Worx WX696L.9 Bedienungsanleitung
Lesen Sie kostenlos die š deutsche Bedienungsanleitung fĆ¼r Worx WX696L.9 (32 Seiten) in der Kategorie Multitool. Dieser Bedienungsanleitung war fĆ¼r 30 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet
Seite 1/32
20V Cordless Oscillating Tool EN
Outil sans ļ¬l Ć action oscillante 20V F
Herramienta oscilante inalƔmbrica de 20V ES
P02
P13
P22
2
WARNING: Some dust created by power
sanding, sawing, grinding, drilling
and other construct ion activit ies contains
chemicals known to the State of California
to cause cancer, birth defects or other
reproductive harm. Some examples of these
chemicals are:
ā¢ Lead from lead-based pain ts;
ā¢ Crystalline silica from bricks and cement
and other masonry products;
ā¢ Arsenic and chromium from chemically-
treated lumber.
Your risk from these exposures varies,
depending on how often you do this type
of work. To reduce your exposure to these
chemicals: work in a well ventilated area,
and work wit h approved safety equipment,
such as those dust masks that are specially
designed to ļ¬lt er out microscopic particles.
WARNING: This product can expose
you to chemicals including lead and
Di(2-ethylhexyl)phthalate (DEHP) which
are known to the State of California to
cause cancer and birth defects or other
reproductive harm. For more information go
to www.P65Warnings.ca.gov.
WARNING Read all safety warnings,
instructions, illustrations and
speciļ¬cations provided with this power tool.
Failure to follow all instructions listed below may
result in electric shock, ļ¬re and/or serious injury.
Save all warnings and instructions for future
reference.
The term āpower toolā in the warnings refers to your
mains-operated (corded) power tool or battery-
operated (cordless) power tool.
1) Work area safety
a) Keep work area clean and well lit.
Cluttered or dark areas invite accidents.
b) Do not operate power tools in explosive
atmospheres, such as in the presence of
ļ¬ammable liquids, gases or dust. Power
tools create sparks which may ignite the dust or
fumes.
c) Keep children and bystanders away while
operating a power tool. Distractions can
cause you to lose control.
2) Electrical safety
a) Power tool plugs must match the outlet.
Never modify the plug in any way. Do
not use any adapter plugs with earthed
(grounded) power tools. Unmodiļ¬ed plugs
and matching outlets will reduce risk of electric
shock.
b) Avoid body contact with earthed or
grounded surfaces, such as pipes,
radiators, ranges and refrigerators. There
is an increased risk of electric shock if your
body is earthed or grounded.
c) Do not expose power tools to rain or wet
conditions. Water entering a power tool will
increase the risk of electric shock.
d) Do not abuse the cord. Never use the
cord for carrying, pulling or unplugging
the power tool. Keep cord away from
heat, oil, sharp edges or moving part s.
Damaged or entangled cords increase the risk
of electric shock.
e) When operat ing a power tool outdoors,
use an extension cord suitable for
outdoor use. Use of a cord suitable for
outdoor use reduces the risk of electric shock.
f) If operating a power tool in a damp
location is unavoidable, use a residual
current device (RCD) protected supply.
Use of an RCD reduces the risk of electric shock.
3) Personal safety
a) Stay alert, watch what you are doing and
use common sense when operating a
power tool. Do not use a power tool while
you are tired or under the inļ¬uence of
drugs, alcohol or medication. A moment
of inattention while operating power tools may
result in serious personal injury.
b) Use personal protective equipment.
Always wear eye protection. Protective
equipment such as dust mask, non-skid safety
shoes, hard hat, or hearing protection used for
appropriate conditions will reduce personal
injuries.
c) Prevent unintentional starting. Ensure
the switch is in the off-position before
connecting to power source and/or
batt ery pack, picking up or carrying the
tool. Carrying power tools with your ļ¬nger on
the switch or energising power tools that have
the switch on invites accidents.
d) Remove any adjusting key or wrench
before turning the power tool on. A
wrench or a key left attached to a rotating part
of the power tool may result in personal injury.
e) Do not overreach. Keep proper footing
and balance at all times. This enables
better control of the power tool in unexpected
situations.
f) Dress properly. Do not wear loose
clothing or jewelry. Keep your hair and
clothing away from moving parts. Loose
clothes, jewelry or long hair can be caught in
moving parts.
g) If devices are provided for the connection
of dust extraction and collection
facilities, ensure these are connected and
properly used. Use of dust collection can
reduce dust-related hazards.
3
h) Do not let familiarity gained from
frequent use of tools allow you to become
complacent and ignore tool safety
principles. A careless action can cause severe
injury within a fraction of a second.
4) Power tool use and care
a) Do not force the power tool. Use the
correct power tool for your application.
The correct power tool will do the job better
and safer at the rate for which it was designed.
b) Do not use the power tool if the switch
does not turn it on and off. Any power tool
that cannot be controlled with the switch is
dangerous and must be repaired.
c) Disconnect the plug from the power
source and/or remove the battery pack,
if detachable, from the power tool before
making any adjustments, changing
accessories, or storing power tools. Such
preventive safety measures reduce the risk of
starting the power tool accidentally.
d) Store idle power tools out of the reach
of children and do not allow persons
unfamiliar with the power tool or these
instructions to operate the power tool.
Power tools are dangerous in the hands of
untrained users.
e) Maintain power tools and accessories.
Check for misalignment or binding of
moving parts, breakage of parts and any
other condition that may affect the power
toolās operation. If damaged, have the
power tool repaired before use. Many
accidents are caused by poorly maintained
power tools.
f) Keep cutting tools sharp and clean.
Properly maintained cutting tools with sharp
cutting edges are less likely to bind and are
easier to control.
g) Use the power tool, accessories and
tool bits etc. in accordance with these
instructions, taking into account the
working conditions and the work to
be performed. Use of the power tool for
operations different from those intended could
result in a hazardous situation.
h) Keep handles and grasping surfaces
dry, clean and free from oil and grease.
Slippery handles and grasping surfaces do not
allow for safe handling and control of the tool in
unexpected situations.
5) Battery tool use and care
a) Recharge only with the charger speciļ¬ed
by the manufacturer. A charger that is
suitable for one type of battery pack may create
a risk of ļ¬re when used with another battery
pack.
b) Use power tools only with speciļ¬cally
designated battery packs. Use of any other
battery packs may create a risk of injury and
ļ¬re.
c) When battery pack is not in use, keep it
away from other metal objects, like paper
clips, coins, keys, nails, screws or other
small metal objects, that can make a
connection from one terminal to another.
Shorting the battery terminals together may
cause burns or a ļ¬re.
d) Under abusive conditions, liquid may be
ejected from the battery; avoid contact.
If contact accidentally occurs, ļ¬ush with
water. If liquid contacts eyes, additionally
seek medical help. Liquid ejected from the
battery may cause irritation or burns.
e) Do not use a battery pack or tool that is
damaged or modiļ¬ed. Damaged or modiļ¬ed
batteries may exhibit unpredictable behavior
resulting in ļ¬re, explosion or risk of injury.
f) Do not expose a battery pack or tool to
ļ¬re or excessive temperature. Exposure
to ļ¬re or temperature above (266 Ā° F) (130 Ā°C )
may cause explosion.
g) Follow all charging instructions and
do not charge the battery pack or tool
outside the temperature range speciļ¬ed
in the instructions. Charging improperly or
at temperatures outside the speciļ¬ed range
may damage the battery and increase the risk
of ļ¬re.
6) Service
a) Have your power tool serviced by
a qualiļ¬ed repair person using only
identical replacement parts. This will
ensure that the safety of the power tool is
maintained.
b) Never service damaged battery packs.
Service of battery packs should only be
performed by the manufacturer or authorized
service providers.
1. Hold the power tool by insulated gripping
surfaces, when performing an operation
where the cutting accessory may contact
hidden wiring . Cutting accessory contacting
a āliveā wire may make exposed metal parts
of the power tool āliveā and could give the
operator an electric shock.
2. Use clamps or another practical way to
secure and support the workpiece to a
stable platform. Holding the work by hand or
against your body leaves it unstable and may
lead to loss of control.
a) Do not dismantle, open or shred battery
pack.
b) Do not expose battery pack to heat or
Produktspezifikationen
| Marke: | Worx |
| Kategorie: | Multitool |
| Modell: | WX696L.9 |
Brauchst du Hilfe?
Wenn Sie Hilfe mit Worx WX696L.9 benƶtigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten
Bedienungsanleitung Multitool Worx
4 Oktober 2024
16 August 2024
4 August 2024
31 Juli 2024
29 Juli 2024
21 Juli 2024
17 Juli 2024
14 Juli 2024
13 Juli 2024
9 Juli 2024
Bedienungsanleitung Multitool
- Multitool SKS
- Multitool Cotech
- Multitool Makita
- Multitool Bosch
- Multitool Parkside
- Multitool Vonroc
- Multitool AEG
- Multitool Powerfix
- Multitool Black And Decker
- Multitool Cocraft
- Multitool FERM
- Multitool Ryobi
- Multitool Skil
- Multitool Topcraft
- Multitool Trotec
- Multitool Rocktrail
- Multitool Hilti
- Multitool DeWalt
- Multitool Einhell
- Multitool Kress
- Multitool Metabo
- Multitool GĆ¼de
- Multitool Meec Tools
- Multitool Dremel
- Multitool Fieldmann
- Multitool Proxxon
- Multitool Westfalia
- Multitool Graphite
- Multitool Leatherman
- Multitool Silverline
- Multitool Stiga
- Multitool Milwaukee
- Multitool Fein
- Multitool Craftsman
- Multitool Powerplus
- Multitool Ozito
- Multitool Extech
- Multitool VARO
- Multitool Gamma
- Multitool Renovator
- Multitool G-Technology
- Multitool MTM
- Multitool CMT Orange Tools
Neueste Bedienungsanleitung fĆ¼r -Kategorien-
15 Oktober 2024
14 Oktober 2024
9 Oktober 2024
8 Oktober 2024
29 September 2024
21 September 2024
12 September 2024
11 September 2024
9 September 2024
6 September 2024