear a tone. Remote control the
function such as next track, previous track, etc require your mobile phone to support AVRCP. Please refer to your mobile phone user manual or
Bluetooth transmitter for further info.
Function Status Indication Operation
Volume up Music/Call mode NA Short presses of Vol+ button
Volume Down Music/Call mode NA Short presses of Vol - button
Play/Pause Music Mode Short tone Press top button
Next track Music Mode Short tone Long press of Vol - button
Back track Music Mode Short tone Long press of Vol + button
Charging LED Indicator Status of headphones
Red light is on Charging
Red light is off Finished charging
Pairing LED Indicator Status of headphones
red and blue alternating Pair Mode
Blue double blink every 2 sec Standby mode
Blue periodic blinking Connected to device
Red double blinking over 30 sec Low battery
Tone Indicator Status of headphones
Two tones every 5 sec Conversation mode and mic mute
Tone every 30 seconds Low battery
JF4 Specifications
Bluetooth Version V2.1 + EDR
(newer versions offer no
benefits for headphones)
Profile Headset, handsfree, A2DP, AVRCP
Effective Range 10 meters (30 feet)
Working time Music & calls up to 4.5 hours
Standy time Up to 150 hours
Input voltage DC 5A 100mA
Charging time Approximately 2 hours
Dimensions 16 x 35 x 8 mm
Weight Approx 16 g
Care and maintenance
Keep dry and do not store in a damp place
Do not put the product in direct sunlight for extended periods of time
or in hot areas.
High temperature will shorten the life of the electronic device, destroy
the battery, and distort certain plastic.
Do not expose the product to extreme cold.
Do not disassemble the product.
Do not drop the headphones.
Do not use chemicals or detergent to clean the product.
If the product fails to work contact JayBird support at jaybirdgear.com
INSTALL EAR CUSHIONS
Three sizes of patented
secure fit ear cushions
are included. The correct
size for your ear will be
the ones which fit snugly
into the bowl of your ear
and lock into the top as
shown. Further guidance
on the next 3 pages.
01 LEFT (L) AND RIGHT (R) MARK ON TOP SIDE
CUT AWAY FOR POSITIONING GUIDANCE
02
OUTDOORS / GYMS
KEEP THE MUSIC DEVICE AT OR ABOVE WAIST LEVEL ON YOUR RIGHT SIDE
THE SAME SIDE AS THE HEADPHONE ANTENNA.
Your body is 80% water. Water blocks low power radio signal like Bluetooth.
In the absence of nearby ceilings for signal bounce, your body can block the
signal between the music device and the headphones. When outdoors or in
gyms the use of armbands or wrist-worn music players are recommended.
Having your music player in your pants pocket below waist level may produce
varied results as your body can get between the music device & headphones.
03
L M S
LOCK THE TIP OF THE EAR
CUSHION INTO THE TOP OF
THE BOWL OF THE EAR AS
SHOWN.
YOU SHOULD HAVE A SNUG
FIT WITH CONTACT ON THE
LOWER, BACK AND TOP
PORTIONS OF THE BOWL OF
THE EAR.
WHEN OUTDOORS WEAR
YOUR MUSIC DEVICE IN
THIS ZONE TO AVOID
SIGNAL BLOCKAGE
FROM YOUR BODY.
HAVING THE DEVICE IN A
POCKET ON YOUR LEG MAY
PRODUCE VARIED RESULTS
AS YOUR UPPER BODY CAN
GET BETWEEN THE DEVICES.
LET US TAKE CARE OF YOU
TAKE A MOMENT TO REGISTER YOUR
LIFETIME WARRANTY AGAINST SWEAT
jaybirdgear.com/intheclubnow
No login or account setup required.
04 TAKE CARE OF YOURSELF AS WELL
& LISTEN RESPONSIBLY
Avoid excessive volume levels
and prolonged periods of listening.
Do not use around road traffic.
USER GUIDE
FREEDOM SPRINT BLUETOOTH HEADPHONES (JF4)
BEFORE WE GET STARTED REMEMBER THESE 4 THINGS...
COMMANDS
WARRANTY
Full warranty details at jaybirdgear.com/warranty
+1.866.244.3399
WARNING: Due to the isolating characteristics of these headphones do not use while driving, Riding a bike or where vehicular traffic
is present, or in any other activity where failure to hear surrounding sounds could be dangerous. Use of these headphones at
excessive volumes may cause permanent hearing damage. Always turn the volume down before use. Take caution in regards to
inserting objects into ear canal, use at own risk.
Copyright 2011 JayBird Gear LLC. All rights reserved. JayBird, and the JayBird logo are trademarks of JayBird Gear LLC.
Bluetooth is a trademark owned by Bluetooth SIG, Inc. USA, and licensed to JayBird Gear LLC. iPhone is a trademark of
Apple, Inc., registered in the U.S. and other countries. Manufactured under European patent no EP1410607B1 &
corresponding foreign patents
.
Assembled in China
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause
harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Any changes or modifications to device will void the user’s authority to operate the device. The battery is recycled.
Do not dispose of the battery in fire, as it may cause explosion.
TO COVER ALL FITTING
PREFERENCES, EARHOOKS
ARE INCLUDED AS AN
ALTERNATIVE SECURE FIT
OPTION.
MAKING A CALL PLAYING MUSIC
STATUS LIGHT SPECIFICATIONS & CARE
01 02
03 04
05 06
07 08
09 10
11 12
13 14
15 16
17 18
19 20
21 22
3 or 6 sec
LED status light
GREAT SOUND PERFORMANCE IS IN
SELECTING THE RIGHT SIZE EARTIP
WE LOVE GREAT SOUND. MAKE SURE YOU HEAR IT.
Because everyone’s ears are different, make sure to try out all sizes of
eartips. Only with the perfect size eartips will you enjoy snug fit &
optimum sound quality.


Produktspezifikationen

Marke: Jaybird
Kategorie: Kopfhörer
Modell: JF4

Brauchst du Hilfe?

Wenn Sie Hilfe mit Jaybird JF4 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Kopfhörer Jaybird

Bedienungsanleitung Kopfhörer

Neueste Bedienungsanleitung für -Kategorien-