CRUX VRFGM-80J Bedienungsanleitung


Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für CRUX VRFGM-80J (5 Seiten) in der Kategorie Nicht kategorisiert. Dieser Bedienungsanleitung war für 4 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/5
VRFGM-80J
Front and Rear View Camera Integration Interface for
GM LAN 29-Bit Vehicles 2006-2015
R
INTERFACING SOLUTIONS
Sightline
Multi View Integration
Crux Interfacing Solutions • 21541 Nordhoff St., Unit C, Chatsworth, CA 91311
phone: (818) 609-9299 • fax: (818) 996-8188 • www.cruxinterfacing.com
rev.022019
1 of 5
- Adds a front and rear camera input plus 1 extra video input for another camera or video source*.
- Uses a factory steering wheel control buon to force view the aermarket cameras and/or video source.
- Ability to toggle from back-up camera to the extra video input while in reverse gear. Perfect for adding a cargo or
trailer camera.
- Plug and play installaon.
PRODUCT FEATURES:
PARTS INCLUDED:
VRFGM-80J Module VRFGM-80J Harness
OPTIONAL ADD-ON CAMERAS:
Oponal add on cameras are available for the VRFGM-80J. Cameras available and . Please visit sold separately
www.cruxinterfacing.com for a complete list of cameras available for your vehicle. Below are some sample
cameras that can be used :
CFF-01 Bullet Type Front Camera CFF-02 Square Body Front Camera CFF-03 Grille Mount Front Camera
CGM-03 Cargo Camera CUL-16 Lip Mount Rear Camera CGM-02S Tailgate Handle Camera
*Factory Audio Aux Input is required if video input will be used for AV sources.
NOTE:
If your vehicle is not equipped with a factory backup camera, you will need to have the radio coded for a backup
camera at the dealership before using the VRFGM-80J.
Crux Interfacing Solutions • 21541 Nordhoff St., Unit C, Chatsworth, CA 91311
phone: (818) 609-9299 • fax: (818) 996-8188 • www.cruxinterfacing.com
rev.022019
2 of 5
INSTALLATION DIAGRAM:
R
INTERFACING SOLUTIONS
Sightline
Multi View Integration
DIP SWITCH SETTINGS:
DIP# ON OFF
1No Funcon – Leave OFF
2 Front Camera ON Front Camera OFF
3 No Funcon – Leave OFF
4No Funcon – Leave OFF
5Video Input / Cargo Camera ON Video Input/Cargo Camera OFF
6 No Funcon – Leave OFF
7No Funcon – Leave OFF
8Set to ON
VRFGM-80J
Front and Rear View Camera Integration Interface for
GM LAN 29-Bit Vehicles 2006-2015
Front Camera Input
Video / Cargo Camera Input
Aftermarket Backup Camera Input
Front and Rear Camera Power Output 12V (purple/white)
Cargo Camera Power Output 12V (orange/white)
To Vehicle Harness
Connect this 6-pin plug if OEM
backup camera is being used
DIP Switches
FORCED VIEW CAMERA SEQUENCE:
Using OEM backup Camera
FRONT VIDEO INPUT/CARGO CAMERA
Using Aermarket backup Camera
FRONT BACKUP VIDEO INPUT/CARGO CAMERA
Crux Interfacing Solutions • 21541 Nordhoff St., Unit C, Chatsworth, CA 91311
phone: (818) 609-9299 • fax: (818) 996-8188 • www.cruxinterfacing.com
rev.0220193 of 5
R
INTERFACING SOLUTIONS
Sightline
Multi View Integration
1. Carefully remove the trim around
the radio using plasc pry tools.
2. Remove the 4 screws holding the
radio.
3. Unplug the Black and Brown
connectors and mate them to the
VRFGM-80J T-harness.
4. Mount the cameras to be used and
run the cables to the radio.
5. Plug the camera RCAs to the
corresponding RCA inputs on the
T-harness.
6. Connect the camera power wires to
the corresponding camera power wires
on the T-harness. Apply tape to each
connecon.
7. Prior to reinstalling the radio,
test each camera connected for
funconality. See next page for
Operaon Instrucons.
CFF-03 Grille Mount Front Camera
VRFGM-80J
Front and Rear View Camera Integration Interface for
GM LAN 29-Bit Vehicles 2006-2015
INSTALLATION INSTRUCTIONS:


Produktspezifikationen

Marke: CRUX
Kategorie: Nicht kategorisiert
Modell: VRFGM-80J

Brauchst du Hilfe?

Wenn Sie Hilfe mit CRUX VRFGM-80J benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Nicht kategorisiert CRUX

Bedienungsanleitung Nicht kategorisiert

Neueste Bedienungsanleitung für -Kategorien-