CRUX VRFCH-75U Bedienungsanleitung


Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für CRUX VRFCH-75U (3 Seiten) in der Kategorie Nicht kategorisiert. Dieser Bedienungsanleitung war für 4 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/3
VRFCH-75U
Front View Integration Interface + 2 AV Inputs
for Select Jeep Compass and Renegade with Uconnect
R
INTERFACING SOLUTIONS
Sightline
Multi View Integration
Crux Interfacing Solutions • 21541 Nordhoff St., Unit C, Chatsworth, CA 91311
phone: (818) 609-9299 • fax: (818) 996-8188 • www.cruxinterfacing.com
rev.012819
1 of 3
• Front View Camera + 2 AV nputs
• Automacally switches screen to Rear-view when Reverse gear is engaged and to Front camera view when gear is
engaged to drive
• Manual acvaon of the front camera using the steering wheel control buon
• Plug & Play Installaon
• Video in Moon funcon
PRODUCT FEATURES:
PARTS INCLUDED:
VRFCH-75U Module VRFCH-75U Harness Video Harness Audio Harness
INSTALLATION DIAGRAM:
To Radio
OEM Radio
Harness
8-Pin Molex
ACC (Red)
12V Constant (Yellow)
Ground (Black)
12V Camera Power (Blue)
Audio In 1
Audio In 2
Video 1
Video 2
Front Camera
Video 4
Video Out Not Used
Not Used
Front Camera
(not included)
Audio IN to Radio Audio OUT from Interface
DIF. Video IN
DIF. Video OUT
For vehicles with factory installed backup camera ONLY.
Crux Interfacing Solutions • 21541 Nordhoff St., Unit C, Chatsworth, CA 91311
phone: (818) 609-9299 • fax: (818) 996-8188 • www.cruxinterfacing.com
rev.0128192 of 3
R
INTERFACING SOLUTIONS
Sightline
Multi View Integration
DIP SWITCH SETTINGS:
INSTALLATION INSTRUCTIONS:
INSTALLING THE INTEFACE MODULE
1. Carefully remove the radio to gain access to the radio harness.
2. Unplug the radio connector and plug it into the female connector of the VRFCH-75U T-harness.
3. Plug in the T-harness (10-pin Molex connector), Video and Audio harnesses to the VRFCH-75U module.
4. Install the front camera (not included) following the manufacturers instrucons.
5. Aer installaon of the front camera, plug in the camera’s video RCA to the female RCA (Front Camera) and connect the
camera power to the BLUE wire (Front Camera Power 12V) of the VRFCH-75U harness.
6. Plug in any other Audio/Video devices to be installed to the AV inputs of the VRFCH-75U.
7. Connect the AUDIO IN and AUDIO OUT on the VRFCH-75U harness. See diagram on page 1.
8. Connect the DIF. Video IN and DIF. Video OUT connectors. See diagram on page 1.
9. Set the DIP switches on the VRFCH-75U module following the chart above.
10. Connect the ACC, 12V Constant and Ground wires of the VRFCH-75U to the vehicle power. See diagram on page 1.
SETTING DIP 1 DIP2 DIP3 DIP4 DIP5 DIP6 DIP7 DIP8
ON AV 1 Enabled AV 2 Enabled Front Camera
Enabled Set to OFF Set to OFF Manual
Transmission Brightness
Set to ON* Set to ON
OFF AV 1 Disabled AV 2 Disabled Front Camera
Disabled Set to OFF Set to OFF Automac
Transmission
The interface module is installed behind the headunit.
VRFCH-75U
Front View Integration Interface + 2 AV Inputs
for Select Jeep Compass and Renegade with Uconnect
*We recommend seng DIP #7 to ON, however, if the video does not display correctly, set DIP #7 to OFF instead.
OPERATION:
1. Pung the gear in REVERSE automacally shows the rear
camera onto the display.
2. If a front camera is installed, the VRFCH-75U automacally shows the front camera for
10 seconds or unl the vehicle reaches a speed of 10 MPH aer a reverse process.
P
R
N
D
_
+
P
R
N
D
_
+
Crux Interfacing Solutions • 21541 Nordhoff St., Unit C, Chatsworth, CA 91311
phone: (818) 609-9299 • fax: (818) 996-8188 • www.cruxinterfacing.com
rev.0128193 of 3
R
INTERFACING SOLUTIONS
Sightline
Multi View Integration
VRFCH-75U
Front View Integration Interface + 2 AV Inputs
for Select Jeep Compass and Renegade with Uconnect
3. To enter or exit the AV mode, please and hold the middle
buon on the right rear side steering wheel controls for 3
seconds.
4. A quick press of the middle buon on the right side steering
wheel controls toggles between the AV sources.
3. To enter forced camera view mode, please and hold the
buon on the le side steering wheel controls for 3 seconds.
4. A quick press of the buon on the le side steering wheel
controls toggles between Front and Rear view cameras.
OK
VEHICLE APPLICATIONS:
JEEP
2017 - 2018 Compass
2015 - 2018 Renegade Uconnect
Radio Compability:
NOTE:
Vehicle must have a factory installed backup camera.
2017 Compass 2017 Renegade


Produktspezifikationen

Marke: CRUX
Kategorie: Nicht kategorisiert
Modell: VRFCH-75U

Brauchst du Hilfe?

Wenn Sie Hilfe mit CRUX VRFCH-75U benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Nicht kategorisiert CRUX

Bedienungsanleitung Nicht kategorisiert

Neueste Bedienungsanleitung für -Kategorien-