Da-Lite Lace And Grommet 91555 Bedienungsanleitung

Da-Lite Nicht kategorisiert Lace And Grommet 91555

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Da-Lite Lace And Grommet 91555 (8 Seiten) in der Kategorie Nicht kategorisiert. Dieser Bedienungsanleitung war für 4 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/8
INSTRUCTION BOOK FOR
Lace And Grommet
Theater-Type Screens
2
Da-Lite Lace and Grommet screens are custom made to meet
the requirements for large surface installation of a relatively
permanent nature. Great care is taken in the production of these
screens to assure extreme serviceability and excellence of
picture reproduction. Maximum overall size is based on
fabric type.
The Lace and Grommet screen may be ordered in the fabrics
listed below – all of which are lame retardant and mildew
resistant. Trimmed with a strong 21/2" webbing and grommets
spaced uniformly every 6 inches. Lacing cord, included at a
slight extra charge, is laced through grommets and fastened to
hooks on frame. . . providing a completely wrinkle-free surface.
No frames are furnished, but suggestions for their construction
are provided on page 3.
Lace and Grommet style screens are not recommended unless
the stage has a ly loft for safe storage of the screen when
it is not in use.
Screens are priced per square foot on overall screen sizes, which
are 5" larger each way than picture area. When ordering Lace
and Grommet custom made screens, please give the following
dimensions:
1. Overall size, including black webbing.
2. Net picture area, excluding black webbing.
Approximate shipping weight, 1/2 lb. per square foot.
Large projection screens will have one or more vertical seams.
Choose from these famous surfaces:
Pre-Installation
Manufacturer's Precaution
Suggested Methods Of Installation
Each Da-lite Screen is carefully inspected, wrapped and packed
in a manner that insures delivery to destination in irst class
condition. Careless handling of screens during installation can
result in screen surface being wrinkled, torn or damaged.
Da-Lite Screen Company does not assume responsibility
for such damage.
Conditions in theaters vary so greatly that no set of instructions
would be complete for each theater. The following suggestions,
regarding the installation, when supplemented with proper care
and good judgment in meeting local conditions will result in a
rapid and satisfactory installation.
Installing Screen to the frame: First, and most important, is to
handle the screen in a manner to prevent its being wrinkled
during installation.
Safest method is to lay the frame lat on a clean loor and unroll
the screen inside the frame. Tie it in at all four corners to ensure
centering in the frame. Then lacing should be installed around all
four sides. Do not attempt to draw lacing tight until after the
frame is raised to a vertical position.
When necessary to install the screen to a frame already erected,
and one that cannot be taken down, it is necessary to stand the
rolled screen on end in front of the frame and tie it at frequent
intervals to the top of the frame as it is unrolled.
Before starting the actual lacing, we recommend tying the screen
to all four corners of the frame to insure its being spaced properly
inside the frame.
Things to Remember: Practically every installation will have its
own individual problem. For instance, you may ind in using your
old frame that it is not large enough to lace the screen on the
inside, in which case you would place the hooks on the front and
outer edge of the frame. For this purpose we recommend using
rooing nails every six inches, leaving one-fourth inch out of the
wood for the lacing cord.
Matte-White
High Contrast Matte White
Glass Beaded
Pearlescent
Da-Mat
High Contrast Da-Mat
Da-Tex (Rear)
High Power
Silver Vision
Cinema Vision
High Contrast Cinema Vision
High Contrast Cinema Perf
Dual Vision
Video Spectra® 1.5
Silver Matte
Audio Vision
High Contrast Audio Vision
3
Zig Zag Lacing of lacing cord alternately through grommets
and under hooks is a method that will produce good results.
Use this method where it is necessary to lace a screen to a pipe
frame without hooks.
Zig Zag Lacing
Single Loop Lacing is fast since each loop is merely doubled,
pushed through the grommet and down over the screw hook.
Alignment between grommet and screw hook must be straight
to avoid puckering of picture surface.
Single Loop Lacing
Diagonal Lacing provides a desirable tension on the fabric.
It facilitates putting the correct tension in the correct direction
regardless of the grommet and hook relationship.
Diagonal Lacing
Double Loop Lacing tends to eliminate any tendency of the
picture surface to creep at the edges or unnecessary puckering.
This is overcome by pulling each loop over two hooks.
Double Loop Lacing
Shock Cord Lacing calls for elastic lacing cord (approx. 3/16" dia.)
and “S“ hooks (approx. 11/2") which are inserted in grommet
holes. This is the fastest method and usually considered
adequate. (Shock cord not supplied by Da-Lite.)
Shock Cord (Elastic) Lacing
Spring Mounting is a more expensive method, usually reserved
for rear screens used out of doors. Here grommet holes must
be in perfect alignment with the screw hooks. (Springs not
supplied by Da-Lite.)
Spring Lacing
No. 10
Screw
Hooks
Lacing
Cord
No. 10
Screw
Hooks
Lacing
Cord
Wood Frame
No. 10
Screw
Hooks
Lacing
Cord
Wood Frame
Wood Frame
No. 10
Screw
Hooks
Lacing
Cord
Wood Frame
No. 10
Screw
Hooks
Springs
Wood Frame
No. 10
Screw
Hooks
Shock
Cord
Wood Frame
“S“ Hooks
6"
6" 6" 4.5"
6"
6" 6" 4.5"
6"6" 6" 4.5"
2.5"
6"
6"
6"
6"
6"
6"
4.5"
4.5"
6"6" 6" 4.5"
6"
6"
4.5"
6"6" 6" 4.5"
6"
6"
2.5"
6"6" 6" 4.5"
6"
6"
4.5"


Produktspezifikationen

Marke: Da-Lite
Kategorie: Nicht kategorisiert
Modell: Lace And Grommet 91555

Brauchst du Hilfe?

Wenn Sie Hilfe mit Da-Lite Lace And Grommet 91555 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Nicht kategorisiert Da-Lite

Bedienungsanleitung Nicht kategorisiert

Neueste Bedienungsanleitung für -Kategorien-