Intellinet 509220 Bedienungsanleitung


Lesen Sie kostenlos die đź“– deutsche Bedienungsanleitung fĂĽr Intellinet 509220 (16 Seiten) in der Kategorie Nicht kategorisiert. Dieser Bedienungsanleitung war fĂĽr 5 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/16
product warranty
or go to: register.intellinet-network.com/r/509220
Outdoor PoE-Powered 5-Port
2
This guide presents the basic steps to set up and operate this device.
Outdoor PoE-Powered 5-Port Gigabit Switch with PoE Passthrough / 4-Port PoE+ Extender
features one 10/100/1000Mbps PoE-In port and four 10/100/1000Mbps PoE-Out ports.
Rainproof ABS plastic shell for pole installation. Ideal for wireless and surveillance applications.
For the user manual and specifications, visit . intellinet-network.com
Register your product at register.intellinet-network.com/r/509220 or scan the QR code on the cover.
Placement
Prior to use, it is recommended that the switch be placed/positioned:
• on a surface that can support the weight of the switch (and
any other items that need to be considered);
• with a minimum of 25 mm (approx. 1”) of clearance on
the top and sides for adequate ventilation;
• away from sources of electrical noise: radios, transmitters, broadband amplifiers, etc.;
• within 100 m (approx. 328’) of network devices (RJ45) it’s to be connected to.
The back side has mounting brackets, which can be used for wall- and pole-mounting
LED
LED Status Operation
PWR On Power is supplied to the switch
Off No power is supplied to the switch
LINK/ACT
On A network link is established
Flashing Data packets are being sent or received
Off A network link is not established
PoE Out (1-4) On Port is supplying power to a connected PoE device.
Off Port is not supplying power to a connected PoE device.
PoE In (5) On Power is supplied to the switch
Off No power is supplied to the switch
English
Instructions
PoE
PoE IN
OUT
PWR
LINK
/ACT
4
5
3
2
1
3English
Connections
• Open the bottom cover to connect the ports.
Once connected, secure the cover to guarantee
IP65 waterproof and dustproof protection.
• All ports on the switch support Auto-MDI/MDI-X functionality,
so you can use straight or crossover UTP/STP cables to connect
the RJ45 ports to PCs, routers, hubs, other switches, etc.
• Cat5e/6/6a/8.x UTP/STP cables provide optimal performance; if a status LED doesn’t indicate
a link or activity, check the corresponding device for proper setup and operation.
• PSE (power sourcing equipment) ports (1-4) — compliant with IEEE 802.3af/at —
that you can connect to PoE devices such as VoIP phones and network cameras. Any
Ethernet-compatible non-PoE device can also be connected to these 4 ports.
• PD (powered device) port (5). When connected to a IEEE 802.3bt/at/af-
compliant PoE injector, midspan or PoE switch, this switch will draw power
from that device; the included power adapter does not need to be used.
This port can also be connected to any standard Ethernet port.
Power
If using this switch as a passthrough power source for PoE devices on Ports 1, 2,3 and
4, the PD port (5) on this switch can receive up to 90 watts of power from a connected
PoE injector or PoE switch — less if the connected PoE device isn’t capable of sending
that much power on one port. This switch (509220) will use 5 watts to power itself.
Chassis Ground Column
Located on the connection panel of the switch a grounding terminal connector is used to provide
proper grounding for your switch. It should be wired to an object that provides earth ground.
Instructions
5
134
2


Produktspezifikationen

Marke: Intellinet
Kategorie: Nicht kategorisiert
Modell: 509220

Brauchst du Hilfe?

Wenn Sie Hilfe mit Intellinet 509220 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Nicht kategorisiert Intellinet

Bedienungsanleitung Nicht kategorisiert

Neueste Bedienungsanleitung fĂĽr -Kategorien-