7inova 7W225 Bedienungsanleitung


Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für 7inova 7W225 (2 Seiten) in der Kategorie WLAN-Repeater. Dieser Bedienungsanleitung war für 17 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/2
300Mbps Wireless Ceiling Mount Access Point
Quick Installation Guide
Model: 7W225
Package Contents:
The device’s interface description
Power supply mode
Before you start to use this device, please check if there’s anything missing in the
package, and contact your dealer of purchase to claim for missing items:
This manual suit for quick installation of indoor 300m 11N wireless AP & High Power Router.
This manual will instruct you how to configure and manage this 7W225 indoor 300m 11N
wireless AP & High Power Router in right ways.
Gatewy:
WAN/LAN Connection, from
internet to user
AP:
Conversion from Wired
networking to Wireless
networking
Repeater/WDS:
Bridge the Wireless
networking via two or more
APs, to booster the wi-fi signal
and extend Range
WISP:
Wireless Access, Wireless out
or LAN out, DHCP Enable
1. DC power supply: the DC’s electronic standard is 12V/1A, connection diagram as follow:
2. Powered over Ethernet: Connect device’s WAN/LAN Port with PoE adapter by LAN Cable (Both
LAN port and WAN port support the 12V/24V PoE.)
3. When powered by 24V/1A PoE, this ceiling AP 7W225 can be PSE power supply for another
7W225 from Wan port or Lan port
Attention: line 4,5 must be positive electrode, Line 7,8 must be negative electrode in RJ45
Port.Just as the picture shows below, Device As WAN port connect with 24V/1A PoE Power
Adapter, then As LAN port supply 12V/1A power for B.
1st .Connection and power supply
2nd.login and launch
Wrong connection or unauthorized power adapter may damage the device.
If you computer include 802.11b/g/n functions but cannot find wireless connection,please
contact the after-sell departement of your computer supplier when in those situation.
1)Right click“network neighborhood”and chose "attribute" no wireless connection exist.
2)Wireless connection existed, Right click it and chose "attribute",there are "normal" and
"advance" in the menu,but no "wireless network configuration" exist.
3)Other computer or wireless device connection is normal.
1x Ceiling AP
1x DC 24V 1000mA POE adapter
1x auxiliary tools for installation
1x Quick installation guide manual
1x Quality certificate
1x Warranty Card
Working mode Description
Wire connect
Wireless connection
1)connect 7W225 device and computer by Wired/Wireless
2)Get the IP address automatically or manually configure
A. manually configure
configure local IP address as 192.168.0.x(X can be selected from 2-254) the same network
segment as 7W225 subnet mask 255.255.255.0 As P2 and P3 shows., ,
After basic configuration, if you want use wireless internet,you can configure computer wireless
connection as local connection settings mentioned above. Right click "wireless network
configuration",chose "check available wireless connection",find the connecting name"7W225" the
default Passwords is"66666666"
P2 IP configuration of computer network
P4 IP Address setting
P 5 Wireless Connection
P1 7W225`s Interface
P3 IP configuration of computer network card
LAN Setting
3) Log in the CPE: Open your web browser, type
192.168.0.1 in the address bar, enter the User
name/Passwords: preset as admin/admin, then
you can found on the label attached to the router,
click OK
Enter into the page of WEB software management page, then set the ceiling AP as requirement. The
default working mode is Gateway, but we take Repeater for example to show how to select the right
working mode. Click Wizard, then select the Operation modem, then next to enter into another page.
● Basic Setting: configure the SSID, Channel, passwords if require, like P13
● Setting Finish: Click Finish after configure all the data, pop up a window and ask whether
continue to changing even the 7W225 will reboot. Choose OK to continue and waiting system
reboot.
● Checking Status: After reboot, the working mode of 7W225 Ceiling AP is Repeater. Our PC and
other wireless device can access to and get Ethernet from the top end AP or router by 7W225 in
Repeater Mode. The user should change PC’s IP address to one from 192.168.0.2~254, then can
access to 7W225 and checking the status.
After checking the status successful, we finished the Repeater working mode setting.
For other mode, can be configured and setted similiar like WDS.
Click Management to enter into the management page as follow P15
Set Working Mode: Select Repeater Mode in P8, click Next
LAN IP Address Setting: Fill in the IP Address we need, it will show like P9 after configure
DHCP Server: DHCP Server is unable in default under Repeater mode, click Next to continue
● Connect with Wireless AP: Click Search Wireless AP in page P10, then choose the right wireless
AP in P11. Then input the right passwords and click Next to continue in P12
3nd steps: Operation mode setting
Management
Trouble Shooting
● System: export the default data, or load the new configure file to restore the AP’s system, or
reboot to default setting.
● Manager: set the the manager and passwords for 7W225
● Log: Log Enable or disable, or view the system log from here
● Firmware upgrade: Upgrade new firmware to access stable function
P9 LAN Setting
P10 Scan AP
P11 AP List after scan
P12 Passwords input
P7 Wizard Page
P8 Operation mode select
P13 Basic Setting
P14 Change the working mode
P15 Management Page
P6 User name and passwords input
Form 1 Symptoms and Treatment
Forget the login user name and
passwords
Forget the AP’s SSID and
passwords
Restore to factory default
Restore to factory default
Can’t access to AP’s IP address
1. Check the AP’s DHCP and make it enable in Gateway mode and WISP mode
2. Check the connection between 7W225 and the top networking in AP and
Repeater mode
No Power indicator 1. If DC Power, check the local power supplier
2. If PoE Power, check the PoE adapter and Internet cable
1Pls make sure the PC and 7W225’s IP Address are in same network
segment, can be checked through Ping: PC start--input CMD in Run,
then ping 192.168.0.1
2 Login after Restore 7W225 to factory default
3Make sure there isn’t any equipment take IP address of 192.168.0.1 in
7W225 networking
4Check your computer and network cable to avoid any problem,
recommend to use unshielded twisted pair 10/100M Ethernet cable.
Can’t login 7W225 through WEB
management
Symptoms Treatment
The 7W225 can restore to factory default by press the Reset button last more than 10
seconds. Then 7W225 will restore to factory default setting after WiFi LED flash off and
System reboot.


Produktspezifikationen

Marke: 7inova
Kategorie: WLAN-Repeater
Modell: 7W225

Brauchst du Hilfe?

Wenn Sie Hilfe mit 7inova 7W225 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung WLAN-Repeater 7inova

Bedienungsanleitung WLAN-Repeater

Neueste Bedienungsanleitung für -Kategorien-