CRUX VRFTY-71E Bedienungsanleitung

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für CRUX VRFTY-71E (4 Seiten) in der Kategorie niet gecategoriseerd. Dieser Bedienungsanleitung war für 3 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/4
CTY-01T Tacoma/Tundra Tailgate Handle Camera CTY-02T Tacoma Tailgate Handle Camera (2006-2015)
VRFTY-71E
Front & Rear + 1 Video Camera Integration Interface with A/V Input
for Select Toyota Vehicles with Entune Radios
R
INTERFACING SOLUTIONS
Sightline
Multi View Integration
Crux Interfacing Solutions • 21541 Nordhoff St., Unit C, Chatsworth, CA 91311
phone: (818) 609-9299 • fax: (818) 996-8188 • www.cruxinterfacing.com
rev.022019
1 of 4
- Adds front and rear view camera inputs, plus 1 extra video input.
- Adds an addional audio/video input.
- Uses the steering wheel control buons to toggle between the sources.
- Retains factory backup camera if present.
PRODUCT FEATURES:
PARTS INCLUDED:
VRFTY-71E Module VRFTY-71E Harness
OPTIONAL ADD-ON CAMERAS:
Oponal aermarket add on cameras are available for the VRFTY-71E. Cameras available and sold separately
include: (More cameras can be found at www.cruxinterfacing.com)
CFF-01 Bullet Type Front Camera
(Recommended)
CFF-02 Square Body Front Camera CUL-04 Lip Mount Backup Camera
Crux Interfacing Solutions • 21541 Nordhoff St., Unit C, Chatsworth, CA 91311
phone: (818) 609-9299 • fax: (818) 996-8188 • www.cruxinterfacing.com
rev.022019
2 of 4
INSTALLATION DIAGRAM:
R
INTERFACING SOLUTIONS
Sightline
Multi View Integration
DIP SWITCH SETTINGS:
DIP# ON OFF
1No Funcon – Leave OFF
2 Front Camera ON Front Camera OFF
3 Set to OFF
4 Set to OFF
5 Video Input ON Video Input OFF
6 Set to OFF
7 AUX A/V ON AUX A/V OFF
8 Set to OFF
VRFTY-71E
Front & Rear + 1 Video Camera Integration Interface with A/V Input
for Select Toyota Vehicles with Entune Radios
Front Camera Input
Video Input
Aftermarket Backup Camera Input
Audio/Video
Input
Front and Rear Camera Power Output +12V (purple/white)
Video In Power Output +12V (orange/white)
To Vehicle Harness
28 PIN10 PIN 24 PIN
To Radio
Connect this 6-pin plug if OEM
backup camera is being used
DIP Switches
Crux Interfacing Solutions • 21541 Nordhoff St., Unit C, Chatsworth, CA 91311
phone: (818) 609-9299 • fax: (818) 996-8188 • www.cruxinterfacing.com
rev.022019
3 of 4
R
INTERFACING SOLUTIONS
Sightline
Multi View Integration
VRFTY-71E
Front & Rear + 1 Video Camera Integration Interface with A/V Input
for Select Toyota Vehicles with Entune Radios
VRFTY-71E module installaon on a Toyota Tacoma:
1. Carefully pull out the radio trim bezel. The trim bezel is
aached to the dashboard by these clips.
2. Remove the 4 screws holding the radio and unplug the
connectors. Set the radio to the side.
3. Install the front and back up cameras and the extra video
source (if applicable), and run the video wires towards the
radio.
4. Make the video RCA connecons at the VRFTY-71E
harness. See diagram on page 2 for the camera power
connecons.
1. Press and hold the HANG UP buon for 3 seconds to turn on forced camera view mode. Each press of the buon
thereaer toggles which ever cameras are turned on using the DIP switches. It will also toggle to AV mode. (Forced view
of the backup camera is only available if using an aermarket backup camera.) While in reverse gear, press and hold the
HANG UP buon to toggle between reverse, and the extra video input.
OPERATION:

Produktspezifikationen

Marke: CRUX
Kategorie: niet gecategoriseerd
Modell: VRFTY-71E

Brauchst du Hilfe?

Wenn Sie Hilfe mit CRUX VRFTY-71E benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung niet gecategoriseerd CRUX

Bedienungsanleitung niet gecategoriseerd

Neueste Bedienungsanleitung für -Kategorien-