ILive IAHB64 Bedienungsanleitung

ILive Kopfhörer IAHB64

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für ILive IAHB64 (2 Seiten) in der Kategorie Kopfhörer. Dieser Bedienungsanleitung war für 21 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF
Seite 1/2
Features & Controls
FCC Warnings
Warning: Changes or modications to this unit not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment generates, uses, and can radiate radio
frequency energy and, if not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
• Consult the dealer or an experienced radio/TV technician for help.
Additional Warnings and Precautions
• To avoid hearing damage, make sure that the volume on your music player is turned down before
connecting your headphones. After placing headphones in/on your ears, gradually turn up the volume
until you reach a comfortable listening level.
• Lithium batteries, like all rechargeable batteries, are recyclable and should be recycled or disposed of
according to state and local guidelines. They should never be disposed of in normal household waste,
and they should never be incinerated, as they might explode. Contact your local government for
disposal or recycling practices in your area.
• WARNING: This product may contain chemicals known to the State of California to cause birth
defects, or other reproductive harm (California Prop 65). Wash hands after handling.
• This product meets and complies with all Federal regulations.
Headphone Adjustment
Power/Pair
Press and hold to turn the
unit On or O.
Press and hold for 4 sec.
to turn the unit on and
begin pairing.
Microphone
Line In
DC Power Input
Power/Pairing Indicator Light
Play/Pause/Volume
Press to play or pause the
current track.
Adjust to turn the volume
up or down.
Features
• Supports Bluetooth
• Wireless range: 33 feet
• Built-in microphone
• Micro-USB port for battery
recharge
• Aux in (3.5mm audio input)
• Adjustable headband
• On-ear controls
• DC battery power: built-in
rechargeable lithium ion battery
• Battery life:
approx. 8 hours at 100% volume
15 hours at 50% volume
Includes
• Micro-USB to USB cable
• 3.5mm audio cable
• Carry pouch
Bluetooth Wireless Headphones
User’s Guide for Model IAHB64 v1756-01
To download this User’s Guide in English, Spanish, or French, or to get answers to frequently asked questions, visit the
support section at: www.iLiveElectronics.com
Para descargar este Manual del Usuario en inglés, español y francés, o para obtener respuestas a preguntas frecuentes,
visite la sección de apoyo en: www.iLiveElectronics.com
Pour télécharger ce guide de l’utilisateur en anglais, espagnol ou français, ou pour obtenir des réponses à des questions
fréquemment posées, consultez la rubrique d’assistance sur: www.iLiveElectronics.com
For Warranty Information and the most up-to-date version of this User’s Guide, go to www.iLiveElectronics.com
Customer Service: | Email Support: | Email Parts: 1-888-999-4215 prodinfo@dpiinc.com partsinfo@dpiinc.com
Copyright © 2016 Digital Products International (DPI, Inc.) All other trademarks appearing herein are the property of their
respective owners. Specications are subject to change without notice.
Customer Support
Protect for Today
Sustain for Tomorrow
Made
Green
Using the Audio Input
Requires a 3.5mm audio cable (included).
1. Connect a 3.5mm audio cable to the on the unit and the Line In Input
audio output/headphone jack on an audio device.
2. Use the controls on the connected device to select and play your audio
through the headphones.
Bluetooth
Pairing a Bluetooth Device for the First Time
1. Simultaneously power on the unit and begin the pairing process by
pressing and holding the Power/Pair button for approximately 4 seconds.
The indicator will ash red and blue. When pairing, remain within 3 feet
of the unit.
2. Using the native controls on your Bluetooth device, select the in IAHB64
your Bluetooth settings to pair. If your device requests a password, enter the
default password . Refer to the user’s manual for your specic device 0 0 0 0
for instructions on pairing and connecting Bluetooth devices.
3. After initial pairing, the unit will stay paired unless unpaired manually by
the user or erased due to a reset of the device.
4. If your device should become unpaired or you nd it is unable to connect,
repeat the above steps.
Using the Speakerphone
1. When a call is received, a ringtone will sound through the headphones.
2. Press the Power/Pair button to accept the call or accept the call with the
native controls on the connected device.
3. The incoming call received through the device will now be heard through
the headphones.
4. To end the call, press the Power/Pair button or end the call using the
controls on the connected device.
Note: To re-dial the last dialed number, press the Power/Pair button twice.
Line In
LED Indicators
Playing Audio Wirelessly
1. To play or pause the selected track, use the native controls on the
connected Bluetooth Device or press the Play/Pause/Volume button.
2. Audio played through the connected Bluetooth device will now be heard
through the headphones.
STATUS INDICATOR
Power On Flashing blue light
Power O No light
Charging Solid red light
Charging Complete No light
Pairing Flashing red and blue lights
Charging the Battery
Requires a Micro-USB to USB cable (included).
1. Using a cable (included), connect to the USB port of Micro-USB to USB
a powered on computer or USB power adaptor (not included).

Produktspezifikationen

Marke: ILive
Kategorie: Kopfhörer
Modell: IAHB64

Brauchst du Hilfe?

Wenn Sie Hilfe mit ILive IAHB64 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten


Bedienungsanleitung Kopfhörer ILive

ILive

ILive IAHB64 Bedienungsanleitung

22 August 2024
ILive

ILive IAHRF79B Bedienungsanleitung

22 August 2024
ILive

ILive IAEB06 Bedienungsanleitung

22 August 2024
ILive

ILive IAHB16 Bedienungsanleitung

22 August 2024
ILive

ILive IAHM51 Bedienungsanleitung

14 Juni 2024
ILive

ILive IAEB6 Bedienungsanleitung

24 April 2024
ILive

ILive IAHB284B Bedienungsanleitung

13 November 2023

Bedienungsanleitung Kopfhörer

Neueste Bedienungsanleitung für -Kategorien-

AKG

AKG K920 AFC Bedienungsanleitung

16 Oktober 2024
GoGEN

GoGEN HBTM 41WR Bedienungsanleitung

16 Oktober 2024
Nedis

Nedis HPBT2102BK Bedienungsanleitung

15 Oktober 2024
AKG

AKG Y600NC Bedienungsanleitung

15 Oktober 2024
Vakoss

Vakoss MH954 Bedienungsanleitung

14 Oktober 2024
Skullcandy

Skullcandy Cassette Bedienungsanleitung

14 Oktober 2024
Audio-Technica

Audio-Technica ATH-ANC29 Bedienungsanleitung

14 Oktober 2024
Daewoo

Daewoo AVS1421 Bedienungsanleitung

14 Oktober 2024
Vakoss

Vakoss MH942 Bedienungsanleitung

14 Oktober 2024
Philips

Philips SHB7150 Bedienungsanleitung

13 Oktober 2024