V-TAC VT-5102 Bedienungsanleitung

V-TAC Smarth-Startseite VT-5102

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für V-TAC VT-5102 (10 Seiten) in der Kategorie Smarth-Startseite. Dieser Bedienungsanleitung war für 7 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF
Seite 1/10
MODEL VT-5101 VT-5102
SKU 23604 23605
SWITCH TYPE 1 Gang 2 Gang
MAX LOAD 10A 5A & 5A
INPUT VOLTAGE AC: 100-240V, 50/60Hz
OUTPUT VOLTAGE AC: 100-240V, 50/60Hz
FOR LED LIGHT 150W (Max)
Wi-Fi IEEE 802.11 b/g/n 2.4Ghz
Wi-Fi SECURITY WEP 61/WEP 128/TKIP/
CCMP (AES)
WIRELESS
CONSUMING 0.5W
OPERATING
TEMPERATURE -20°C to +60°C
In case of any query/issue with the product, please reach out to us at: support@v-tac.eu
For More products range, inquiry please contact our distributor or nearest dealers.
V-TAC EUROPE LTD. Bulgaria, Plovdiv 4000, bul.L.Karavelow 9B
MULTI-LANGUAGE
MANUAL QR CODE
Please scan the QR code
to access the manual
in multiple languages.
INSTRUCTION MANUAL
WIFI SMART SWITCH
INTRODUCTION & WARRANTY
Thank you for selecting and buying V-TAC product. V-TAC will serve you the best. Please read these instructions
carefully before starting the installation and keep this manual handy for future reference. If you have any another
query, please contact our dealer or local vendor from whom you have purchased the product. They are trained
and ready to serve you at the best. The warranty is valid for 2 years from the date of purchase. The warranty
does not apply to damage caused by incorrect installation or abnormal wear and tear. The company gives no
warranty against damage to any surface due to incorrect removal and installation of the product. This product is
warranted for manufacturing defects only.
TECHNICAL DATA
IP RATING IP20
BODY TYPE PC
DIMENSION 42.6x42.6x20mm
WIRING & INSTALLATION INSTRUCTION
A. DIRECT LIGHT CONNECTION
1. Please make sure to turn o the power before starting the
installation.
2. Installation must be performed by a qualied electrician.
3. When installing and using products, they must be far away
from re or high temperature objects.
4. For indoor use only.
• Make sure that the Input voltage of this product is as prescribed by the manufacturer. Other incoming voltages can
cause the product to break down and potentially harm the environment and your health.
• The wires must be connected correctly and in accordance with the colors of the wire and the instructions given in the
circuit diagram described in this instruction.
• Make sure before switching on that the power elements have a power lower than that specified by the manufacturer.
• Make sure before plugging in that the led light voltage is suitable for configuration with this product.
• This product is suitable for products manufactured by the company V-TAC, when connected with products of other
companies, V-TAC is not responsible for any adverse consequences for your health.
• The initial installation of the product must be done by a specialist with the relevant qualifications and skills.
• Before using this product, make sure that all parts are configured correctly according to the instructions in the attached
instruction.
• The product should not be used by people under 5 years of age without supervision by a parent or guardian.
• Make sure the power is OFF before starting the installation.
• Ensure that the wires are connected accurately according to the following diagram. (Input and output cannot be
reversed)
• Install and power it up.
1. This device requires Wi-Fi Frequency 2.4Ghz
2. Operating frequency (maximum transmitted
power) 2.412-2.484Ghz
WARNING
WIFI MODULE SAFETY INSTRUCTIONS
FCC WARNING
NOTE
This marking indicates that this
product should not be disposed of
with other household wastes.
Caution, Risk of electric shock
Lamp Mains
This is the safety alert symbol. This
symbol alerts you to potential hazards
that could result in property damage
and/or serious bodily harm or death.
Note: This equipment has been tested and found to comply
with the limits for a Class B digital device, pursuant to part
15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a res-
idential installation. This equipment generates uses and can
radiate radio frequency energy and, if not installed and used
in accordance with the instructions, may cause harmful inter-
ference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the
equipment o and on, the user is encouraged to try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit dierent from that to which the receiver is connected.
• Consult an experienced radio/TV technician for help.
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment
should be installed and operated with minimum distance 20cm between the radiator & your body.
WARNING SYMBOLS USED
APP INSTALLATION INSTRUCTIONS
B. LIGHT WITH 1-WAY SWITCH CONNECTION [1 GANG, SKU-23604]
Step 1: Turn the power button ON of the device. Then follow the below instruction for the device.
Step 2: Scan the given QR code, or download “Smart Life’ from the App Store (iOS) or the Google
Play Store (Android).
Step 3: Open the Smart Life app and tap on register for creating a new account. If you already
have an existing account, please proceed to please proceed to logging in.(Ref Fig 1)
Lamp
Fig 1
Mains
Switch
C. LIGHT WITH 2-WAY SWITCH CONNECTION [2 GANG, SKU-23605]
Smart Life
Lamp 1
Switch 2
Switch 1
Mains
Lamp 2
L-in

Produktspezifikationen

Marke: V-TAC
Kategorie: Smarth-Startseite
Modell: VT-5102

Brauchst du Hilfe?

Wenn Sie Hilfe mit V-TAC VT-5102 benĂśtigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten


Bedienungsanleitung Smarth-Startseite V-TAC

V-TAC

V-TAC VT-5132 Bedienungsanleitung

5 September 2024
V-TAC

V-TAC VT-5144 Bedienungsanleitung

5 September 2024
V-TAC

V-TAC VT-5175 Bedienungsanleitung

5 September 2024
V-TAC

V-TAC VT-5151 Bedienungsanleitung

5 September 2024
V-TAC

V-TAC VT-5145 Bedienungsanleitung

5 September 2024
V-TAC

V-TAC VT-5177 Bedienungsanleitung

5 September 2024
V-TAC

V-TAC VT-5102 Bedienungsanleitung

5 September 2024

Bedienungsanleitung Smarth-Startseite

Neueste Bedienungsanleitung fĂźr -Kategorien-

Elro

Elro AB600S-2 Bedienungsanleitung

14 Oktober 2024
ETiger

ETiger ES-D4A Bedienungsanleitung

4 Oktober 2024
Netgear

Netgear Orbi RBS50Y Bedienungsanleitung

2 Oktober 2024
Shelly

Shelly Qubino Wave 1PM Mini Bedienungsanleitung

1 Oktober 2024
Abus

Abus Z-Wave Gateway Bedienungsanleitung

27 September 2024
Chacon

Chacon 54650 Bedienungsanleitung

27 September 2024
EZVIZ

EZVIZ DL01 Pro Bedienungsanleitung

24 September 2024
Busch-Jaeger

Busch-Jaeger 2CKA006220A0006 Bedienungsanleitung

23 September 2024
JUNG

JUNG A 5192 KRM TS D Bedienungsanleitung

21 September 2024
Acer

Acer Air Monitor AM100 Bedienungsanleitung

20 September 2024