IFi Audio GO pod Bedienungsanleitung


Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für IFi Audio GO pod (5 Seiten) in der Kategorie Kopfhörer. Dieser Bedienungsanleitung war für 7 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/5
Thank you for purchasing this GO series pod. The GO pod is an Wearable HD Bluetooth DAC/headphone amp.
1. GO pod status indicator
LED Status
Charging: Steady Red
Fully charged: Light o
Awaiting connection: Flashing Blue
Ready to pair: Alternately ash Red and Blue
Successfully paired: Light o
Factory Reset: Steady Blue ≥3s. Alternately ash Red and Green (only operated within Gaia APP
when in binaural working mode)
2. Touch control area
- Play/Pause/Answer the call (Single tap)
- Reject/hang up (Double tap)
- Skip forward (Double tap)
- Skip back (Triple tap)
- Volume Up (Hold right, used when in binaural working mode, not available in monaural working mode))
- Volume Down (Hold left, used when in binaural working mode, not available in monaural working mode))
- Wake up voice assistant (Single tap then hold)
- Bluetooth Pairing (Hold left and right together for 2s)
- Power Reset (Hold left or right for 12s, release when steady blue light is on*)
Tip: The reboot function can be used when the GO pod is abnormal or dead.
3. Microphone
Built-in mic for hands-free calls when paired with your smartphone.
Tip: To wake up your phone's voice assistant, Single tap then hold left or right for 2s the Touch control area (2).
3 3
1
2
1
2
4. 5V/1A USB-C battery charge input
For charging only. 5V/1A and above Type-C charger.
5. 5V/1.5A Qi wireless charging battery charging input
Use a 5V/1.5A and above Qi certied wireless charger.
6. Charging box LED for Battery Status
LED Status
4/4 > 75%
3/4 > 50%
2/4 > 25%
1/4 25%
*Battery LED will ash when it is charging and will go out when it is fully charged.
4
5
6
Bluetooth Pairing
When removed from the charging case, GO pod LED blinks blue as it automatically searches for a
previously paired device. If a stored device is not found, it then automatically enters pairing mode with
LED blinking blue and red.
To enter pairing mode manually, Press the left and right touch area together for 2s until LED ashes red /
blue.
The GO pod is able to store up to 8 paired Bluetooth devices. Manual reconnection may still be necessary.
Connecting to Bluetooth device
Turn on the phones Bluetooth function, and select GO pod in your Bluetooth list.
GO pod Auto-connecting
The GO pod switch on and connect to each other automatically when taken out of the charging case. And
the GO pod will ash blue lights to indicate that the GO pod are automatically interconnection to each
other. Once interconnection successfully, the GO pod L +R will alternately ash the red light and blue light.
Single-GO pod Mode
Removing the right or left GO pod from the charging case, it will automatically turn on, and select GO
pod (Left GO pod) or GO pod (Right GO pod) in the Bluetooth list to connect GO pod.
If the GO pod has not successfully connected to Bluetooth for more than 5 minutes, they will
automatically shut down.
When the GO pod is placed back in the charging case it automatically switches o and goes into charging,
the binaural hanging steady red light is always on until it is fully charged and then goes out.
Do not leave the left and right GO pod too far when you take out them from the charging case for pairing.
The recommended distance is no more than 15 CM.


Produktspezifikationen

Marke: IFi Audio
Kategorie: Kopfhörer
Modell: GO pod

Brauchst du Hilfe?

Wenn Sie Hilfe mit IFi Audio GO pod benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Kopfhörer IFi Audio

Bedienungsanleitung Kopfhörer

Neueste Bedienungsanleitung für -Kategorien-