Intellinet 562102 Bedienungsanleitung

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Intellinet 562102 (16 Seiten) in der Kategorie niet gecategoriseerd. Dieser Bedienungsanleitung war für 4 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/16
Scan to
register your
product warranty
Important: Read before use. • Importante: Leer antes de usar.
For additional benets:
or go to: register.intellinet-network.com/r/562102
10-Port PoE+ Switch with 8 Fast
Ethernet Ports and 2 FE Uplinks
Instructions
Model 562102 (IPS-08F02-95W)
2
Front Panel
All ports on the switch support Auto-MDI/MDI-X functionality, so crossover cables
and uplink ports are not needed for connections to PCs, routers, other switches, etc.
Cat5e/6/6a UTP/STP cables provide optimal performance; if a status LED doesn’t
indicate a link, check the corresponding device for proper setup and operation.
Slide Switch
Default: All ports can communicate with each other.
VLAN: Ports 1 to 8 are isolated from each other while
allowing them to connect to ports 9 and 10.
PoE Extend: Extend Ethernet connection up to 250 m (820 ft.)
*NOTE: Changing the mode automatically applies the corresponding
conguration without the need for a manual restart.
English
Instructions
The Intellinet Network Solutions 10-Port PoE+ Switch with 8 Fast Ethernet Ports and 2 FE Uplinks
passes both data and electrical power to PoE-compatible devices via standard Cat5e, Cat6 or
Cat6a network cables. Equipped with eight PoE+ ports, this switch can power wireless LAN
access points and bridges, VoIP phones, IP video cameras and more while delivering network
speeds up to 100 Mbps. This guide presents the basic steps to set up and operate this device.
For the user manual and specifications, visit . Register your product intellinet-network.com
at register.intellinet-network.com/r/562102 or scan the QR code on the cover.
LED Color Status Operation
PWR Green On Power On
Off Power Off
Link/Act Green
On Valid port connection at 10/100 Mbps
Flashing Sending or receiving data
Off No device is connected to the port.
PoE Orange
On The connected powered device is receiving power.
Flashing Abnormal power supply
Off No powered device (PD) is connected to the port.
PoE Max Green On The system has reached a total power output of 80%
Off The PoE total is nearing its maximum level
3
English
Rear Panel
Power
The device is compatible with DC 55V, 2A. Plug the provided power
adapter into the designated DC interface on the switch.
Chassis Ground Column
Located on the side of the power supply connector, a grounding terminal connector is used to
provide proper grounding for your Intellinet Network Solutions switch. If you use the chassis
grounding screw, it should be wired to an object that provides earth ground. In rackmount
installations, grounding is typically provided by the metal frame of the mounting rack.
Placement
Prior to use, it is recommended that the switch be placed / positioned:
• on a level surface that can support the weight of the switch
• with a minimum of 25 mm (approx. 1”) of clearance
on the top and sides for adequate ventilation
• away from sources of electrical noise: radios,
transmitters, broadband ampliers, etc.
• where it cannot be aected by excessive moisture
Desktop Installation
Attach the rubber feets to the corners on the bottom
side of the Switch to prevent external vibrations.
Wall-mount Installation
Install two screws into the wall at the distance of
the spaces on the back of the switch.
Instructions

Produktspezifikationen

Marke: Intellinet
Kategorie: niet gecategoriseerd
Modell: 562102

Brauchst du Hilfe?

Wenn Sie Hilfe mit Intellinet 562102 benĂśtigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung niet gecategoriseerd Intellinet

Bedienungsanleitung niet gecategoriseerd

Neueste Bedienungsanleitung fĂźr -Kategorien-