Elite Screens Q100V Bedienungsanleitung
Elite Screens
Projectiescherm
Q100V
Lesen Sie kostenlos die đź“– deutsche Bedienungsanleitung fĂĽr Elite Screens Q100V (10 Seiten) in der Kategorie Projectiescherm. Dieser Bedienungsanleitung war fĂĽr 4 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet
Seite 1/10
Rev043010-JA
www.elitescreenscom info@elitescreens.com
QuickStand Series
Portable Frame-Folding Projection Screen
User s Guide ’
Rev043010-JA
www.elitescreenscom info@elitescreens.com
Setup Procedure
The frame and supports are made of 1 3/8” aluminum tubing with an anodized finish. Please follow the
instructions in this package. With proper care, your QuickStand screen will provide many years of reliable
service.
fig 2
Top
fig 1
fig 3
Lock down the corners
Snap latch
Snap latch
Top
Two Section Frame
(For presentation screens that are less than 120” in diagonal
measurement)
1. Take the frame out of the case and remove its wrappings.
Unfold the main joints as shown in (fig 1).
2. Once the main joints are unfolded, make sure that the snap
latches “click” into the locked position. The frame should now
be fully elongated as in (fig2). *Note: The snap latches will
automatically lock when the joint is straightened. Press the
snap latch button in order to release the lock.
3. While holding the bottom of the frame in place, lift the top of
the frame to unfold the sides which will cause the snap latches
lock when fully extended. Secure the corner braces into the
locked position. The screen frame should now be fully opened
as in (fig 3).
Rev043010-JA
www.elitescreenscom info@elitescreens.com
Three Section Frame
(For large presentation screens that are 120” or more in diagonal
measurement)
1. Take the frame out of the case and remove its
wrappings. Unfold the main joints making sure that
both the end and middle spans are in prefect alignment
as shown in (fig 4).
2. Make sure that the snap latches have locked the joints in
the frame so that it is at its full horizontal extension as
shown in (fig 5)
3. While holding the bottom of the frame in place, lift the
top of the frame to unfold the sides which will cause the
snap latches lock when fully extended. Secure the
corner braces into the locked position. The screen frame
should now be fully opened as in (fig 6).
fig 6
Lock down the corners
Snap latch
Snap latch
Top
fig 4
Produktspezifikationen
Marke: | Elite Screens |
Kategorie: | Projectiescherm |
Modell: | Q100V |
Brauchst du Hilfe?
Wenn Sie Hilfe mit Elite Screens Q100V benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten
Bedienungsanleitung Projectiescherm Elite Screens
23 August 2024
23 August 2024
23 August 2024
23 August 2024
23 August 2024
23 August 2024
23 August 2024
23 August 2024
23 August 2024
23 August 2024
Bedienungsanleitung Projectiescherm
- Projectiescherm Da-Lite
- Projectiescherm Pyle
- Projectiescherm Optoma
- Projectiescherm Kodak
- Projectiescherm NEC
- Projectiescherm Celexon
- Projectiescherm AV:link
- Projectiescherm Draper
- Projectiescherm Duronic
- Projectiescherm GPX
- Projectiescherm Luxburg
- Projectiescherm EluneVision
- Projectiescherm Stewart
- Projectiescherm Lumene
- Projectiescherm Avers
- Projectiescherm Elite ProAV
- Projectiescherm KHOMO GEAR
- Projectiescherm EPV
Neueste Bedienungsanleitung fĂĽr -Kategorien-
29 September 2024
27 September 2024
20 September 2024
11 September 2024
7 September 2024
6 September 2024
6 September 2024
5 September 2024
5 September 2024
4 September 2024