CRUX RVCMB-78M Bedienungsanleitung


Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für CRUX RVCMB-78M (3 Seiten) in der Kategorie Nicht kategorisiert. Dieser Bedienungsanleitung war für 15 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/3
- No Dealer programming required.
- Activates the Rear-View Camera function of the Mercedes Benz Audio 15 radio.
- Includes lip mount camera.
- Compatible with NTSC cameras only.
RVCMB-78M Module
RVCMB-78M Harness
FAKRA to RCA Adaptor
Lip Mount Camera
Pin assignment of factory Quadlock connector:
Please note that the given information must be verified by the
installer. Crux Interfacing assumes no liability for changes in
wire color or pin assignments made by the vehicle manufacturer.
Pin assignment of RVCMB-78M 8-Pin Molex connector:
Cable color
Pin- No.
Assignment
Yellow
Pin 4
CAN-HIGH connection to the head-unit
Blue
Pin 3
CAN-LOW connection to the head-unit
Yellow/Black
Pin 8
CAN-HIGH connection to the vehicle
Blue/Black
Pin 7
CAN-LOW connection to the vehicle
Red
Pin 1
+12V Constant
Black
Pin 5
Ground
White
Pin 2
+12V rear view camera power (max. 400mA)
Pin No.
Pin 15
Pin 12
Pin 9
Pin 11
rev.030220
1/3
1. Connect female 8-pin Molex connector of the RVCMB-78M T-harness to male 8-pin Molex
connector on the RVCMB-78M module.
2. Unplug the female Quadlock connector of the vehicle harness from the rear of the head unit and
connect it to the male Quadlock connector of RVCMB-78M T-harness.
3. Remove the two 12-pin Quadlock plug inserts from the female Quadlock connector of the vehicle
harness and insert them into the same position on the female Quadlock connector of the
RVCMB-78M T-harness.
4. Plug female Quadlock connector of the RVCMB-78M T-harness to the male Quadlock connector
of the head unit.
5. Plug the FAKRA to RCA adaptor cable to the GREEN FAKRA connector on the radio.
6. Plug the camera’s extension cable to the FAKRA to RCA adapter and run the cable to the back of
the vehicle. Use the WHITE wire to power the camera (see diagram above).
7. Install the lip mount camera at the back of the vehicle next to the license plate light.
3
1
2
4
5
6
rev.030220
2/3
*Camera Loop Wires:
White wire: Cut to remove Parking lines
Blue wire: Cut for top mount
*Camera Loop
wires
Vehicle/ Navigation
DIP 1
DIP 2
DIP 3
DIP 4
DIP 5
DIP 6
Camera Coding
ON
OFF
OFF
OFF
ON
ON
Camera Decoding
OFF
OFF
OFF
OFF
ON
ON
DIP Switch functions:
DIP Camera coding 1
DIP no function 2
DIP 3 no function
DIP no function 4
DIP CAN-bus termination resistor on the vehicle side 5
DIP CAN-bus termination resistor on the head-unit side 6
Rear-view camera coding
1. 1, Set DIP switch# 6 to ON (2, 3, 4 = OFF). 5,
2. Turn ignition on (Note: Do not start engine ).
3. Wait until the radio has booted.
4. Shift reverse gear appears on the screen and after a short time, the radio turns off). to (“Diag”
5. Turn on the radio back on manually (press ON button).
6. The coding process is now complete.
7. Shift to reverse gear and verify that the camera image shows on the screen.
Rear-view camera decoding
1. Set DIP switch# 5 and 6 to ON (1, 2, 3, 4 = OFF)
2. Turn ignition on (Note: Do not start engine ).
3. Wait until the radio has booted.
4. Shift to reverse gear (“Diag” appears on the screen and after a short time, the radio turns off).
5. Turn on the radio back on manually (press ON button).
6. The coding process is now complete. de
7. Shift to reverse gear and verify that the camera image no longer shows on the screen.
MERCEDES BENZ
2016 2017 Metris
LED
Status
Description
Blue
Solid
CAN bus communication OK
Flashes
CAN bus search
Red
Solid
Rear-view camera is coded
OFF
Rear-view camera is not coded
rev.030220
3/3


Produktspezifikationen

Marke: CRUX
Kategorie: Nicht kategorisiert
Modell: RVCMB-78M

Brauchst du Hilfe?

Wenn Sie Hilfe mit CRUX RVCMB-78M benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Nicht kategorisiert CRUX

Bedienungsanleitung Nicht kategorisiert

Neueste Bedienungsanleitung für -Kategorien-