CRUX VRFCH-75L Bedienungsanleitung

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für CRUX VRFCH-75L (4 Seiten) in der Kategorie niet gecategoriseerd. Dieser Bedienungsanleitung war für 2 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/4
CDR-31C Cargo Camera
for RAM Trucks
CDR-02 Tailgate Handle Camera CUB-15 Adjustable Angle Camera
VRFCH-75L
Front & Rear + 1 Video Camera Integration Interface with A/V Input for
DODGE, JEEP & RAM Vehicles with Uconnect 8.4” Systems
R
INTERFACING SOLUTIONS
Sightline
Multi View Integration
Crux Interfacing Solutions • 21541 Nordhoff St., Unit C, Chatsworth, CA 91311
phone: (818) 609-9299 • fax: (818) 996-8188 • www.cruxinterfacing.com
rev.022120
1 of 4
- Adds a front, backup and cargo camera input.
- Adds an audio/video input.
- Uses a factory steering wheel control buon to force view the video sources. (except OEM backup camera. See page 3)
- Retains factory backup camera if present.
- Plug and play installaon.
PRODUCT FEATURES:
PARTS INCLUDED:
VRFCH-75L Module VRFCH-75L Harness
OPTIONAL ADD-ON CAMERAS:
Oponal add on cameras are available to complete the mul-view capability of the VRFCH-75L. Cameras available
and include:sold separately
CFF-01 Bullet Type Front Camera CFF-02 Square Body Front Camera CFF-03 Grille Mount Front Camera
Crux Interfacing Solutions • 21541 Nordhoff St., Unit C, Chatsworth, CA 91311
phone: (818) 609-9299 • fax: (818) 996-8188 • www.cruxinterfacing.com
rev.022120
2 of 4
INSTALLATION DIAGRAM:
R
INTERFACING SOLUTIONS
Sightline
Multi View Integration
Front Camera Input
Aftermarket Backup Camera Input
Cargo Camera Input
Audio/Video
Input
Front and Rear Camera Power Output 12V (purple/white)
Cargo Output 12V (orange/white)
Video AUX Power Output 12V (red/white)
To Vehicle Harness
To Radio
Connect this 6-pin plug if OEM
backup camera is being used
DIP SWITCH SETTINGS:
DIP# ON OFF
1No Funcon – Leave OFF
2 Front Camera ON Front Camera OFF
3No Funcon – Leave OFF
4No Funcon – Leave OFF
5 Cargo Camera ON Cargo Camera OFF
6No Funcon – Leave OFF
7 AUX A/V ON AUX A/V OFF
8 Set to OFF
VRFCH-75L
Front & Rear + 1 Video Camera Integration Interface with A/V Input for
DODGE, JEEP & RAM Vehicles with Uconnect 8.4” Systems
Crux Interfacing Solutions • 21541 Nordhoff St., Unit C, Chatsworth, CA 91311
phone: (818) 609-9299 • fax: (818) 996-8188 • www.cruxinterfacing.com
rev.022120
3 of 4
R
INTERFACING SOLUTIONS
Sightline
Multi View Integration
OPERATION:
1. Whether an aermarket or OEM backup camera is used,
pung the gear in reverse will automacally show the
backup camera image on the screen.
2. Pung the gear to drive aer the reverse process
turns on the front camera for 7 seconds.
3. To force view the cameras installed, press and hold the
rear right side steering wheel control middle buon to
toggle through the cameras. (Forced view of the backup
camera is only available if using an aermarket backup
camera.) While in reverse gear, press and hold the same
buon to toggle between reverse camera and video input
(i.e cargo or trailer camera).
4. To use the AV input, press and hold the le rear side
steering wheel control middle buon to toggle to AV
mode. Audio plugged in the AV RCAs will automacally
be heard through the OE audio system. No need to plug
to the AUX input of the vehicle.
VRFCH-75L
Front & Rear + 1 Video Camera Integration Interface with A/V Input for
DODGE, JEEP & RAM Vehicles with Uconnect 8.4” Systems
FORCED VIEW CAMERA SEQUENCE:
Using OEM backup Camera
FRONT VIDEO INPUT
Using Aermarket backup Camera
FRONT BACKUP VIDEO INPUT

Produktspezifikationen

Marke: CRUX
Kategorie: niet gecategoriseerd
Modell: VRFCH-75L

Brauchst du Hilfe?

Wenn Sie Hilfe mit CRUX VRFCH-75L benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung niet gecategoriseerd CRUX

Bedienungsanleitung niet gecategoriseerd

Neueste Bedienungsanleitung für -Kategorien-