First Alert FG250 Bedienungsanleitung
First Alert
Rookmelder
FG250
Lesen Sie kostenlos die đź“– deutsche Bedienungsanleitung fĂĽr First Alert FG250 (5 Seiten) in der Kategorie Rookmelder. Dieser Bedienungsanleitung war fĂĽr 6 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet
Seite 1/5
Models FG225
FG250
IMPORTANT! PLEASE READ
CAREFULLY AND SAVE.
This user’s manual contains important information
about your Smoke Alarm’s operation. If you are
installing this Smoke Alarm for use by others,
you must leave this manual—or a copy of it
—with the end user.
FIRE SAFETY TIPS
Follow safety rules and prevent hazardous situations: 1) Use smoking
materials properly.Never smoke in bed. 2) Keep matches or lighters away
from children; 3) Store flammable materials in proper containers; 4) Keep
electrical appliances in good condition and don’t overload electrical
circuits; 5) Keep stoves, barbecue grills, fireplaces and chimneys grease-
and debris-free; 6) Never leave anything cooking on the stove unattended;
7) Keep portable heaters and open flames, like candles, away from
flammable materials; 8) Don’tlet rubbish accumulate.
Keep alarms clean, and test them weekly. Replace alarms immediately if
they are not working properly. Smoke Alarms that do not work cannot alert
you to a fire. Keep at least one working fire extinguisher on every floor, and
an additional one in the kitchen. Have fire escape ladders or other reliable
means of escape from an upper floor in case stairs areblocked.
INTRODUCTION
Thank you for choosing BRK Brands, Inc. for your Smoke Alarm needs.
You have purchased a state-of-the-art Smoke Alarm designed to provide
you with early warning of a fire. Key features include:
Silence Feature (FG250 Only) -Silences nuisance alarms.
Hinged Cover Design -Allows for fast, easy installation and battery
replacement.
Lighted Power and Alarm Indicator -LED reassures that the battery is
properly connected and is supplying power. Provides a visual indication
of what unit initiated the alarm.
Tamper Resistant Locking Pin -Locks alarm cover to prevent removal
of battery.Perfect for apartment, dormitory or hotel applications.
RV Approved -Approved for use in Recreational Vehicles.
Test/Silence Button -One touch button combines both features.
Low Battery Indicator -Beeping signal warns when battery needs
replacing.
TABLE OF CONTENTS
Introduction ...............................................1
Fire Safety Tips . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1
Before You Install This Smoke Alarm ..........................2
How ToInstall This Smoke Alarm .............................2
Weekly Testing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3
Regular Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3
If This Smoke AlarmSounds . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3
What To Do In Case Of Fire . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3
If You Suspect A Problem . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3
Recommended Locations For Smoke Alarms . . . . . . . . . . . . . . . . .3-4
Locations To Avoid For Smoke Alarms . . . . . . . . . . . . . . . . . . . . . . . . .4
About Smoke Alarms . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4
Special Compliance Considerations . . . . . . . . . . . . . . . . . . . . . . . . . . .4
Limitations Of Smoke Alarms . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5
Limited Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5
©2008 BRK Brands, Inc. All rights reserved.
Distributed by BRK Brands, Inc.
3901 Liberty Street Road, Aurora, IL 60504-8122
Consumer Affairs: (800) 323-9005
www.brkelectronics.com • www.firstalert.com
1
M08-0199-002 A08/08 Printed in Mexico
All BRK®Smoke Alarms conform to regulatory requirements,
including UL217 and are designed to detect particles of combustion.
Smoke particles of varying number and size are produced in all fires.
Ionization technology is generally moresensitive than photoelectric
technology at detecting small particles, which tend to be produced
in greater amounts by flaming fires, which consume combustible
materials rapidly and spread quickly. Sources of these fires may include
paper burning in a wastebasket, or a grease fire in the kitchen.
Photoelectric technology is generally more sensitive than ionization
technology at detecting large particles, which tend to be produced
in greater amounts by smoldering fires, which may smolder for
hours before bursting into flame. Sources of these fires may include
cigarettes burning in couches or bedding.
For maximum protection, use both types of Smoke Alarms on each
level and in every bedroom of your home.
BATTERY POWERED
SMOKE ALARM
USER’S MANUAL
Model FG225
Model FG250
LISTED TO
UL 217
STANDARD
HOW TO INSTALL THIS SMOKE ALARM
THE PARTS OF THIS SMOKE ALARM FOLLOW THESE SIMPLE STEPS!
1. “OPEN HERE” tab
2. Cover hinge
3. Test button
4. Power/alarm indicator
Tools you will need:
•Pencil •Drill with 3/16” (5 mm) drill bit
•Hammer • Standard flathead screwdriver
1. Hold base firmly and pull up on cover tab marked “OPEN HERE.”
This will open the hinged cover.The cover may unsnap from the base
if it's opened too far.This will not damage the unit—the cover hinge
snaps back into place easily.
2. Hold the Smoke Alarm base against the ceiling (or wall) and make a
mark at the center of each of the mounting slots with a pencil.
3. Put the unit whereit won’tget covered with dust when you drill the
mounting holes.
4. Using a 3/16” (5 mm) drill bit, drill a hole through each pencil mark.
5. Insert the plastic screw anchors (in the plastic bag with screws) into
the holes. Tap the screw anchors gently with a hammer,if necessary,
until they are flush with the ceiling or wall.
6. Tighten the screws (provided) into the screw anchors, then loosen
them two turns.
7. Fit the Smoke Alarm over the screw heads as shown. Close cover.
8. If the Smoke Alarm cover does not line up the way you want it, rotate
the base and re-tighten the screws.
9. Activate the battery. With the cover open, remove and reinstall the
battery so the terminals on the battery match the terminals on the
Smoke Alarm. Match “+” to “+” and “-” to “-.” Push the battery in
until it snaps in securely and cannot be shaken loose.
If the battery is not snapped in completely, the unit cannot receive
battery power. The Smoke Alarm may beep briefly when you install
the battery—this is normal.
Once the battery is installed, the red power indicator light (behind the
test button) will flash once a minute to show you the Smoke Alarm is
working.
10. Close the cover all the way.
11. Test the Smoke Alarm. See “Weekly Testing.”
Tolock/unlock the cover to the base:
1. Using needle-nose pliers or a utility knife, detach locking
pin from back of alarm base.
2. Insert locking pin into the slot located on the front of the
alarm as shown in the diagram.
3. Remove pin to unlock and replace battery.
Cover Open
1. “Open Here”
2. Test button or Test/Silence
button (FG250 only)
3. Smoke alarm base
4. “No Battery” tab
5. Mounting slots
6. Install 9V battery here
7. Locking pin slot
Locking Pin
Insert Locking Pin
LOCKING FEATURE
This unit is designed to be
mounted on the ceiling, or
on the wall if necessary.
2
BEFORE YOU INSTALL THIS SMOKE ALARM
IMPORTANT! Read “Recommended Locations for Smoke Alarms”
and “Locations to Avoid for Smoke Alarms” before beginning. This unit
monitors the air, and when smoke reaches its sensing chamber, it alarms.
Itcan give you more time to escape before fire spreads. This unit can
ONLY give an early warning of developing fires if it is installed, maintained
and located where smoke can reach it, and where all residents can hear
it, as described in this manual. This unit will not sense gas, heat, or
flame. It cannot prevent or extinguish fires.
Understand The Different Type of Smoke Alarms
Battery powered or electrical? Different Smoke Alarms provide
different types of protection. See “About Smoke Alarms” for details.
Know Where To Install Your Smoke Alarms
Fire Safety Professionals recommend at least one Smoke Alarm on every
level of your home, in every bedroom, and in every bedroom hallway or
separate sleeping area. See “Recommended Locations For Smoke
Alarms” and “Locations To Avoid For Smoke Alarms” for details.
Know What Smoke Alarms Can and Can’t Do
ASmoke Alarm can help alert you to fire, giving you precious time to
escape. It can only sound an alarm once smoke reaches the sensor.
See “Limitations of Smoke Alarms” for details.
Check Your Local Building Codes
This Smoke Alarm is designed to be used in a typical single-family
home. It alone will not meet requirements for boarding houses,
apartment buildings, hotels or motels. See “Special Compliance
Considerations” for details.
• This unit will not alert hearing impaired residents. It is recom-
mended that you install special units which use devices like
flashing strobe lights to alert hearing impaired residents.
•Do not connect this unit to any other alarm or auxiliary device.
It is a single-station unit that cannot be linked to other devices.
Connecting anything else to this unit may prevent it from working
properly.
•Unit will not operate without battery power. The Smoke Alarm
cannot work until you install the battery in the correct position
(Match “+” to “+” and “-” to “-”).
•This Smoke Alarm has a battery guard which prevents it from
closing unless a battery is installed. This warns you the unit will
not operate without a battery.
• Do not install this unit over an electrical junction box. Air currents
around junction boxes can prevent smoke from reaching the
sensing chambers and prevent the unit from alarming. Only AC
powered units are intended for installation over junction boxes.
• Do not stand too close to the unit when the alarm is sounding.
Itis loud to wake you in an emergency. Exposure to the horn at
close range may harm your hearing.
•
Do not paint over the unit. Paint may clog the openings to the
sensing chambers and prevent the unit from operating properly.
3
WEEKLY TESTING
•NEVER use an open flame of any kind to test this unit. You
might accidentally damage or set fire to the unit or to your home.
The built-in test switch accurately tests the unit’s operation as
required by Underwriters Laboratories, Inc. (UL).
•If the Alarm ever fails to test properly, replace it immediately.
Products under warranty may be returned to the manufacturer
for replacement. See “Limited Warranty” for details.
DONOT stand close to the alarm when the horn is sounding.
Exposure at close range may be harmful to your hearing. When
testing, step away when horn starts sounding.
Itis important to test this unit every week to make sure it is working
properly. Using the test button is the recommended way to test this
Smoke Alarm. Press and hold the test button on the cover of the unit until
the alarm sounds (the unit may continue to alarm for a few seconds after
you release the button). If it does not alarm, make sure the unit is receiving
power and test it again. If it still does not alarm, replace it immediately.
During testing you will hear a loud, repeating horn pattern: 3 beeps, pause,
3beeps, pause; and the Red LED will flash rapidly.
IF THIS SMOKE ALARM SOUNDS
RESPONDING TO AN ALARM
During an alarm, you will hear a loud, repeating horn pattern:
3beeps, pause, 3 beeps, pause; and the Red LED will flash rapidly.
•If the unit alarms and you are not testing the unit, it is warning you
of a potentially dangerous situation that requires your immediate
attention. NEVER ignore any alarm. Ignoring the alarm may result
in injury or death.
• Never remove the batteries from a battery operated Smoke Alarm
to stop an unwanted alarm (caused by cooking smoke, etc.).
Removing batteries disables the alarmso it cannot sense smoke,
and removes your protection. Instead open a window or fan the
smoke away from the unit. The alarm will reset automatically.
• If the unit alarms get everyone out of the house immediately.
REGULAR MAINTENANCE
This unit has been designed to be as maintenance free as possible, but
there are a few simple things you must do to keep it working properly.
Use only the replacement batteries listed below. The unit may not
operate properly with other batteries. Never use rechargeable
batteries since they may not provide a constant charge.
• Test it at least once a week.
•Clean the Smoke Alarm at least once a month; gently vacuum the
outside of the Smoke Alarm using your household vacuum’ssoft
brush attachment. Test the Smoke Alarm. Never use water, cleaners
or solvents since they may damage the unit.
• If the Smoke Alarm becomes contaminated by excessive dirt, dust
and/or grime, and cannot be cleaned to avoid unwanted alarms,
replace the unit immediately.
• Relocate the unit if it sounds frequent unwanted alarms. See
“Locations to Avoid for Smoke Alarms” for details.
•When the battery becomes weak, the Smoke Alarm unit will “chirp”
about once a minute (the low battery warning). This low battery warning
should last 7 days, but you should replace the battery immediately to
continue your protection. Note: If locking pin is engaged see "Locking
Feature" section for unlocking instructions.
Choosing a replacement battery:
Your Smoke Alarm requires one standard 9V battery. The following
batteries areacceptable as replacements: Duracell #MN1604, (Ultra)
#MX1604; Eveready (Energizer) #522. You may also use a Lithium battery
like the Ultralife U9VL-J for longer service life between battery changes.
These batteries are available at many local retail stores.
Actual service life depends on the Smoke Alarm and the environment
in which it is installed. All the batteries specified above are acceptable
replacement batteries for this unit. Regardless of the manufacturer’s
suggested battery life, you MUST replace the battery immediately once
the unit starts “chirping” (the “low battery warning”).
RECOMMENDED LOCATIONS FOR SMOKE ALARMS
Installing Smoke Alarms in Single-Family Residences
The National Fire Protection Association (NFPA), recommends one Smoke
Alarm on every floor, in every sleeping area, and in every bedroom. In new
construction, the Smoke Alarms must be AC poweredand interconnected.
See “Agency Placement Recommendations” for details. For additional
coverage, it is recommended that you install a Smoke Alarm in all rooms,
halls, storage areas, finished attics, and basements, wheretemperatures
normally remain between 40Ëš F (4ËšC) and 100Ëš F (38ËšC). Make sure no door
or other obstruction could keep smoke from reaching the Smoke Alarms.
More specifically, install Smoke Alarms:
• On every level of your home, including finished attics and basements.
• Inside every bedroom, especially if people sleep with the door partly
or completely closed.
• In the hall near every sleeping area. If your home has multiple
sleeping areas, install a unit in each. If a hall is more than 40 feet
long (12 meters), install a unit at each end.
• At the top of the first-to-second floor stairway,and at bottom of the
basement stairway.
Specific requirements for Smoke Alarm installation vary from state to
state and from region to region. Check with your local Fire Department
for current requirements in your area. It is recommended AC or AC/DC
units be interconnected for added protection.
INSTALLING SMOKE ALARMS IN MOBILE HOMES & RVS
For minimum security install one Smoke Alarm as close to each sleeping
area as possible. For moresecurity,put one unit in each room. Many
older mobile homes (especially those built before 1978) have little or no
insulation. If your mobile home is not well insulated, or if you are unsure
of the amount of insulation, it is important to install units on inside walls
only.Smoke Alarms should be installed wheretemperatures normally
remain between 40Ëš F (4Ëš C) and 100Ëš F (38Ëš C). WARNING: Test units
used in RVs after the vehicle has been in storage, before every trip,
and once a week while in use. Failure to test units used in RVs as
described may remove your protection.
IF YOU SUSPECT A PROBLEM
Smoke Alarms may not operate properly because of dead, missing or
weak batteries, a build-up of dirt, dust or grease on the Smoke Alarm
cover, or installation in an improper location. Clean the Smoke Alarm as
described in “Regular Maintenance,” and install a fresh battery, then test
the Smoke Alarm again. If it fails to test properly when you use the test
button, or if the problem persists, replace the Smoke Alarm immediately.
• If you hear a “chirp” once a minute, replace the battery.
•If you experience frequent non-emergency alarms (like those
caused by cooking smoke), try relocating the Smoke Alarm.
•If the alarm sounds when no smoke is visible, try cleaning or
relocating the Smoke Alarm. The cover may be dirty.
•If the alarm does not sound during testing, try installing a new
battery, and make sure it is snapped in securely.
Ifthe Smoke Alarm is still not operating properly, and it is still under
warranty, please see “How to Obtain Warranty Service” below.
Donot try fixing the alarm yourself – this will void your warranty!
WHAT TO DO IN CASE OF FIRE
• Don’t panic; stay calm. Follow your family escape plan.
• Get out of the house as quickly as possible. Don’t stop to
get dressed or collect anything.
• Feel doors with the back of your hand before opening them.
If a door is cool, open it slowly. Don’t open a hot door. Keep doors
and windows closed, unless you must escape through them.
• Cover your nose and mouth with a cloth (preferably damp).
Take short, shallow breaths. Continued...
WHAT TO DO IN CASE OF FIRE, Continued
•Meet at your planned meeting place outside your home,
and do a head count to make sure everybody got out safely.
• Call the Fire Department as soon as possible from outside.
Give your address, then your name.
• Never go back inside a burning building for any reason.
• Contact your Fire Department for ideas on making your home safer.
Alarms have various limitations. See "Limitations of Smoke Alarms"
for details.
Produktspezifikationen
| Marke: | First Alert |
| Kategorie: | Rookmelder |
| Modell: | FG250 |
Brauchst du Hilfe?
Wenn Sie Hilfe mit First Alert FG250 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten
Bedienungsanleitung Rookmelder First Alert
13 September 2024
5 September 2024
4 September 2024
4 September 2024
4 September 2024
4 September 2024
7 August 2024
7 August 2024
2 August 2024
1 August 2024
Bedienungsanleitung Rookmelder
- Rookmelder Hama
- Rookmelder Nedis
- Rookmelder Trust
- Rookmelder Brennenstuhl
- Rookmelder Clas Ohlson
- Rookmelder Eminent
- Rookmelder Alecto
- Rookmelder EMOS
- Rookmelder Gira
- Rookmelder König
- Rookmelder MarQuant
- Rookmelder Vivanco
- Rookmelder Abus
- Rookmelder Elro
- Rookmelder Olympia
- Rookmelder Smartwares
- Rookmelder Yale
- Rookmelder Ferguson
- Rookmelder Nexa
- Rookmelder GEV
- Rookmelder B/R/K
- Rookmelder Netatmo
- Rookmelder Hager
- Rookmelder JUNG
- Rookmelder Ei Electronics
- Rookmelder FireAngel
- Rookmelder Kidde
- Rookmelder Kogan
- Rookmelder M-e
- Rookmelder Stabo
- Rookmelder HQ
- Rookmelder Busch-Jaeger
- Rookmelder Swann
- Rookmelder Sygonix
- Rookmelder Chuango
- Rookmelder Pyrexx
- Rookmelder EQ3
- Rookmelder Elgato
- Rookmelder ESYLUX
- Rookmelder Fito
- Rookmelder Interlogix
- Rookmelder Mercury
- Rookmelder Satel
- Rookmelder X-Sense
- Rookmelder Dahua Technology
- Rookmelder Inovonics
- Rookmelder Heatit
- Rookmelder H-Tronic
- Rookmelder FireX
- Rookmelder System Sensor
- Rookmelder Chacon
- Rookmelder Fibaro
- Rookmelder ORNO
- Rookmelder WisuAlarm
- Rookmelder Cavius
- Rookmelder DSC
- Rookmelder Cordes
- Rookmelder Calex
- Rookmelder Mobeye
- Rookmelder Qolsys
- Rookmelder Ajax
- Rookmelder AngelEye
- Rookmelder FirstAlert
- Rookmelder FireHawk
- Rookmelder ETiger
- Rookmelder TEF
- Rookmelder Pristine
- Rookmelder Jemay
- Rookmelder Mircom
- Rookmelder Egardia
- Rookmelder Frient
- Rookmelder SAVS
Neueste Bedienungsanleitung fĂĽr -Kategorien-
17 September 2024
16 September 2024
16 September 2024
14 September 2024
14 September 2024
12 September 2024
10 September 2024
6 September 2024
6 September 2024
6 September 2024