CRUX SWRHK-65E Bedienungsanleitung


Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für CRUX SWRHK-65E (2 Seiten) in der Kategorie Nicht kategorisiert. Dieser Bedienungsanleitung war für 9 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/2
Crux Interfacing Solutions • 21541 Nordhoff St., Unit C, Chatsworth, CA 91311
phone: (818) 609-9299 • fax: (818) 996-8188 • www.cruxinterfacing.com
rev.120319
SWRHK-65E
Radio Replacement with Steering Wheel Retention for
HYUNDAI and KIA Vehicles with 24 & 18 Pin Connectors
1 of 2
RADI O REPLAC EMEN T
SWC R ETENT IO N
+
R
INTERFACING SOLUTIONS
- Retains factory features in select Hyundai and Kia vehicles while functioning with an aftermarket radio.
- Retains factory 3.5mm Aux Input Jack (if equipped).
- Pre-programmed to retain factory Steering Wheel Controls.
- EIA color coded wiring for easy installation.
PRODUCT FEATURES:
PARTS INCLUDED:
INSTALLATION DIAGRAM:
SWRHK-65E MODULE SWRHK-65E HARNESS ANTENNA ADAPTER SWC CABLE
AFTERMARKET
RADIO
SWC
MODULE
AFTERMARKET
RADIO SELECTOR
(See Chart)
HYUNDAI / KIA TYPE
SWC SETTING
(OFF OFF ON ON)
illumination (+) Orange
Vehicle Speed Sensor Red/White
Antenna Turn ON Blue
+12V Constant Yellow
+12V ACC Red
Ground Black
Right Front (+) Gray
Right Front (-) Gray/Black
Left Front (+) White
Left Front (-) White/Black
Right Rear (+) Violet
Right Rear (-) Violet/Black
Left Rear (+) Green
Left Rear (-) Green/Black
Audio Signal from 3.5mm Jack Aux-In Red & White RCA
TO FACTORY
HARNESS
12-Pin Black
Connector
3.5MM SWC CABLE
Plug in the3.5MM SWC cable to the 4-pin port
on the module. See “DIP SWITCH SETTINGS” section.
24 & 18
PIN Connectors
Note:
Output signal(s) stated above may not cover all Year/Model.
HYUNDAI/KIA ANTENNA
ADAPTOR (Included)
ON RADIO VEHICLE
1 2 3 4 5 6 7 8
ON RADIO VEHICLE
1 2 3 4 5 6 7 8
4-Pin
Connector
Insulate with tape
if not used
Kenwood / JVC
Crux Interfacing Solutions • 21541 Nordhoff St., Unit C, Chatsworth, CA 91311
phone: (818) 609-9299 • fax: (818) 996-8188 • www.cruxinterfacing.com
rev.120319
2 of 2
RADI O REPLAC EMEN T
SWC R ETENT IO N
+
R
INTERFACING SOLUTIONS
VEHICLE APPLICATIONS:
Hyundai
2011 – 2016
2013 – 2016
2013 – 2016
2013 – 2016
2011 – 2016
2011 – 2015
2010 – 2015
2012 – 2013
Elantra
Genesis Coupe*
Santa Fe*
Santa Fe Sport*
Sonata*
Sonata Hybrid*
Tucson
Veloster
Kia
Late 2011 – 2013
2014 – 2015
2012 – 2013
2014 – 2016
2012 – 2013
Late 2011 – 2014
2011 – 2016
Optima
Optima*
Sorento (with UVO)*
Sorento*
Soul*
Rio
Sportage
SWRHK-65E
Radio Replacement with Steering Wheel Retention for
HYUNDAI and KIA Vehicles with 24 & 18 Pin Connectors
DIP SWITCH SETTINGS:
HYUNDAI / KIA STEERING WHEEL CONTROL DIP SWITCH SETTING:
AFTERMARKET RADIO DIP SWITCH SETTINGS:
NOTES:
*Without NAV.
Not compable with amplied systems.
DIP: 5 6 7 8
Hyundai OFF OFF ON ON
SWC MODULE
ON RADIO VEHICLE
1 2 3 4 5 6 7 8
RADIO BRAND: DIP: 1 2 3 4
Dual, Farenheit, Jensen, Pioneer
Power Acoustik, Soundstream
Blaupunkt, Most o-brand Radios
Alpine
Clarion
Kenwood
JVC
Boss, Old Sony
New Sony
OFF OFF ON ON
OFF OFF ON ON
OFF OFF ON ON
OFF OFF OFF OFF
OFF ON ON OFF
OFF ON ON ON
OFF ON OFF ON
OFF ON OFF OFF
OFF OFF ON OFF
SWC MODULE
ON RADIO VEHICLE
1 2 3 4 5 6 7 8
NOTE: For Blaupunkt, Dual, Farenheit, Power Acoustik, Soundstream, and most o-brand radios,
check the aftermarket radio’s manual to see if the SWC buttons need to be programmed.
3.5MM SWC CABLE
Plug in the 3.5MM to 4-Pin SWC cable and set the DIP switches to the aermarket radio you are using. Use the
Blue/Yellow wire for Kenwood and JVC radios and the 3.5mm plug for other radios.
NOTE: Insulate the Blue/Yellow wire or 3.5mm plug if not being used.


Produktspezifikationen

Marke: CRUX
Kategorie: Nicht kategorisiert
Modell: SWRHK-65E

Brauchst du Hilfe?

Wenn Sie Hilfe mit CRUX SWRHK-65E benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Nicht kategorisiert CRUX

Bedienungsanleitung Nicht kategorisiert

Neueste Bedienungsanleitung für -Kategorien-