Da-Lite Heavy Duty Fast-Fold Deluxe 95746K Bedienungsanleitung

Da-Lite Projektionsfläche Heavy Duty Fast-Fold Deluxe 95746K

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Da-Lite Heavy Duty Fast-Fold Deluxe 95746K (4 Seiten) in der Kategorie Projektionsfläche. Dieser Bedienungsanleitung war für 23 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/4
INSTRUCTION BOOK FOR
Heavy Duty Fast-Fold®
Deluxe Frame
2
Instructions
1. Unfold the 4 sections of Heavy Duty Fast-Fold ® Deluxe frame,
lock all latches and lay face up on the loor. See Figure 1.
2. Attach top and bottom sections to side sections and tighten the
Speedy Cranks securely. See Figures 2 and 3. Mount Back Braces
to the top and bottom sections (for screens 22' and wider) and
tighten the winghead screws securely.
Figure 1
Top Section
Top Section
Stage Right
Side Section
Stage Right
Side Section
Stage Left
Side Section
Bottom Section
Bottom Section
Figure 2
Stage Left
Side Section
Figure 3
Top Section
Side
Section
Top/Bottom Section
Side Section
Heavy Duty Fast-Fold® Deluxe Frame Construction
Heavy Duty Leg
Side Frame
ABrace
Anti-Sway Brace
(Mounted Inside When
Used Without Drapes)
Top Frame
Anti-Sway Brace
(Mounted Outside When
Used With Drapes)
Bottom Frame
Back Brace
Mounted To Both
Top And Bottom Of
Frame For Screens
22' And Wider
3
3. Attach Heavy Duty Fast-Fold® Deluxe legs to side frame
members at desired height, using Speedy Cranks.
Note color tape on legs and frame. When matched, the
screen height will be 44" of the loor. If legs are too high, top
section or sections may be folded over. Unfold the frame feet
(for screens 17' and wider) and leg feet. See Figure 4. Do not
tighten Speedy Cranks until all are started, then tighten.
4. Lay the frame on theloor.
5. Match top of screen surface (labeled TOP) with top of frame.
6. Snap all four corners.
7. Starting at the bottom section, snap the center button.
Continue snapping the remaining buttons.
8. Snap the top and sides in the same manner.
9. Attach Leg to each side of frame using at least 2 Speedy
Cranks per leg. NOTE: Speedy Crank at bottom of leg should
be on side of leg away from screen. Do not tighten Speedy
Cranks until all are started.
10. Height Adjustment. Heavy Duty Fast-Fold® Deluxe screen
height is adjustable in 6" increments either up or down.
Normal screen height is 44" from bottom of frame to
loor and is the standard height for use with presentation
drapery accessories.
NOTE: Do not extend frame so that more than half
of the frame height is above the top of the legs.
11. Raise front foot of each leg and lock corner brace.
12. With one person at each leg, raise to standing position.
NOTE: With large screens, more than 2 people may be
required.
13. Lower back foot, lock corner brace and attachA brace
from rear foot to back member of truss leg.
14. Attach anti-sway braces to legs.
15. To pack, reverse procedure. Use caution to prevent
surface damage.
Instructions
Figure 4
Truss Frame Feet
(For Screens 17' And Wider)
Leg Truss Frame
Leg Feet


Produktspezifikationen

Marke: Da-Lite
Kategorie: Projektionsfläche
Modell: Heavy Duty Fast-Fold Deluxe 95746K

Brauchst du Hilfe?

Wenn Sie Hilfe mit Da-Lite Heavy Duty Fast-Fold Deluxe 95746K benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Projektionsfläche Da-Lite

Bedienungsanleitung Projektionsfläche

Neueste Bedienungsanleitung für -Kategorien-