CRUX DKGM-C2S Bedienungsanleitung


Lesen Sie kostenlos die đź“– deutsche Bedienungsanleitung fĂĽr CRUX DKGM-C2S (8 Seiten) in der Kategorie Nicht kategorisiert. Dieser Bedienungsanleitung war fĂĽr 5 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/8
Crux Interfacing Solutions • Chatsworth, CA 91311
phone: (818) 609-9299 • fax: (818) 996-8188 • www.cruxinterfacing.com
rev.092921
DKGM-C2S
Radio Replacement with Single DIN Dash Kit for
GM Class II Vehicles 2002 - 2013
1 of 8
- Retains factory features in select GM Class II Data Bus vehicles while functioning with an aftermarket radio.
- Supports Bose, Y-91 and non-ampliîšżed audio systems.
- Retains chime functions such as: seat belt, check engine, key in ignition, low fuel, low oil and lights on.
- Retains RAP (Retained Accessory Power).
- Single DIN Dash Kit included.
- EIA color coded wiring for easy installation.
DKGM-C2S MODULE DKGM-C2S HARNESS SINGLE DIN DASH KIT
RA D I O R E P L ACE M E N T
+
R
INTERFACING SOLUTIONS
Crux Interfacing Solutions • Chatsworth, CA 91311
phone: (818) 609-9299 • fax: (818) 996-8188 • www.cruxinterfacing.com
2 of 8
DKGM-C2S
Radio Replacement with Single DIN Dash Kit for
GM Class II Vehicles 2002 - 2013
RA D I O R E P L ACE M E N T
+
R
INTERFACING SOLUTIONS
SELECTING THE AUDIO SYSTEM:
If the vehicle is equipped with an ampliîšżed audio system, the DKGM-C2S has a built-in audio level
adaptor that outputs the proper audio level from the aftermarket radio to the factory ampliîšżer. To use this
feature, plug in the male 8-pin connector on the DKGM-C2S harness to the GRAY female 8-pin connector
on the DKGM-C2S module. The module is also labeled “Bose” and “Non Bose” to avoid confusion. (see
picture below)
If the vehicle is NOT equipped with a factory ampliîšżed system, plug in the male 8-pin connector to the
BLACK female 8-pin on the DKGM-C2S module.
Non-BOSE
(Non-Amplied)
Connecîžźon
BOSE
(Amplied)
Connecîžźon
CHIME VOLUME ADJUSTMENT:
The DKGM-C2S has a potentiometer to adjust the chime volume. It is set at half way by default. To
adjust the volume, simply use a suitable screw driver and turn the potentiometer clockwise to increase
the volume and counter-clockwise to decrease the volume.
Chime
Volume
Adjustment
rev.092921
Crux Interfacing Solutions • Chatsworth, CA 91311
phone: (818) 609-9299 • fax: (818) 996-8188 • www.cruxinterfacing.com
3 of 8
DASH KIT INSTALLATION:
DKGM-C2S
Radio Replacement with Single DIN Dash Kit for
GM Class II Vehicles 2002 - 2013
RA D I O R E P L ACE M E N T
+
R
INTERFACING SOLUTIONS
Please make sure that you have all the parts as shown.
rev.092921


Produktspezifikationen

Marke: CRUX
Kategorie: Nicht kategorisiert
Modell: DKGM-C2S

Brauchst du Hilfe?

Wenn Sie Hilfe mit CRUX DKGM-C2S benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Nicht kategorisiert CRUX

Bedienungsanleitung Nicht kategorisiert

Neueste Bedienungsanleitung fĂĽr -Kategorien-