CRUX SWRMZ-64C Bedienungsanleitung


Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für CRUX SWRMZ-64C (3 Seiten) in der Kategorie Nicht kategorisiert. Dieser Bedienungsanleitung war für 3 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/3
Crux Interfacing Solutions • Chatsworth, CA 91311
phone: (818) 609-9299 • fax: (818) 996-8188 • www.cruxinterfacing.com
rev.092120
SWRMZ-64C
Radio Replacement with Steering Wheel Control Retention
for Select MAZDA Vehicles
1 of 3
RAD IO RE PLAC EME NT
SWC RE TENT IO N
+
R
INTERFACING SOLUTIONS
- Retains factory features in Select Mazda vehicles while funconing with an aermarket radio.
- Pre-programmed to retain factory Steering Wheel Controls.
- Retains factory Bluetooth steering wheel control buons (if equipped - see page 2).
- Supports vehicles with analog Bose® audio systems.
- EIA color coded wiring for easy installaon.
PRODUCT FEATURES:
PARTS INCLUDED:
SWRMZ-64C Module SWRMZ-64C Harness SWC Cable
INSTALLATION DIAGRAM:
AFTERMARKET
RADIO
+12V Constant Yellow
+12V ACC Red
Ground Black
Illumination Orange
Amp Turn On Blue/ White
Right Front (+) Gray
Right Front (-) Gray/Black
Left Front (+) White
Left Front (-) White/Black
Right Rear (+) Violet
Right Rear (-) Violet/Black
Left Rear (+) Green
Left Rear (-) Green/Black
TO FACTORY
HARNESS
12-Pin Black
Connector
4-Pin
Connector
Cap or insulate if
not being used
Kenwood/JVC (BLUE / YELLOW)
3.5MM SWC CABLE
Plug in the 3.5MM SWC cable to the 4-pin port
on the module. See “DIP SWITCH SETTINGS section.
ON RADIO VEHICLE
1 2 3 4 5 6 7 8
AFTERMARKET
RADIO SELECTOR
(See Chart)
MAZDA
SWC SETTING
(OFF ON ON ON)
ON RADIO VEHICLE
1 2 3 4 5 6 7 8
SWC BT
INPUT
SWC Phone
To aftermarket
radio SWC port
Crux Interfacing Solutions • Chatsworth, CA 91311
phone: (818) 609-9299 • fax: (818) 996-8188 • www.cruxinterfacing.com
rev.092120
SWRMZ-64C
Radio Replacement with Steering Wheel Control Retention
for Select MAZDA Vehicles
2 of 3
RAD IO RE PLAC EME NT
SWC RE TENT IO N
+
R
INTERFACING SOLUTIONS
FACTORY SWC PHONE BUTTON RETENTION:
Some Mazda models have the factory SWC phone buon wire located at the Bluetooth unit harness
while others are on the radio connector. Please see diagram below for a list of vehicles that have the
SWC phone buon wire at the Bluetooth unit harness. You will need to tap the BLUE “SWC BT INPUT”
wire on the SWRMZ-64C harness to the wire specied on the diagram. Leave the BT Unit connector
unplugged aer tapping the BLUE “SWC BT INPUT” wire.
NOTE: The OEM bluetooth unit is located behind the glove box.
For vehicles with phone buons on the SWC but are not listed on the diagram, connect the BLUE wire
labeled “SWC BT INPUT” to the wire labeled “SWC Phone”, on the SWRMZ-64C harness. See page 3.
TO FACTORY
HARNESS
12-Pin Black
Connector
4-Pin
Connector
Cap or insulate if
not being used
Kenwood/JVC (BLUE / YELLOW)
Insulate with tape
if not being used
ON RAD IO VEHICLE
1 2 3 4 5 6 7 8
OEM Bluetooth UNIT
(see page 2 for location)
Vehicle SWC
Phone Button
(WHITE/RED wire)
For 2009-2013 Mazda 6:
Tap the BLUE wire from SWRMZ-64C harness
to the WHITE/RED wire on the factory Bluetooth
unit to retain the SWC phone button function
WRBR R
Y
R
W
GY
RRR
GY
GY
W
OG
LB
LB
W
RL
L
L
R
BW
W
V
G G
BG
B
PIN VIEW
AA YWUS O M
Q
GI ECA
AB Z X V T R P N L J H F D B
BR
GY
G G
L
P
GY
LG
* * * * *
* * * * * *
*
L
VY
OEM Bluetooth UNIT
(see page 2 for location)
B# #
S8
S8
Vehicle SWC
Phone Button
(PINK wire)
For 2010-2012 Mazda 3:
Tap the BLUE wire from SWRMZ-64C harness
to the PINK wire on the factory Bluetooth
unit to retain the SWC phone button function
PIN VIEW
OEM Bluetooth UNIT
(see page 2 for location)
Vehicle SWC
Phone Button
(GRAY wire)
For 2012-2015 Mazda 5:
Tap the BLUE wire from SWRMZ-64C harness
to the GRAY wire on the factory Bluetooth
unit to retain the SWC phone button function
GY V
R LGG
BR
Y
LRL
B
W
PIN VIEW
*
*
**
B
R
RGPO
**
**
*
*
*
*
*
*
*
*
*
OEM Bluetooth UNIT
(see page 2 for location)
Vehicle SWC
Phone Button
(BROWN wire)
For 2010-2012 Mazda CX7:
Tap the BLUE wire from SWRMZ-64C harness
to the BROWN wire on the factory Bluetooth
unit to retain the SWC phone button function
BR BR
R
B
WR
B
W
O
DL
L
R
RW
B
PIN VIEW
WR
BR
*
*
BR
GYR
RBO
*
*
*
*
*
*
*
*
*
*
* *
*
***SWC Phone Button Retention ***
SWC BT
INPUT
SWC Phone
Leave the BT Unit connector unplugged
after tapping the SWC BT INPUT wire
Crux Interfacing Solutions • Chatsworth, CA 91311
phone: (818) 609-9299 • fax: (818) 996-8188 • www.cruxinterfacing.com
rev.092120
SWRMZ-64C
Radio Replacement with Steering Wheel Control Retention
for Select MAZDA Vehicles
3 of 3
RAD IO RE PLAC EME NT
SWC RE TENT IO N
+
R
INTERFACING SOLUTIONS
DIP SWITCH SETTINGS:
AFTERMARKET RADIO DIP SWITCH SETTINGS:
RADIO BRAND: DIP: 1 2 3 4
Atoto, Dual, Farenheit, Jensen, Pioneer
Power Acoustik, Soundstream
Blaupunkt, Most o-brand Radios
Alpine
Clarion
Kenwood
JVC
Boss, Old Sony
New Sony
OFF OFF ON ON
OFF OFF ON ON
OFF OFF ON ON
OFF OFF OFF OFF
OFF ON ON OFF
OFF ON ON ON
OFF ON OFF ON
OFF ON OFF OFF
OFF OFF ON OFF
SWC MODULE
ON RADIO VEHICLE
1 2 3 4 5 6 7 8
NOTE: For Atoto, Blaupunkt, Dual, Farenheit, Power Acoustik, Soundstream, and most o-brand radios,
check the aftermarket radio’s manual to see if the SWC buttons need to be programmed.
3.5MM SWC CABLE
Plug in the 3.5MM to 4-Pin SWC cable to the SWC module. Plug the 3.5mm plug to the aermarket radio’s SWC port. JVC and
Kenwood radios will use the Blue/Yellow wire (not the 3.5mm plug). Insulate the Blue/Yellow wire or 3.5mm plug if not being
used.
STEERING WHEEL CONTROL DIP SWITCH SETTING:
DIP: 5 6 7 8
Mazda OFF ON ON ON
SWC MODULE
ON RADIO VEHICLE
1 2 3 4 5 6 7 8
VEHICLE APPLICATIONS:
MAZDA
2013 - 2015 CX-5
2007 - 2012 CX-7
2007 - 2015 CX-9
2011 - 2014 Mazda2
2004 - 2015 Mazda3 (not compable in models with 7” touch screen)
2006 - 2015 Mazda5
2003 - 2015 Mazda6
2002 - 2006 MPV
2006 - 2015 MX-5 Miata
2004 - 2011 RX-8
RED to SWC Key 1
WHITE to SWC Key 2
SHIELD to SWC Ground
For aermarket radios that have wires for SWC connecons,
cut o the 3.5mm plug on the Crux SWC Cable and connect
the SWC wires as follows:
Note that there are some radios that only have SWC1 and SWC2, in this case “shield” does not need to be connected.
TO FACTORY
HARNESS
12-Pin Black
Connector
ON RADIO VEHICLE
1 2 3 4 5 6 7 8
SWC BT
INPUT
SWC
PHONE
For vehicles with phone buons on
the SWC but are not listed on the
diagram on page 2, connect the BLUE
wire labeled “SWC BT INPUT” to the
wire labeled “SWC Phone”, on the
SWRMZ-64C harness.


Produktspezifikationen

Marke: CRUX
Kategorie: Nicht kategorisiert
Modell: SWRMZ-64C

Brauchst du Hilfe?

Wenn Sie Hilfe mit CRUX SWRMZ-64C benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Nicht kategorisiert CRUX

Bedienungsanleitung Nicht kategorisiert

Neueste Bedienungsanleitung für -Kategorien-