Intellinet 562034 Bedienungsanleitung


Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Intellinet 562034 (10 Seiten) in der Kategorie Nicht kategorisiert. Dieser Bedienungsanleitung war für 8 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/10
Important: Read before use. • Importante: Leer antes de usar.
For additional benets:
or go to: register.intellinet-network.com/r/562034
PoE-Powered
6-Port Lite Smart
Managed PoE+
Switch with 4
GbE Ports / 2 GbE Uplinks and
PoE Passthrough
Instructions
Model 562034 (IPS-6GM02-60W)
Scan to
register your
product warranty
For specifications, go to intellinet-network.com. Register your product at register.
intellinet-network.com/r/562034 or scan the QR code on the cover.
Front Panel
This switch is equipped with six Gigabit ports; four are PoE-enabled and two are Gigabit
uplink ports. Each of the four PSE ports (Ports 1-4) can provide up to 30 watts (with total
capacity of up to 60W); non-PoE devices only receive data. The product is compliant with
802.3af and IEEE 802.3at standards and can be powered either by the included adapter or
via PoE. Cat5e/6/6a UTP/STP cables provide optimal performance; if a status LED doesn’t
indicate a link or activity, check the corresponding device for proper setup and operation.
LED Color Status Status Description
PWR Orange Off No power is supplied to the switch.
On Power is supplied via the AC adapter or the PD port.
Link/
Act Green
Off No network link is established.
On A network link has been established.
Flashing A network link has been established and data
packets are being sent and received.
PoE Orange
Off Port is not supplying power to a connected PoE device.
On Port is supplying power to a connected PoE device.
Flashing Abnormal power supply
Rear Panel
Chassis Ground Column
Wire the grounding terminal to an earth grounding object to
protect equipment from external electrical surges.
Power
Use the included power cord to connect the device to an AC outlet.
Confirm that the PWR LED on the front panel is lit.
2
Placement & Setup
Desktop
Prior to use, it is recommended that the switch be placed/positioned: with a minimum of 25 mm (approx.
1”) of clearance on the top and sides for adequate ventilation; away from sources of electrical noise:
radios, transmitters, broadband amplifiers, etc.; within 100 m (approx. 328’) of network devices it’s to be
connected to. Attach the rubber feet to the bottom of each corner of the switch to increase stability.
Wall Mounting
First, install screws (not included) into the wall at appropriate distances.
Then, hang the unit on the screws and slide it into place so it is secure.
Setup
The switch can be powered via PoE (95W) or AC power:
• Connect Port 6 (PoE In / PD) to a PoE injector or PoE switch;
• Plug the included power cable into an AC outlet.
= Ethernet Data
= PSE (power sourcing equipment) Power & Data
= PD (powered device) Power & Data
Basic Web-Based Browser Management
1 Open your Web browser.
2 Enter http:// and the IP address of the switch in the Address field.
The default management IP address is . 192.168.2.1
3 Press Enter to display the login screen. In the Username field, enter admin; in the
Password field, enter the on the bottom of the switch. Click .serial number OK
NVR
PoE In
PSE
PD
3


Produktspezifikationen

Marke: Intellinet
Kategorie: Nicht kategorisiert
Modell: 562034

Brauchst du Hilfe?

Wenn Sie Hilfe mit Intellinet 562034 benĂśtigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Nicht kategorisiert Intellinet

Bedienungsanleitung Nicht kategorisiert

Neueste Bedienungsanleitung fĂźr -Kategorien-