CRUX DKGM-49A Bedienungsanleitung


Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für CRUX DKGM-49A (4 Seiten) in der Kategorie Nicht kategorisiert. Dieser Bedienungsanleitung war für 9 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/4
- Retains factory features in select GM LAN 29 Bit truc and SUVs while functioning with an aftermarketks
radio.
- Pre-programmed to retain factory Steering Wheel Controls.
- iPhone Voice Recognition (VR) feature from SWC on select Kenwood, Pioneer, Alpine and JVC radios.
- Supports Pi Up/End Call, Pick-up and Toggle between 1st and 2nd incoming ca , AVRCP Track,ck ll
Seek.
- Supports Bose, non-Bose and Y-91 audio systems.
- Retains chime functions.
- Provides Factory Rear Seat Entertainment Activation. Requires Cable #CRUX2444A (sold separately).
- Retains factory back-up camera.
- EIA color coded wiring for easy installation.
GM-49A
Mo le du
GM-49A
Harness
SWC Cables Antenna Adaptor CRUX2444
Dash Kit
1 / 4
rev. 03232023
SETTING THE AFTERMARKET RADIO BRAND
With the key in the o osi on, set the DIP switches to the correspo ing radio listed below. ff p nd
3.5 SWC CABLE MM
Use the proper 3.5 to 4 pin SWC cable for the a ermarket radio being used:
OPTION A is used for ALPINE, CLARION, (JVC and KENWOOD units will use the Blue/Yellow wire).
OPTION B is used for ATOTO, BOSS, DUAL, FAHRENHEIT, JENSEN, POWER ACOUSTIK, PIONEER,
SONY, SOUND STREAM and most OFF-BRAND radios.
NOTE: C or insulate the 3.5mm plug or Blue/Yellow wire if not being used. ap
For a ermarket radios that have wires for SWC connec ns, cut o the 3.5mm lug on the Crux SWC Cable o ff p
(op on B) and co ect the SWC wires as foll s: nn ow
connected.
2 / 4
rev. 03232023
If the vehicle is e ipped with a Bose system, the DKGM-49A mo le has a ilt-in Bose adaptor that allows the qu du bu
proper audio in t gain from the rmarket radio to the Bose ampli er. To use this feature, plug in the male 8-pin pu ae fi
connector on the harne to the GRAY female 8-pin connector on the DKGM-49A mo le. The mo le is also labeled ss du du
If the vehicle is NOT e ipped with a Bose system, plug in the male 8 -pin connector to the BLACK female 8-pin on qu
the GM-49A mo le. du
The DKGM-49A mo le has a poten o ter to adj t the chime volu . It is set at halfway by default. To adjust du me us me
the volu , simply use a suitable screwdriver and turn the poten o ter clockwise to increase the volu a me me me nd
counter-clockwise to decrease the volu . me
You can retain use of the factory bac ca ra by using the CRUX2444 harne prkup me ss ovided in the kit. See below for
conne on i tru ons. (Note: Loose wires may not e n ded in the i talla n.) c ns c b ee ns o
NOTE:
Does not retain the factory ba up camera on models that show the camera image on the rearview mi or.ck rr
BOSE
Co ec on nn
Non-BOSE
Co ec on nn
Vol e um
Adjustment
3 / 4
rev. 03232023
AV INPUT
TO FACTORY
OVERHEAD
SCREEN
To AV
Input
To AV
Output
To Factory
20-Pin
Connector
AUDIO
MENU
SEEK
SEEK
RADIO
MEDIA
VOLUME
OPEN
CLOSE
1. Connect the Crux back-up camera 20 pin connector to the vehicle 20 pin conenctor
2. Connect the yellow video RCA to the new aftermarket radio reverse camera input.
3. Test the video feed before installing the radio back into the dashboard. (Radio may need to be set
prior to testing).


Produktspezifikationen

Marke: CRUX
Kategorie: Nicht kategorisiert
Modell: DKGM-49A

Brauchst du Hilfe?

Wenn Sie Hilfe mit CRUX DKGM-49A benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Nicht kategorisiert CRUX

Bedienungsanleitung Nicht kategorisiert

Neueste Bedienungsanleitung für -Kategorien-