Da-Lite Fast-Fold Truss 41607 Bedienungsanleitung

Da-Lite Nicht kategorisiert Fast-Fold Truss 41607

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Da-Lite Fast-Fold Truss 41607 (2 Seiten) in der Kategorie Nicht kategorisiert. Dieser Bedienungsanleitung war für 23 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/2
PACKING INSTRUCTIONS FOR
Folding Screen Surfaces
79655
A Milestone AV Technologies Brand
3100 North Detroit Street
Warsaw, Indiana 46582
P: 574.267.8101 or 800.622.3737
F: 574.267.7804 or 877. 325.4832
E: info@da-lite.com
www.da-lite.com
DL–0341 5.14
© 2014 Milestone AV Technologies LLC. Printed in U.S.A .
Folding Instructions Folding Instructions (continued)
Please follow the steps as outlined below when folding the screen material
for packing:
1. Make sure the surface does not come in contact with a painted, varnished,
plastic, or dyed surface or object. Prolonged contact with any one of these
materials could cause a chemical reaction and compromise the screen’s
physical or optical quality. This can be accomplished by laying a white clean
cotton fabric or paper (slightly larger than the screen size) on a lat surface
prior to folding the screen.
2. With the dull side up on Da-Mat®, Da-Tex®, Dual Vision, and 3D Virtual Black®
and the pearlescent side up on Pearlescent and Cinema Vision fold the fabric
in half from top to bottom. (A 7.5' x 10' screen is now 3.75' x 10'.) Make sure
that the screen never comes in contact with the black binding,
grommets or snap buttons. Please note that for this to happen, one
must make sure all folds subsequent to the irst fold stop short of black
binding material as illustrated below.
3. Place clean tissue paper or white 100% cotton material between the folds.
4. If the folded area is more than 3 feet wide (which is the case in the above
example), then continue to fold until the folded area is equal to or smaller
than 3 feet wide. Please remember that all folds subsequent to the irst
fold must stop short of the black binding material to keep the viewing
area away from it and the snap buttons as illustrated above.
Storage
1. The screen surface must be stored in its pouch when not in use to prevent
damage and discoloration.
2. While in storage, avoid extreme temperature conditions. If surface becomes
sticky, see cleaning instructions below.
3. If stored at temperatures far below room temperature, allow the screen to
warm up to room temperature before unfolding. This will ensure the ilm is
being handled in its most lexible state and will prevent surface cracks.
Cleaning
Surfaces can be cleaned as follows:
Using a white clean cloth (100% cotton preferred) that is dampened with clear
water, gently wipe the area in one direction. Do not use a circular motion. Using a
dry 100% cotton cloth, wipe dry after each cleaning session. To clean a stubborn
stain or a sticky surface, use denatured alcohol (methanol or methyl alcohol)
following the same procedure as for water. For extremely stubborn stains, use
V M & P, Naphtha or Super Naphtha and follow the same procedure as for water.
Storage And Cleaning
5. Once the top to bottom folding is completed, fold from left to right and
continue folding until the folded area is small enough to it into the vinyl
pouch. Please note that the inal fold must stop short of the black binding
material to keep the viewing area away from it and the snap buttons
as illustrated.
Step One
Step Five
Step Four
Step Three
Step Two
Do Not Fold
Fabric Onto
Black Binding,
Grommets Or
Snap Buttons
Do Not Fold
Fabric Onto
Black Binding,
Grommets Or
Snap Buttons


Produktspezifikationen

Marke: Da-Lite
Kategorie: Nicht kategorisiert
Modell: Fast-Fold Truss 41607

Brauchst du Hilfe?

Wenn Sie Hilfe mit Da-Lite Fast-Fold Truss 41607 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Nicht kategorisiert Da-Lite

Bedienungsanleitung Nicht kategorisiert

Neueste Bedienungsanleitung für -Kategorien-