Abus Z-Wave Gateway Bedienungsanleitung

Abus Smarth-Startseite Z-Wave Gateway

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Abus Z-Wave Gateway (34 Seiten) in der Kategorie Smarth-Startseite. Dieser Bedienungsanleitung war für 8 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/34
SHGW10000
Instruction manual
Important notes and FAQs about this product and other products can
be found on the Internet page
www.abus.com/product/SHGW10000
App- 9 Version 1.4.
Firmware: 040032
Original operating instructions in German language.
Keep for future use!
2
German
Inauguration
Dear customer, dear customer,
Thank you for purchasing this product.
ABUS Security- 00 Center hereby declares that the gateway SHGW100 complies with the RED
directive 2014/53/EU. The gateway also meets the requirements of the following EU Directives:
EMC Directive 2014/30/EU and RoHS Directive 2011/65/EU. The full text of the EU Declaration of
Conformity is available at the following web addresses: www.abus.com/product/SHGW10000
In order to maintain this condition and ensure safe operation, the user must observe these operating
instructions!
If you have any questions, please contact your specialist trade partner
or contact our customer service:
Mail: ABUS Support, Linker Kreuthweg 5, 86444 Affing, Germany
E- - mail: support@abus sc.com
Phone: +49 8207 959 90 888
Hotline opening hours: Mon Thu: 08 17 h; Fri: 08 - - - 14 h
All contained company names and product names are trademarks of their respective owners. All rights
reserved.
Data storage is subject to country specific data protection guidelines.-
D isclaimer
These operating instructions have been prepared with the utmost care. Should you nevertheless
notice any omissions or inaccuracies, please let us know in writing at the above address.
ABUS Security-Center GmbH accepts no liability whatsoever for technical and typographical errors
and reserves the right to make changes to the product and operating instructions at any time without
prior notice.
ABUS Security-Center shall not be liable or responsible for any direct or indirect consequential
damages in connection with the equipment, performance and use of this product. No guarantee is
given for the content of this document.
3
German
safety instructions
Intended Use
Use the device exclusively for the purpose for
which it was built and designed! Any other use is
considered improper!
Declaration of conformity
ABUS Security-Center hereby declares that the
enclosed product(s) comply with the following
guidelines concerning the product(s):
RED Directive 2014/53/EU, EMC Directive
2014/30/EU, Low Voltage Directive 2014/35/EU,
RoHS Directive 2011/65/EU. The full text of the
EU Declaration of Conformity is available at the
following Internet address:
www.abus.com/product/Artikelnummer
("Article number" in the link is to be replaced by
the article number of the attached product(s)))
It can also be obtained from the following
address: ABUS Security-Center GmbH & Co.
KG, Linker Kreuthweg 5, 86444 Affing,
GERMANY
Important safety instructions
General information
Before using the device for the first time, please
read the following instructions carefully and
observe all warnings even if you are familiar with
electronic devices.
Damage caused by non-compliance with
these safety instructions will void the
warranty. We assume no liability for
consequential damages!
P ower supply
Operate this device only with a power source
that supplies the mains voltage specified on the
nameplate. If you are not sure which power
supply you have, contact your power company.
Disconnect the device from the mains power
supply before carrying out any maintenance or
installation work. The device will only be
completely disconnected from the mains if the
power supply unit is removed. In order to avoid
the risk of fire, the mains plug of the device
should always be disconnected from the mains
socket if the device is not to be used for a longer
period of time. Before a storm and / or
thunderstorm with danger of lightning, please
disconnect the device from the power supply or
connect the device to a UPS. Avoid overloading
power sockets, extension cords, and adapters as
this may result in fire or electric shock.
C ord
Always hold all cables by the plug and do not pull
on the cable itself. Never handle the power cord
with wet hands as this may cause a short circuit
or electric shock. Do not place the appliance,
pieces of furniture or other heavy objects on the
cables and ensure that they are not bent,
especially at the plug and at the connection
sockets.
Never tie a knot into a cable or tie it together with
other cables. All cables should be laid in such a
way that nobody steps on them or is obstructed.
A damaged power cord may cause a fire or
electric shock. Check the power cord from time
to time. Do not modify or tamper with the power
cord or plug. Do not use adapter plugs or
extension cords that do not comply with the
applicable safety standards, or tamper with the
power supply or power cords.
C hildren
Do not allow electrical appliances to fall into the
hands of children! Never allow children to use
electrical equipment unattended. Children are
not always able to recognize possible dangers
correctly. Small parts can be life-threatening if
swallowed. Keep packaging films away from
children. There is a danger of suffocation! This
device should not be handled by children. If used
improperly, springy parts can jump out and
cause injuries (e.g. eyes) to children.
S upervision
The commissioning of monitoring systems may
be prohibited or regulated by law in certain
countries. Before commissioning the plant, the
operator must ensure that the monitoring is
within the legal framework.
Installation location Operating
environment
Do not place heavy objects on the device.
The device is not designed for use in rooms with
appropriate temperature or humidity (e.g.
bathroom) or with excessive dust. For a precise
99specification, check the technical data of the
individual devices. Ensure that there is always
adequate ventilation, no direct heat sources on
the device, no direct sunlight or strong artificial
light hitting indoor devices, the device is not in
the immediate vicinity of magnetic fields (e.g.
loudspeakers), no open fire sources (e.g. (e.g.
burning candles), contact with splash and drip
water on indoor equipment and aggressive
liquids is avoided, the equipment is not operated
in the vicinity of water, in particular the
equipment must never be immersed (do not
place objects filled with liquids, e.g. vases or
beverages, on or next to the equipment), no
foreign objects may penetrate, the equipment is
not exposed to strong temperature fluctuations,
as otherwise humidity may condense and lead to
electrical short circuits, the equipment is not
exposed to excessive shocks and vibrations.
U npack
While unpacking the device, handle it with the
utmost care.
Packaging and packaging aids are recyclable
and should always be recycled.
If the original packaging is damaged, check
the unit first. If the device is damaged, return
it with packaging and inform the delivery
service.
C ommissioning
Before initial operation, observe all safety and
operating instructions!
Improper and unprofessional work on the
electricity grid or on the house installations
poses a danger not only to yourself but also
to other persons.
Maintenance and care
Disconnect the device from the power
supply for maintenance work or cleaning!
Maintenance
Have all maintenance work carried out by
qualified personnel only. Never open the housing
of the device or accessories if this is not
required. The device may only be opened for the
following applications:
 Mounting the device, inserting a storage
medium (SD card or hard disk), accessing
essential functions (reset button or WPS
button)
C leaning
Clean the housing of the device only with a damp
cloth. Do not use solvents, spirit, thinners or
other aggressive substances:
Gently rub the cotton cloth over the surface until
it is completely dry.
D isposal
Attention: The EU Directive 2012/19/EU
regulates the proper take-back,
treatment and recycling of used
electronic equipment. This symbol means that,
in the interests of environmental protection, the
device must be disposed of at the end of its
service life in accordance with the applicable
statutory regulations and separately from
household and commercial waste. The disposal
of the old appliance can be carried out by means
of appropriate official
take-back points in your country. Follow local
regulations when disposing of materials. For
more details about the take back (also for non- -
EU countries), contact your local administration.
Through separate collection and
Recycling conserves natural resources and
ensures that when the product is recycled, all
regulations for the protection of health and the
environment are complied with.


Produktspezifikationen

Marke: Abus
Kategorie: Smarth-Startseite
Modell: Z-Wave Gateway

Brauchst du Hilfe?

Wenn Sie Hilfe mit Abus Z-Wave Gateway benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Smarth-Startseite Abus

Bedienungsanleitung Smarth-Startseite

Neueste Bedienungsanleitung für -Kategorien-