Fellowes Pulsar-E 300 Bedienungsanleitung

Fellowes Megaphon Pulsar-E 300

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Fellowes Pulsar-E 300 (54 Seiten) in der Kategorie Megaphon. Dieser Bedienungsanleitung war für 12 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF

Seite 1/54

Small Ofﬁce Comb Binder

Please read these instructions before use.

Do not discard: keep for future reference.

Lire ces instructions avant utilisation.

Ne pas jeter : conserver pour référence ultérieure.

Lea estas instrucciones antes de usarlo.

No las deseche: guárdelas para

tenerlas como referencia.

Diese Anleitungen vor Gebrauch genau

durchlesen.

Bitte nicht entsorgen: zur späteren

Bezugnahme aufheben

Prima dell’uso, si raccomanda di leggere

questo manuale di istruzioni. Conservare il

manuale per consultarlo secondo le necessità.

Dese instructies voor gebruik lezen.Niet

weggooien, maar bewaren om

later te kunnen raadplegen.

Läs dessa anvisningar innan du använder

apparaten.

Släng inte bort, behåll för framtida bruk.

Læs venligst denne vejledning før anvendelse.

Bør ikke bortskaﬀes. Behold for

fremtidig henvisning.

Lue nämä ohjeet ennen käyttöä.

Älä hävitä: säilytä myöhempää käyttöä varten.

Vennligst les nøye igjennom denne

bruksanvisningen før bruk.

Ikke kast den: Ta vare på den for senere referanse.

Przed użyciem proszę zapoznać się z tą

instrukcją.

Nie wyrzucać - zachować jako źródło

informacji na przyszłość

Перед началом эксплуатации обязательно

прочтите данную инструкцию.

Не выбрасывайте данную

инструкцию: сохраните ее для

последующего использования.

Παρακαλείσθε να διαβάσετε αυτές τις οδηγίες

πριν χρησιμοποιήσετε το προϊόν.

Μην τις απορρίψετε: κρατήστε

τις για μελλοντική αναφορ

Kullanmadan önce lütfen bu talimatları okuyun.

Atmayın: ileride başvurmak üzere saklayın.

Před použitím si pročtěte tyto pokyny.

Nelikvidujte: uschovejte pro budoucí použití.

Pred použitím si prečítajte tieto pokyny.

Nezahadzujte: odložte pre budúce použitie.

Kérjük, hogy használat előtt olvassa el az

utasításokat!

Az utasításokat ne dobja ki; tartsa meg

referenciaanyagként való jövőbeni használatra.

Leia estas instruções antes da utilização.

Não as deite fora: conserve-

as para consulta futura.

Pročitajte ove upute prije upotrebe.

Nemojte baciti: sačuvajte za buduću upotrebu.

Molimo da ova uputstva pročitate pre upotrebe.

Nemojte ih baciti: sačuvajte ih za ubuduće.

Моля, прочетете тези инструкции преди

употреба.

Не изхвърляйте: пазете за справки в бъдеще.

Vă rugăm să citiţi aceste instrucţiuni înainte de

utilizare.

Nu aruncaţi: păstraţi pentru o

consultare ulterioară.

CUSTOMER SERVICE & SUPPORT

www.fellowes.com

Europe Freephone: 00800-1810-1810

Benelux: +31-(0)-13-458-0580

Deutschland: +49 (0)511 545489-0

France: +33 (0) 1 78 64 91 00

Italia: +39-071-730041

Polska: +48 (22) 205-21-10

España/Portugal: +34-91-748-05-01

United Kingdom: +44 (0) 1302 836836

Declaration of Conformity

Fellowes, Inc.

Unit 2 Ontario Drive, New Rossington, Doncaster, DN11 0BF, England declares that the product model Pulsar E 300 conforms

with the requirements of the Restriction of Hazardous Substances Directive (2011/65/EU), the Low Voltage Directive (2014/35/

EU), the Electromagnetic Compatibility Directive (2014/30/EU), the WEEE directive (2012/19/EU), and below harmonized

European EN Standards.

Safety: EN60950-1: 2006/A2:2013

EMC Standard: EN55014-1:2006+A1:2009+A2:2011

EN55014-2:1997+A1:2001+ A2:2008

EN61000-3-2:2014

EN61000-3-3:2013

Year Affixed: 16

Itasca, Illinois, USA

July 1, 2016

John Fellowes

1789 Norwood Avenue, Itasca, Illinois 60143 • 1-800-955-0959 • www.fellowes.com

B r a n d s

Pulsar E_300_408724_RevC_24L_103116.indd 108-1 10/31/16 3:43 PM

2 3

Waste tray

Comb storage and

Document measure

ENGLISH

CAPABILITIES

IMPORTANT SAFETY INSTRUCTIONS — Read Before Using!

When punching;

• always ensure the machine is on a stable surface

• test punch scrap sheets and set the machine before punching

nal documents

• remove staples and other metal articles prior to punching

• never exceed the machines quoted performance

• Keep the machine away from heat and water sources.

• Never attempt to open or otherwise repair the machine.

• Plug the machine into an easily accessible socket.

• Turn off the machine after each use

• Unplug the machine when not in use for an extended period.

Note – this machine features a thermal cut-out device which activates when the machine is

overheated during use. It will automatically reset when the machine is safe to operate.

Punching Capacity

Paper sheets

80g / 20lb 20 sheet

Transparent covers

100-200 micron / 4-8 mil 3 sheet

200+ micron / 8+ mil 2 sheet

Other standard covers

160-270g / 40-60 lb 3 sheet

270+g / 60+ lb 2 sheet

Voltage: 220-240V AC 50/60Hz

Current: 1.5A

Duty Cycle: 30 Minutes On / 30 Minutes Off

Please keep for future reference

Comb

opening lever

Document

support (lid)

Window

Adjustable

edge guide

Paper entry

Punch Button

Power on neon

Overload neon

BINDING CAPACITY

Max comb size 38mm/1.5”

Max document (80g / 20lb) 300 sheet

TECHNICAL DATA

Paper dimensions A4

Punching slots 21

Slot pitch 14.28mm / 9/16”

Adjustable edge guide yes

Waste tray capacity 1500 sheet

Motor wattage 345

Net weight 9.5 kg / 20.9 lb

Dimensions (HxWxD) 130 x 430 x 390mm / 5.1” x 16.93” x 15.4”

Comb storage and

Document measure

Waste tray

A5A4

COMB DIAMETER & DOCUMENT SIZES

SET UP

765

21 3 4

1. Ensure the machine is on a

stable surface.

2. Check waste tray is empty

and correctly ﬁtted.

3. The machine is supplied with

loose power leads. Select the

correct lead for the appropriate

power supply.

4. Fit the lead to the machine

(the socket is at the rear of the

machine).

5. Plug the machine into an easily

accessible mains socket. Switch the

mains supply on.

6. Switch the machine on (located

at the rear of the machine)

7. Lift the lid. Check the green power

neon is on. Ensure the comb-opening

lever is pushed backwards.

mm inch number of pages

6mm 1/4” 2-20

8mm 5/16” 21-40

10mm 3/8” 41-55

12mm 1/2” 56-90

16mm 5/8” 91-120

18mm 1 1/16” 121-150

22mm 7/8” 151-180

25mm 1” 181-200

32mm 1 1/4” 201-240

38mm 1 1/2” 241-340

Need Help?

Customer Service…. www.fellowes.com

Let our experts help you with a solution.

Always call Fellowes before contacting your

place of purchase.

Pulsar E_300_408724_RevC_24L_103116.indd 3 10/31/16 3:43 PM

4 5

ENGLISH

STEPS TO BIND

21 3 4

3. Load punched sheets directly

onto the opened comb. Starting

with the front of the document.

4. When all punched sheets are

loaded onto the comb, push the

comb lever backwards to close

the comb and remove the bound

document.

BEFORE YOU BIND

21 3

1. Check the green power neon

is on.

2. Select the correct comb

diameter using the comb

storage tray.

3. Insert the plastic comb into the

opening mechanism.

4. Pull comb-opening lever forward

to open the comb.

5. Test punch scrap sheets to check

edge guide setting.

Back

Cover

Front

Cover

Max 20

(80gsm)

(20 lb)

WARRANTY

Fellowes warrants all parts of the binder to be free of defects in material and workmanship for

2 years from the date of purchase by the original consumer. If any part is found to be defective

during warranty period, your sole and exclusive remedy will be repair or replacement, at

Fellowes’ option and expense, of the defective part. This warranty does not apply in cases of

abuse, mishandling or unauthorised repair. Any implied warranty, including that of merchant-

ability or tness for particular purpose, is hereby limited in duration to the appropriate warranty

period set forth above. In no event shall Fellowes be liable for any consequential damages

attributable to this product. This warranty gives you specic legal rights. You may have other

legal rights that vary from this warranty. The duration, terms and conditions of this warranty are

valid worldwide, except where different limitations, restrictions or conditions may be required by

local law. For more details or to obtain services under this warranty, please contact Fellowes or

your dealer.

CORRECTING A BOUND DOCUMENT

Additional sheets may be include or removed at any time by opening and then closing the comb as previously described.

REMOVAL OF WASTE CLIPPINGS

The waste tray is located under the machine and is accessed from the right side. For best results empty the tray regularly.

STORAGE

Switch off the machine. Lower the lid. The Pulsar-E comb binder is designed to be stored horizontally on the desk.

TROUBLESHOOTING

Problem

No Green power neon

Red standby neon

Punched holes are not central

Machine will not punch

Punch holes are not parallel to edge.

Waste tray leaks

Partial holes

Damaged hole edges

Waste tray leaks

Cause

Machine is not switched on

Machine is overloaded when punching

Edge guide not set

Blockage

Debris is stuck below dies.

Waste tray is not correctly inserted or ‘burst feature’ has activated

Sheets not correctly aligned to punch pattern.

Possibly overloading the machine

Waste tray is not correctly inserted or ‘burst feature’ has activated

Solution

Switch on machine at rear next to plug inlet and at the socket.

Press the punch button. The machine will withdraw the punches and re-set

itself. Continue this process until the punch cycle is complete

Adjust edge guide to correct paper or cover size.

Check waste tray is empty. Check for blockage to paper entry.

Take stiff cardboard and slide into the paper entry. Move the cardboard

sideways to release any stray clippings into the waste tray.

Check waste tray is empty and ‘burst feature’ is closed.

Adjust edge guide and test punch scrap sheets until correct

Punch plastic covers with paper sheets. Reduce number of sheets being

punched.

Check waste tray is empty and ‘burst feature’ is closed.

Australia Residents Only:

Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for a major failure and for compensation for any other

reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure.

The benets under Fellowes’ Warranty are in addition to other rights and remedies under a law in relation to the machine.

1. Ensure edge guide is set to the

proper document size. Punch front

and back covers ﬁrst.

2. Punch sheets in small batches

that do not overload the machine

or the user. Adjust edge guide, if

necessary.

Pulsar E_300_408724_RevC_24L_103116.indd 5 10/31/16 3:43 PM