Austrian Audio Hi-X25BT Bedienungsanleitung

Austrian Audio Kopfhörer Hi-X25BT

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Austrian Audio Hi-X25BT (8 Seiten) in der Kategorie Kopfhörer. Dieser Bedienungsanleitung war für 13 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF

Seite 1/8

Hi- Professional Wireless Bluetooth® Over- X25BT Ear Headphones

Owner’s Manual

Introduction and Safety I nstructions

The Hi- X25BT headphones require a Bluetooth®- compatible

device (e.g., personal computer, mobile phone etc.) to be

used in wireless mode. Using the included USB- -C® to USB C®

cable, you can also listen in digital audio mode and, using the

jack cable you can even listen in analogue audio mode. ,

Please read and follow the instructions in this manual before

using this product.

• Please do not operate t for its his product other than

intended use. Austrian Audio cannot accept any

liability for damages resulting from improper handling or misuse.

• Listening to personal stereo equipment at full volume for long periods can damage the user’s

hearing.

• Do not use if the product is defective.

• Always keep and operate the product in a dry and safe place.

• The product contains a lithium-polymer battery. Don’t expose it to excessive heat (do not

leave it in your car parked in the sun, do not throw it into fire and do not put it into the

microwave).

• Do not operate outside the intended operating temperature range: 0 °C to 45 °C (32 °F to

113 °F).

• Do not charge the product if it is too warm or too cold. Let it cool down or warm up to

approximately 20 °C to 30 °C (68 °F to 86 °F) before charging. Do not leave the product

unattended when plugged into the power source.

• Do not use this product in a wet or humid environment.

• Do not drop.

• The built- - in High Excursion drivers contain magnets.

• Please keep this product away from small children and persons who are not able to operate

professional audio equipment.

• If you need to clean the product, do this only with a soft dry cloth.

• Please do not use any third- . party accessories unless otherwise stated

• Do not disassemble the product, as there are no user-serviceable parts inside.

• Do not remove the sticker.

Thank you for reading the instructions and thank you very much for putting your trust in Austrian

Audio.

Operating the Hi- X25BT:

Power on/off

Press the on/off button on the bottom of the right earc p for 2 seconds until your u

Hi-X25BT welcomes you with a friendly “Power On” and the blue LED starts

blinking. If there is still an active connection, it will then automatically connect to

your by previously connected device and will confirm this indicating “Connected”

and the LED will change to glow continuously in blue.

To turn your headphones off, please press the on/off button for 3 seconds until your

Hi-X25BT turns off by indicating “Power Off” and the blue LED goes out.

Establish the Bluetooth®-connection

To establish a (new) connection, your headphones need to be turned off. Now

press the on/off button and continue pressing for 5 seconds. Your headphones

will turn on and automatically switch to the connecting mode, confirmed by

“Pairing” and a rapidly blinking blue LED.

Note: automaticallyIf you turn on your headphones for the first time, they will

switch to the pairing mode.

Note: If your headphones cannot find a connection to your connecting device (e.g., be

Bluetooth® is deactivated on your device), your headphones will turn off automaticall

some time.

Charging and istening to audio in digital audio model

Please use the included USB cable to charge your headphones. The

Bluetooth® , -connection will remain and you can continue using the Hi X25BT

while charging via USB cable.

If your Hi-X25BT is plugged in to a notebook for example, you can continue

to -listen to music via the plugged in USB cable while your headphones are

charging. To let your Hi-X25BT know that you want to switch from Bluetooth®

mode to digital audio mode, please press the on/off button briefly.

Note: Please note that the microphone is not available in USB digital audio mode.

If you want to change back from digital audio mode to Bluetooth® mode, simply press the

on/off button briefly again.

Listening to analogue audio mode

The analogue mode functions without using the battery, that’s why your

Hi-X25BT will turn off automatically when plugg the analogue jack ed into

cable. Now you need a device (e.g., a smartphone) that features a jack

output. To connect your Hi-X25BT to professional audio gear, you will also

find a 3.5 to 6.3 mm (1/8” to 1/4”) adapter enclosed.

Note: When in analogue audio mode the touch control functions on your

right ea are deactivated. You might notice considerable differences in volume between rcup

Bluetooth® and analogue audio mode.

Touch control functions

Your Hi-X25BT features capacitive controls on the right earcup to control the most popular

Bluetooth® functions.

• To turn the volume up, slide upwards on the guide groove.

• If you leave your finger on the sensor after sliding upwards,

- your Hi X25BT will continue turning up the volume until you

, release the groove or you have reached the maximum

volume level.

• To turn the volume down, slide downwards on the guide

groove.

• If you leave your finger on -the sensor after sliding downwards, your Hi X25BT will

continue turning down the volume until you release the groove or you have reached ,

the minimum volume level.

• If you want to start your voice assistant (if available and

® activated on your Bluetooth source), simultaneously

p lace multiple fingers on the control pad for more than

3 seconds.

Produktspezifikationen

Marke:	Austrian Audio
Kategorie:	Kopfhörer
Modell:	Hi-X25BT

Brauchst du Hilfe?

Wenn Sie Hilfe mit Austrian Audio Hi-X25BT benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten

Ihren Namen*

Deine E-Mail*

Schreiben Sie hier Ihre Frage

Bedienungsanleitung Kopfhörer Austrian Audio

Austrian Audio HI-X55 Bedienungsanleitung

26 Januar 2024

Austrian Audio Hi-X25BT Bedienungsanleitung

26 Januar 2024

Austrian Audio HI-X50 Bedienungsanleitung

26 Januar 2024

Austrian Audio Hi-X65 Bedienungsanleitung

26 Januar 2024

Austrian Audio Hi-X15 Bedienungsanleitung

17 Oktober 2022

Bedienungsanleitung Kopfhörer

Neueste Bedienungsanleitung für -Kategorien-

AKG K920 AFC Bedienungsanleitung

16 Oktober 2024

GoGEN HBTM 41WR Bedienungsanleitung

16 Oktober 2024

Nedis HPBT2102BK Bedienungsanleitung

15 Oktober 2024

AKG Y600NC Bedienungsanleitung

15 Oktober 2024

Vakoss MH954 Bedienungsanleitung

14 Oktober 2024

Skullcandy Cassette Bedienungsanleitung

14 Oktober 2024

Audio-Technica ATH-ANC29 Bedienungsanleitung

14 Oktober 2024

Daewoo AVS1421 Bedienungsanleitung

14 Oktober 2024

Vakoss MH942 Bedienungsanleitung

14 Oktober 2024

Philips SHB7150 Bedienungsanleitung

13 Oktober 2024