V-TAC VT-8141 Bedienungsanleitung

V-TAC Erleichterung VT-8141

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für V-TAC VT-8141 (1 Seiten) in der Kategorie Erleichterung. Dieser Bedienungsanleitung war für 4 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF
Seite 1/1
LED CABINET LIGHT
WITH PIR SENSOR
INSTALLATION INSTRUCTION
Caution, risk of electric shock.
This marking indicates that this
product should not be disposed
of with other household wastes.
PARTS OF ITEM
WARNING
• Please make sure to turn off the power before starting the installation.
• Installation must be performed by a qualified electrician.
• The light source of this luminaire is not replaceable, when the light source reaches its end of life
the whole luminaire should be replaced.
• Keep children away from this product or accessories.
• Do not use or store this product in a hot and humid place, or in a place with a lot of dust or oily
smoke.
• Avoid strong vibration, shock, or excessive force to this product.
• Do not disassemble, repair, process or modify this product. Also, do not use it for any other
purpose.
• When cleaning this product, do not use anything that contains volatile organic solvents such as
benzine and thinner.
• If the battery of the target device becomes hot or you feel something is wrong while charging, stop
using it immediately and contact us.
• When disposing of this product, follow the instructions of each local government and dispose of it
correctly.
• For indoor use only.
FEATURES
• The LED light with motion sensor detects the movement of a person entering the detection area
and automatically turns on the LED light and turns it off after a while.
(Motion sensing mode only takes effect at night or in a dark environment)
• Can be installed and used in closets, cabinets, kitchens, living rooms, entrances, etc.
SENSING ACCURACY
After receiving this product, please check whether the motion sensing mode is effective. Please turn the
switch to "AUTO" in a dark environment. After detecting human movement, the light will automatically light
up.
NOTE: that in daylight or in sufficient light In the case of, the motion sensing mode is invalid.
SENSING AREA
INTRODUCTION & WARRANTY
TECHNICAL DATA
2
YEARS
WARRANTY
*
Thank you for selecting and buying V-TAC product. V-TAC will serve you the best. Please read these
instructions carefully before starting the installation and keep this manual handy for future reference.
If you have any another query, please contact our dealer or local vendor from whom you have
purchased the product. They are trained and ready to serve you at the best. The warranty is valid for
2 years from the date of purchase. The warranty does not apply to damage caused by incorrect
installation or abnormal wear and tear. The company gives no warranty against damage to any
surface due to incorrect removal and installation of the product. The products are suitable for 10-12
Hours Daily operation. Usage of product for 24 Hours a day would void the warranty. This product is
warranted for manufacturing defects only.
NOTE:
• Please charge in time when the light is dimmed.
• The numerical value of the LED light lighting time is an actual measurement value. It may vary
depending on the usage environment.
CHARGING METHOD
• Please use an independent USB port or 5V/1A charger device first. If there is no such device,
you can connect this product to a personal computer. Please connect it when the personal
computer is turned on.
• Connect the a USB connector of the battery part to the USB port that can supply power.
Charging will start automatically and the indicator light on the sensor will glow red.
• When charging is complete, the indicator light will turns green.
1.Using The 3M buckle to absorb the built-in
magnet of the light.
* Please refrain from installing in a place where the surface is painted.
* 3M tape is hard to peel off once it is stuck, but once it is peeled off, the adhesive force will decrease,
please try to avoid secondary pasting.
* This product is not waterproof, please make sure to use it in a dry environment.
2. Tear off the 3M adhesive tape and stick the
lamp on the position where you want to install.
PRODUCT INFORMATION
IN CASE OF ANY QUERY/ISSUE WITH THE PRODUCT, PLEASE REACH OUT TO US AT: SUPPORT@V-TAC.EU
FOR MORE PRODUCTS RANGE, INQUIRY PLEASE CONTACT OUR DISTRIBUTOR OR NEAREST
DEALERS. V-TAC EUROPE LTD. BULGARIA, PLOVDIV 4000, BUL.L.KARAVELOW 9B
PB
Model VT-8141 VT-8142 VT-8143
Watts 1.5W 2W 2.5W
Lumens 110lm 160lm 260lm
Beam Angle 180° 180° 180°
Body Type Aluminum Aluminum Aluminum
Dimension 300*40*11mm 400*40*11mm 600*40*11mm
Battery LITHIUM 1500mA LITHIUM 2200mA LITHIUM 3000mA
Charging Time 4 Hours 7 Hours6Hours
Working Time 5~6 Hours 6~7 Hours 7~8 Hours
Sensor Mode PIR Sensor PIR Sensor PIR Sensor
Detection Angle 120° 120° 120°
Detection Distance 3M~5M 3M~5M 3M~5M
Delay Time 15s 15s 15s
Input Voltage DC: 5V, 1A DC: 5V, 1A DC: 5V, 1A
MULTI-LANGUAGE
MANUAL QR CODE
Please scan the QR code
to access the manual in
multiple languages.
DIY
WORK MODES

Produktspezifikationen

Marke: V-TAC
Kategorie: Erleichterung
Modell: VT-8141

Brauchst du Hilfe?

Wenn Sie Hilfe mit V-TAC VT-8141 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten


Bedienungsanleitung Erleichterung V-TAC

V-TAC

V-TAC VT-1253S Bedienungsanleitung

6 September 2024
V-TAC

V-TAC VT-1253 Bedienungsanleitung

6 September 2024
V-TAC

V-TAC VT-8613 Bedienungsanleitung

6 September 2024
V-TAC

V-TAC VT-8603 Bedienungsanleitung

6 September 2024
V-TAC

V-TAC VT-8-40 Bedienungsanleitung

6 September 2024
V-TAC

V-TAC VT-15021 Bedienungsanleitung

6 September 2024
V-TAC

V-TAC VT-12021 Bedienungsanleitung

6 September 2024
V-TAC

V-TAC VT-12020 Bedienungsanleitung

6 September 2024
V-TAC

V-TAC VT-16011 Bedienungsanleitung

6 September 2024
V-TAC

V-TAC VT-16010 Bedienungsanleitung

6 September 2024

Bedienungsanleitung Erleichterung

Neueste Bedienungsanleitung für -Kategorien-

Goobay

Goobay 30780 Bedienungsanleitung

16 Oktober 2024
AFX

AFX Grace GRCP07CBBK Bedienungsanleitung

13 Oktober 2024
AFX

AFX Point PNTP0107L30D1BK Bedienungsanleitung

13 Oktober 2024
Smartwares

Smartwares 20.003.54 Bedienungsanleitung

9 Oktober 2024
Neewer

Neewer TL97C Bedienungsanleitung

8 Oktober 2024
Neewer

Neewer SRP18C Bedienungsanleitung

8 Oktober 2024
Qtx

Qtx Moonglow Bedienungsanleitung

7 Oktober 2024
Blumfeldt

Blumfeldt Shinecube XL Bedienungsanleitung

7 Oktober 2024
Qtx

Qtx HPWash100 Bedienungsanleitung

6 Oktober 2024
BeamZ

BeamZ DJ X5 Bedienungsanleitung

5 Oktober 2024