Boska Unika+ Bedienungsanleitung
Boska
Schneidemaschine
Unika+
Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Boska Unika+ (32 Seiten) in der Kategorie Schneidemaschine. Dieser Bedienungsanleitung war für 30 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet
Seite 1/32
864112 GOL20M 1
INSTALLATION & USE
1 Remove the blade cover. Please note: the blade is sharp!
2 Plug the transformer into the socket (230v~50hz).
3 Set the temperature yourself with the temperature control, from level 1 to 10.
The knife is warm within 5-10 minutes.
4 Lay the cheese to be sliced with the rind against the clamping plate and the light yellow,
edible part of the cheese against the thickness regulator. Please note: do not press the cheese
against the thickness regulator; place the cheese against it and the blade will do the rest.
5 Adjust the knobs to obtain the desired slice thickness (max 15mm). To minimize slicing loss,
cut wedge-shaped slices;
5A Set the adjusting knob at the edge of the rind higher than the adjusting knob further away
from you, so that the cheese is nicely round-cut and you are not left with any unsalable pieces.
6 Bring the lever down to cut off a slice of cheese.
7 Turn the temperature controller off.
8 Turn the adjusting knobs back to 0 to prevent cuts.
EN
Unika +
CLEANING
• Make sure the temperature controller is turned off, the adjusting knobs are back to 0, the
plug has been removed from the socket and the appliance has cooled down fully.
• The Unika+ should be cleaned daily.
• Clean the Unika+ before you change to a different type of cheese, to prevent
cross-contamination.
• Use hot water, a soft brush and a neutral cleaning agent such as mild soap or washing-up
liquid to clean the Unika+.
• Make sure that the water is no hotter than 70°C to prevent damage to the plastic
components.
• Never clean with a hard-bristle brush, abrasive materials, cleaning agents containing
baking soda or chlorine, or disinfecting or corrosive cleaning agents.
• Rinse the Unika+ with clean water. Dry the machine thoroughly, to prevent components
from being damaged by dust and moisture.
• After cleaning, put the cover back on the blade.
2 864112 GOL20M
Unika +
EN
1 2 3
4 5 5A
6 7 8
864112 GOL20M 3
Produktspezifikationen
Marke: | Boska |
Kategorie: | Schneidemaschine |
Modell: | Unika+ |
Brauchst du Hilfe?
Wenn Sie Hilfe mit Boska Unika+ benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten
Bedienungsanleitung Schneidemaschine Boska
23 August 2023
Bedienungsanleitung Schneidemaschine
- Schneidemaschine Clatronic
- Schneidemaschine Domo
- Schneidemaschine Coline
- Schneidemaschine Ernesto
- Schneidemaschine Tristar
- Schneidemaschine Genius
- Schneidemaschine Makita
- Schneidemaschine Bosch
- Schneidemaschine Siemens
- Schneidemaschine Fagor
- Schneidemaschine Gorenje
- Schneidemaschine Rommelsbacher
- Schneidemaschine Sammic
- Schneidemaschine Switch On
- Schneidemaschine Vox
- Schneidemaschine ADE
- Schneidemaschine Cuisinart
- Schneidemaschine Eta
- Schneidemaschine Fritel
- Schneidemaschine Graef
- Schneidemaschine Kenwood
- Schneidemaschine Krups
- Schneidemaschine Wilfa
- Schneidemaschine Festool
- Schneidemaschine Exquisit
- Schneidemaschine Bartscher
- Schneidemaschine Hikoki
- Schneidemaschine Ritter
- Schneidemaschine Sencor
- Schneidemaschine Turmix
- Schneidemaschine Kalorik
- Schneidemaschine Rotel
- Schneidemaschine Saro
- Schneidemaschine Ufesa
- Schneidemaschine Dremel
- Schneidemaschine Team
- Schneidemaschine JAC
- Schneidemaschine Wabäma
- Schneidemaschine FAC
- Schneidemaschine Gourmetmaxx
- Schneidemaschine CaterChef
- Schneidemaschine Ridgid
- Schneidemaschine Zgonc
- Schneidemaschine Louis Tellier
- Schneidemaschine Nevir
- Schneidemaschine Globe
Neueste Bedienungsanleitung für -Kategorien-
10 August 2024
18 April 2024
11 April 2024
7 April 2024
4 April 2024
3 April 2024
29 März 2024
26 März 2024
21 März 2024
8 März 2024