Makita TM3010CK Bedienungsanleitung
Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Makita TM3010CK (12 Seiten) in der Kategorie Multitool. Dieser Bedienungsanleitung war für 14 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet
Seite 1/12
1
ENGLISH (Original instructions)
INSTRUCTION MANUAL
DOUBLE INSULATION
IMPORTANT: Read Before Using.
Multi Tool
TM3010C
013851
2
ENGLISH (Original instructions)
SPECIFICATIONS
Model TM3010C
Oscillation per minute 6,000 - 20,000 (min
-1)
Oscillation angle, left/right 1.6 ﾟ (3.2 ﾟ total)
Overall length 283 mm
without dust extraction attachment
1.6 kg
Net weight
with dust extraction attachment
1.7 kg
Safety class /II
• Due to our continuing program of research and development, the specifications herein are subject to change without notice.
• Specifications may differ from country to country.
• Weight according to EPTA-Procedure 01/2003
END201-7
Symbols
The following show the symbols used for the equipment.
Be sure that you understand their meaning before use.
ï½¥ Read instruction manual.
ï½¥ DOUBLE INSULATION
ï½¥ Only for EU countries
Do not dispose of electric equipment
together with household waste
material!
In observance of the European
Directive, on Waste Electric and
Electronic Equipment and its
implementation in accordance with
national law, electric equipment that
have reached the end of their life must
be collected separately and returned to
an environmentally compatible
recycling facility.
ENE080-1
Intended use
The tool is intended for sawing and cutting wood, plastic,
gypsum, non-ferrous metals, and fastening elements (e.
g. unhardened nails and staples). It is also intended for
working soft wall tiles, as well as dry sanding and
scraping of small surfaces. It is especially for working
close to edge and flush cutting.
ENG905-1
Noise
The typical A-weighted noise level determined
according to EN60745:
Work mode: Sanding
Sound pressure level (L
pA) : 80 dB (A)
Uncertainty (K) : 3 dB (A)
The noise level under working may exceed 80 dB (A).
Work mode: Cutting with plunge cut saw blade
Sound pressure level (L
pA) : 80 dB (A)
Uncertainty (K) : 3 dB (A)
The noise level under working may exceed 80 dB (A).
Work mode: Cutting with segment saw blade
Sound pressure level (L
pA) : 79 dB (A)
Uncertainty (K) : 3 dB (A)
The noise level under working may exceed 80 dB (A).
Work mode: Scraping
Sound pressure level (L
pA) : 82 dB (A)
Uncertainty (K) : 3 dB (A)
The noise level under working may exceed 80 dB (A).
Wear ear protection
ENG900-1
Vibration
The vibration total value (tri-axial vector sum)
determined according to EN60745:
Work mode : sanding
Vibration emission (ah) : 2.5 m/s2 or less
Uncertainty (K) : 1.5 m/s2
Work mode : cutting with plunge cut saw blade
Vibration emission (ah) : 6.5 m/s2
Uncertainty (K) : 1.5 m/s2
Work mode : cutting with segment saw blade
Vibration emission (ah) : 2.5 m/s2
Uncertainty (K) : 1.5 m/s2
Work mode : scraping
Vibration emission (ah) : 5.0 m/s2
Uncertainty (K) : 1.5 m/s2
3
ENG901-1
• The declared vibration emission value has been
measured in accordance with the standard test
method and may be used for comparing one tool
with another.
• The declared vibration emission value may also be
used in a preliminary assessment of exposure.
WARNING:
• The vibration emission during actual use of the
power tool can differ from the declared emission
value depending on the ways in which the tool is
used.
• Be sure to identify safety measures to protect the
operator that are based on an estimation of
exposure in the actual conditions of use (taking
account of all parts of the operating cycle such as
the times when the tool is switched off and when it
is running idle in addition to the trigger time).
ENH101-17
For European countries only
EC Declaration of Conformity
Makita declares that the following Machine(s):
Designation of Machine:
Multi Tool
Model No./ Type: TM3010C
Conforms to the following European Directives:
2006/42/EC
They are manufactured in accordance with the following
Standard or standardized documents:
EN60745
The Technical file in accordance with 2006/42/EC is
available from:
Makita, Jan-Baptist Vinkstraat 2, 3070, Belgium
31.12.2013
000331
Yasushi Fukaya
Director
Makita, Jan-Baptist Vinkstraat 2, 3070, Belgium
GEA005-3
General Power Tool Safety
Warnings
WARNING Read all safety warnings and all
instructions. Failure to follow the warnings and
instructions may result in electric shock, fire and/or
serious injury.
Save all warnings and
instructions for future reference.
The term "power tool" in the warnings refers to your
mains-operated (corded) power tool or battery-operated
(cordless) power tool.
Work area safety
1. Keep work area clean and well lit. Cluttered or
dark areas invite accidents.
2. Do not operate power tools in explosive
atmospheres, such as in the presence of
flammable liquids, gases or dust. Power tools
create sparks which may ignite the dust or fumes.
3. Keep children and bystanders away while
operating a power tool. Distractions can cause
you to lose control.
Electrical safety
4. Power tool plugs must match the outlet. Never
modify the plug in any way. Do not use any
adapter plugs with earthed (grounded) power
tools. Unmodified plugs and matching outlets will
reduce risk of electric shock.
5. Avoid body contact with earthed or grounded
surfaces such as pipes, radiators, ranges and
refrigerators. There is an increased risk of
electric shock if your body is earthed or grounded.
6. Do not expose power tools to rain or wet
conditions. Water entering a power tool will
increase the risk of electric shock.
7. Do not abuse the cord. Never use the cord for
carrying, pulling or unplugging the power tool.
Keep cord away from heat, oil, sharp edges or
moving parts. Damaged or entangled cords
increase the risk of electric shock.
8. When operating a power tool outdoors, use an
extension cord suitable for outdoor use. Use
of a cord suitable for outdoor use reduces the risk
of electric shock.
9. If operating a power tool in a damp location is
unavoidable, use a residual current device
(RCD) protected supply. Use of an RCD
reduces the risk of electric shock.
10. Use of power supply via a RCD with a rated
residual current of 30mA or less is always
recommended.
Produktspezifikationen
| Marke: | Makita |
| Kategorie: | Multitool |
| Modell: | TM3010CK |
Brauchst du Hilfe?
Wenn Sie Hilfe mit Makita TM3010CK benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten
Bedienungsanleitung Multitool Makita
9 Oktober 2024
29 September 2024
9 September 2024
3 September 2024
31 August 2024
30 August 2024
25 August 2024
16 August 2024
6 August 2024
5 August 2024
Bedienungsanleitung Multitool
- Multitool SKS
- Multitool Cotech
- Multitool Bosch
- Multitool Parkside
- Multitool Vonroc
- Multitool AEG
- Multitool Powerfix
- Multitool Black And Decker
- Multitool Cocraft
- Multitool FERM
- Multitool Ryobi
- Multitool Skil
- Multitool Topcraft
- Multitool Trotec
- Multitool Rocktrail
- Multitool Hilti
- Multitool DeWalt
- Multitool Einhell
- Multitool Worx
- Multitool Kress
- Multitool Metabo
- Multitool Güde
- Multitool Meec Tools
- Multitool Dremel
- Multitool Fieldmann
- Multitool Proxxon
- Multitool Westfalia
- Multitool Graphite
- Multitool Leatherman
- Multitool Silverline
- Multitool Stiga
- Multitool Milwaukee
- Multitool Fein
- Multitool Craftsman
- Multitool Powerplus
- Multitool Ozito
- Multitool Extech
- Multitool VARO
- Multitool Gamma
- Multitool Renovator
- Multitool G-Technology
- Multitool MTM
- Multitool CMT Orange Tools
Neueste Bedienungsanleitung für -Kategorien-
15 Oktober 2024
14 Oktober 2024
8 Oktober 2024
4 Oktober 2024
21 September 2024
12 September 2024
11 September 2024
6 September 2024
5 September 2024
5 September 2024