Wimberley M-7 Bedienungsanleitung


Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Wimberley M-7 (2 Seiten) in der Kategorie Nicht kategorisiert. Dieser Bedienungsanleitung war für 14 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/2
The M 7 Flash Flipper -is one of the components of
the Wimberley Modular Flash Bracket System. It is used in
conjunction with the Wimberley F 1 Telephoto Bracket to form -
a versatile, hand held flash bracket that allows you to easily -
keep your flash above the lens when switching from horizontal
(landscape) to vertical (portrait) orientation.
The M 7 module is a useful accessory for both wedding and -
portrait photography. The elevation of the flash unit above the
camera body reduces both red eye and distracting, unflattering -
shadows when photographing people.
Wimberley, Inc. - - - Phone: 1 434 529 8385
1750 Broadway St Toll Free: 1 2746 -888-665-(USA & Canada)
Charlottesville, VA
22902 USA www.tripodhead.com info@tripodhead.com
About the M 7-
Instructions continued on back >>
Wimberley, Inc. - - - Phone: 1 434 529 8385
1750 Broadway St Toll Free: 1 2746 -888-665-(USA & Canada)
Charlottesville, VA
22902 USA www.tripodhead.com info@tripodhead.com
5 Year Warranty – See www.tripodhead.com/warranty.cfm for complete details
Package Contents:
M 7 Module:- Flash Flipper (Qty 1)
Weight: 5.9 oz
Dimensions (Overall L x W x H): 6.5 x 0.8 X 0.5 in
Materials: Anodized 6061 Aluminum, stainless steel fasteners
M 7- Flash Flipper
Flash Bracket Module
Made in USA
Wimberley, Inc. ©2017, All Rights Reserved Rev. 170707
Thank you for your interest in Wimberley products. If you have any questions or comments please feel free to contact us.
Useful Tips:
The Flash Flipper can be used with the F 9 Wimberley Head Flash Bracket if you have an L bracket - -
by mounting the F 9 to the vertical side of the camera body plate. The F 9 bracket takes the place of - -
the F 1 and eliminates the need for the P 5 and M 8 components of the set up.- - -
Nikon SC 29 compatibility note:-
The Nikon SC 29 cord requires the use our Flash Cord Adapter (Sold -FA-11
separately) to attach the cord snugly to the bracket because the cord mount-
ing foot is slightly too wide to fit properly in the slot on the flash arm. Some
older Canon off camera flash cords have this same issue.-
The AP 7 cold shoe adapter can be used to mount the Speedlight flash unit to the flash bracket s mounting stud. -
The Nikon AS 20 can also be used. Contact us if you have trouble mounting your flash to the bracket.-
Attaching Your Flash Unit:
Wimberley Flash brackets have a mounting thumbscrew that attaches to an off camera hot shoe cable or a cold shoe adapter 1/4”-20 -
such as the Wimberley AP 7. We do not sell flash cords. Please follow camera and flash unit recommendations when purchasing -
flash cords to ensure proper signal transmission.
Use the thumbscrew on the top of the M 3 Tilt Arm module to attach the M- -7. Use the thumbscrew on the
M 7 to attach the hot shoe. Make sure the flash adapter seats snugly into the bottom notch of the Tilt Arm -
module. There should be no need to over tighten.-
M 3-
Thumbscrew
Thumbscrew
M 7-
M 9-
M 9-
L bracket- P 5-
Canon Off camera Shoe Cord- Wimberley AP 7 Cold Shoe- Nikon Off Camera Shoe Cord-


Produktspezifikationen

Marke: Wimberley
Kategorie: Nicht kategorisiert
Modell: M-7

Brauchst du Hilfe?

Wenn Sie Hilfe mit Wimberley M-7 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Nicht kategorisiert Wimberley

Bedienungsanleitung Nicht kategorisiert

Neueste Bedienungsanleitung für -Kategorien-