7inova 7W230 Bedienungsanleitung
7inova
Wifi Repeater
7W230
Lesen Sie kostenlos die π deutsche Bedienungsanleitung fΓΌr 7inova 7W230 (2 Seiten) in der Kategorie Wifi Repeater. Dieser Bedienungsanleitung war fΓΌr 8 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet
Seite 1/2
Before you start to use this device, please check if thereβs anything
missing in the package, and contact your dealer of purchase to
claim for missing items:
Package Contents:
1x 7W230 WiFi Repeater
1x 1m Ethernet cable with RJ45 connector
1x Quick Installation Guide
Wireless Ceiling Mount Access Point 300M
Quick Installation Guide
Model 7W230οΌ
LED indicatorsβ Status Description:
WPS/Reset
WLAN LED
Ethernet LED
Power LED
Cautions:
1. Disconnect the device in thunderstorms in case of lightning damage.
2. Keep far from heat source and ensure ventilation.
3. Keep waterproof in the storage, transportation and operating environment.
Indicator Name
Power Status Indicator Green On Get Powered
Status Description
Ethernet Status Indicator
Green fast blink
Green On
Data Transmission via Ethernet
Ethernet Connected
Wireless Status Indicator
Green slow blink Wireless Function Launched
Green fast blink Data Transmission via wireless
LAN
Reset: If need to reset the Repeater, press and hold RESET button for 3-5
seconds, release until all other LED are off except Power LED.
Note: Please check whether the WiFi-Repeater accord with factory default
settings once you canβt download http://192.168.2.1. If you are still not sure
what reasons, you can reset the WiFi-Repeater, just need to press the reset
button for 3-5 seconds, then try again.
Appearance Introduction
1 Computer Configuration
3 Configuration Mode
2 Connect To Wireless Network
1.1 Click βStartβControl PanelβNetwork and InternetβNetwork and Sharing
CenterβChange adapter settingsβWi-Fi(right click)βPropertiesβ
3.1.1 Follow process 2.3 to 2.5.
3.1.2 Select β β and enter the information what you want to set up wireless AP
information and password, then click β β, wait for 3~5 seconds it complete.Apply
3.1 Configure AP Mode
3.2.1 Follow process 2.3 to 2.5.
3.2.2 Select β β then click on β β.Repeater Search
3.2.3 Select wireless which you want to connect and enter the password (if wireless donβt
have password is βNoneβ), then enter the wireless information what you want to set.
3.2.4 Then click β β and wait for 3~5 seconds it is complete.Apply
3.2 Configure Repeater Mode
3.3.1 Follow process 2.3 to 2.5
3.3.2 Select β β then click on β βClient Search
3.3 Configure Client Mode
2.6 After logging in click β β and then click β β, you Easy Mode Network Setting
will see 3 modes: AP Mode, Repeater Mode and Client Mode
2.1 Pulg the Wi-Fi Repeater to a wall socket.
2.2 Click on the network icon( ) on the right
bottom of your desktop. You will find the signal
from the Wi-Fi Repeater. Click on β β Connect
and wait for a few seconds.
2.3 Connect to a Network Connect to the When shows: β β, please click β
network without setting it upβ
2.5 The login screen below will appear. Enter the β β and βUsername Passwordβ
then click β β to login. The default Username is β β and PasswordLogin admin
is β β.admin
2.4 Open web browser and type http://192.168.2.1 in the browserβs address
box. This number is the default IP address for this devices.
1.2 Double click βInternet Protocol Version 4(TCP/IPv4)β
1.3 To set up the computer IP 192.168.2.x (x arbitrary integer between 2~252),
subnet mask of 255.255.255.0, Click β β. Back to the last interface and OK
click β βOK
01 Wireless-N Repeater Wireless-N Repeater Wireless-N Repeater02 03
05 Wireless-N Repeater04 Wireless-N Repeater Wireless-N Repeater Wireless-N Repeater06 07
1) Restore the 7W230βs configuration to its factory default settings.
(With 7W230 powered on, use a pin to press and hold the Reset
button for about 3-5 seconds before releasing it).
2) To log in the Web Management page, use the default user name and
password: admin, admin. To connect to the Wireless Network, use
the default password on the label.
3) Try to configure 7W230 once again by following the instructions in
the previous steps of the QIG.
What can I do if I forgot my password?
Appendix: Troubleshooting
3.3.3 Select wireless which you want to connect and enter the password (if
wireless donβt have password is βNoneβ)
3.3.4 Then click β β and wait for 3~5 seconds it is complete.Apply
5.2 Wireless Security Configuration
4 Reconnect to Repeater
4.1 Click βStartβControl PanelβNetwork and InternetβNetwork and Sharing
CenterβChange adapter settingsβWi-Fi(right click)βPropertiesβ
5 Configuring via Web Browser
5.1 Wireless Base Configuration
4.2 Double click βInternet Protocol Version 4(TCP/IPv4)β
4.3 Select β β and βObtain an IP address automatically Obtain DSN
server address automaticallyβ. Click βOKβ. Back to the last
interface and click βOKβ
4.4 3 Configuration ModeSelect the wireless network name configured in β β ,
click β β button.Connect
4.5 If you encrypted wireless network in β β, the following 3 Configuration Mode
message will be displayed on web browser, fill in password, click βOKβ
Please click βAdvanced Mode β Wireless Settings β Wireless Basic
Settingsβ located at the web management interface, the following
message will be displayed on your web browser:
You could configure the minimum number of Wireless settings for
communication, such as SSID and Channel. The Access Point can be set
simply with only the minimum setting items. Please click βAdvanced Mode β Wireless Settings β Wireless Security
Settingsβ located at the web management interface, the following message
will be displayed on your web browser:
Setup the wireless security and encryption to prevent from unauthorized
access and monitoring. Supports 64/128-bit WEP, WPA-Personal, WPA2-
Personal encryption methods
5.3 Change Management password
Default password of Wireless Repeater is β β, and itβs displayed on admin
the login prompt when accessed from web browser. Thereβs a security risk
you donβt change the default password, since everyone can see it. This is
very important when you have wireless function enabled.
To change password, please follow the following instruction:
Please click βAdvanced Mode β System Tools β User Password Changeβ
menu on the web management interface, the following message will be
displayed on your web browser:
5.4 Firmware Upgrade
The system software used by this repeater is called as β β, just like firmware
any applications on your computer, when you replace the old application
with a new one, your computer will be equipped with new function. You
can also use this firmware upgrade function to add new functions to your
repeater, even fix the bugs of this repeater.
Please click βAdvanced Mode β System Tools β System Upgradeβ
located at the located at the web management interface, then the
following message will be displayed on your web browser.
5.5 Settings Backup and Restore, Factory Default
You can backup all Setting of this repeater to a file, so you can make
several copied of repeater configuration for security reason.
To backup or restore repeater setting, please follow the following instruction:
Please click βAdvanced Mode β System Tools β Backup and Recoveryβ
and βAdvanced Mode β System Tools β Restore Factory Settingsβ
located at the web management interface, then the following message will
be displayed on your web browser:
If you want to keep original password unchanged, click β β.Cancel
Click β β button, the WiFi Repeater will become effectiveSave
Click β β button, the WiFi Repeater will become effective.Apply
Click βBrowseβ button first, youβll be prompted to provide the filename of
firmware upgrade file. Please download the latest firmware file from our
website, and use it to upgrade your repeater.
After a firmware upgrade file is selected, click β β button, and the Upgrade
repeater will start firmware upgrade procedure automatically.
The procedure may take several minutes, please be patient.
Wireless Mode
Channel
SSID Broadcast
Supports 11b/g/n mixed modes
Wireless Signal On/Off
6(default)
Wireless Status
SSID
Wireless On/Off
Main Service Set Identifier.
Itβs the βnameβ of your wireless network.
Back up
Browse
Restore All Settings
Press βBack upβ button, you can please save it as another
filename for different versions, and keep it in a safe place.
Press βBrowseβ to pick a previously-saved configuration file
from your computer, and the click βSaveβ. After the replaced
by the file you just uploaded.
Click βRestore All Settingsβ button to remove all settings
Note: Never interrupt the upgrade procedure by closing the web browser or physically
disconnect your computer from repeater. If the firmware you upgrade is corrupt, the
firmware upgrade will fail, and you may have to return this repeater to the dealer of
purchase to ask for help. (Warranty voids if you interrupted the upgrade procedure).
Click β β and β β button. The repeater will restart.Save Restore All Settings
09 Wireless-N Repeater08 Wireless-N Repeater Wireless-N Repeater Wireless-N Repeater10 11
13 Wireless-N Repeater12 Wireless-N Repeater Wireless-N Repeater Wireless-N Repeater14 15
300Mbps Wireless Repeater
FW RVE: 7R152_V1.0
Browse
Browse
Click β β button, the WiFi Repeater will become effective.Apply
Produktspezifikationen
Marke: | 7inova |
Kategorie: | Wifi Repeater |
Modell: | 7W230 |
Brauchst du Hilfe?
Wenn Sie Hilfe mit 7inova 7W230 benΓΆtigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten
Bedienungsanleitung Wifi Repeater 7inova
15 August 2024
15 August 2024
15 August 2024
15 August 2024
Bedienungsanleitung Wifi Repeater
- Wifi Repeater Asus
- Wifi Repeater Gembird
- Wifi Repeater Hama
- Wifi Repeater LogiLink
- Wifi Repeater Manhattan
- Wifi Repeater Maxxter
- Wifi Repeater Medion
- Wifi Repeater SilverCrest
- Wifi Repeater ZyXEL
- Wifi Repeater Essentiel B
- Wifi Repeater Allnet
- Wifi Repeater CSL
- Wifi Repeater Devolo
- Wifi Repeater Eminent
- Wifi Repeater Linksys
- Wifi Repeater Maginon
- Wifi Repeater Netgear
- Wifi Repeater Renkforce
- Wifi Repeater Aukey
- Wifi Repeater Topcom
- Wifi Repeater Strong
- Wifi Repeater Lindy
- Wifi Repeater Mercusys
- Wifi Repeater TRENDnet
- Wifi Repeater Western Digital
- Wifi Repeater AVM
- Wifi Repeater TP-Link
- Wifi Repeater Black Box
- Wifi Repeater Vision
- Wifi Repeater Huawei
- Wifi Repeater Edimax
- Wifi Repeater Optex
- Wifi Repeater Totolink
- Wifi Repeater D-Link
- Wifi Repeater Vodafone
- Wifi Repeater Digitus
- Wifi Repeater LevelOne
- Wifi Repeater Cisco
- Wifi Repeater Tenda
- Wifi Repeater Ubiquiti Networks
- Wifi Repeater Intellinet
- Wifi Repeater Fluke
- Wifi Repeater Hikvision
- Wifi Repeater Nexxt
- Wifi Repeater Planet
- Wifi Repeater Mikrotik
- Wifi Repeater Google
- Wifi Repeater Comtrend
- Wifi Repeater Digi
- Wifi Repeater Funkwerk
- Wifi Repeater Sitecom
- Wifi Repeater Steren
- Wifi Repeater Universal Remote Control
- Wifi Repeater Wolfgang
- Wifi Repeater Cudy
- Wifi Repeater Siig
- Wifi Repeater Atto
- Wifi Repeater Paxton
- Wifi Repeater StarTech.com
- Wifi Repeater Smart-AVI
- Wifi Repeater Dahua Technology
- Wifi Repeater Speco Technologies
- Wifi Repeater Gefen
- Wifi Repeater Heatit
- Wifi Repeater ATen
- Wifi Repeater SilverNet
- Wifi Repeater Axis
- Wifi Repeater Crestron
- Wifi Repeater Extron
- Wifi Repeater Atlona
- Wifi Repeater Tycon Systems
- Wifi Repeater Silex
- Wifi Repeater Barox
- Wifi Repeater ALC
- Wifi Repeater Sabrent
- Wifi Repeater DTRONIC
- Wifi Repeater HELGI
- Wifi Repeater Amped Wireless
- Wifi Repeater Ruckus Wireless
- Wifi Repeater Heden
Neueste Bedienungsanleitung fΓΌr -Kategorien-
18 September 2024
13 September 2024
13 September 2024
11 September 2024
8 September 2024
6 September 2024
6 September 2024
6 September 2024
6 September 2024
6 September 2024