Tristar TR-2568 Bedienungsanleitung

Tristar Bartschneider TR-2568

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Tristar TR-2568 (1 Seiten) in der Kategorie Bartschneider. Dieser Bedienungsanleitung war für 14 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF
Seite 1/1
TR-2573
EN | Instruction manual
NL | Gebruiksaanwijzing
FR | Mode d’emploi
DE | Bedienungsanleitung
ES | Manual de usuario
PT | Manual de utilizador
IT | Manuele utente
SV | Bruksanvisning
PL | Instrukcja obsługi
CS | Návod na použití
SK | Návod na použitie
PARTS DESCRIPTION / ONDERDELENBESCHRIJVING / DESCRIPTION DES PIÈCES / TEILEBESCHREIBUNG /
DESCRIPCIÓN DE LAS PIEZAS / DESCRIÇÃO DOS COMPONENTES / DESCRIZIONE DELLE PARTI /
BESKRIVNING AV DELAR / OPIS CZĘŚCI / POPIS SOUČÁSTÍ / POPIS SÚČASTÍ
1
2
3
4
5
6
9
8
10
11
7
WWW.TRISTAR.EU
Tristar Europe B.V. | Swaardvenstraat 65
5048 AV Tilburg | The Netherlands
ENInstruction manual
SAFETY INSTRUCTIONS
Please take into consideration the following health and safety
precautions. Read these instructions before using the trimmer.
• By ignoring the safety instructions the
manufacturer cannot be held responsible for
the damage.
• This appliance is only to be used for
household purposes and only for the purpose
it is made for.
• Connect the power supply adaptor to an AC
mains supply of 100-240 V.
• After use and before cleaning, disconnect the
power supply adaptor from the mains supply
socket.
• Do not unplug the device by pulling on the
cord.
• Never move the appliance by pulling the cord
and make sure the cord cannot become
entangled.
• Do not let the power cord hang over the edge
of a table or desktop.
• Do not let the device nor the power cord touch
any hot surfaces.
• If the supply cord is damaged, it must be
replaced by the manufacturer, its service
agent or similarly qualified persons in order to
avoid a hazard.
• The device is intended for cutting natural
human hair. Do not use the device for cutting
artificial or animal hair. Using the product for
other intended purposes will nullify the
guarantee.
• Do not touch the power supply adaptor with
wet hands, especially when plugging and
unplugging the device from the power supply.
• Only use the adaptor that is supplied with the
trimmer.
• Only use easily accessible power supply
sockets.
• Do not cover the adaptor. This can lead to a
dangerous temperature increase.
• To protect yourself against an electric shock,
do not immerse the cord, plug or appliance in
the water or any other liquid.
• Do not place the device on a wet surface or
cloth during operation. Always make sure the
device is dry when using.
• Do not use the device while bathing or
showering.
• Do not place or store the device where it can
fall into water.
• Do not use the device with a comb attachment
that is damaged. This can lead to serious
injury.
• Never try to remove any foreign bodies out of
the device using another sharp object (i.e. a
comb or scissors)
• Clean the device after every use.
• This appliance can be used by children aged
from 8 years and above and persons with
reduced physical, sensory or mental
capabilities or lack of experience and
knowledge if they have been given
supervision or instruction concerning use of
the appliance in a safe way and understand
the hazards involved. Children shall not play
with the appliance. Cleaning and user
maintenance shall not be made by children
without supervision.
• To protect children against the dangers of
electrical appliances, please make sure that
you never leave the appliance unattended.
Therefore you have to select a storage place
for the appliance where children are not able
to grab it. Make sure that the cable is not
hanging in a downward position.
• Only use the recommended comb
attachments that are supplied with the device.
• The device can be used while plugged in or
cordless when fully charged.
• When using the device, the hair must be
clean, dry and combed well.
• Put a towel around your neck to avoid
accidental injury.
• The device contains batteries and can only be
replaced by professionals.
WARNING: Do not use the device near water, over the bath, pool or
other water basin.
WARNING: Observe the above mentioned rules in order to avoid
burning, electric shock or fire hazard.
PARTS DESCRIPTION
1. Blades
2. Comb attachment
3. Length settings
4. Zoom wheel
5. On/Off button
6. Battery charge indicator
7. Charging cable
8. Comb attachment
9. Comb attachment
10. Blade oil
11. Brush
BEFORE THE FIRST USE
• Take the appliance andaccessoriesoutthebox.Removethe
stickers,protective foilorplasticfrom thedevice.
• The adapter is not provided with the set. Please use an adaptor that is
5V 1000mA.
• Insert the power cord into the device and in the adaptor. Then insert the
adapter in the mains supply outlet (100-240V). Make sure the On/Off
switch is Off.
• The light will be flashing red and will turn blue when it is fully charged.
• Charge the device at least 2 hours before using it for the first time
wireless and after a long period of disuse. When the device is fully
charged, you can use it wirelessly up to 90 minutes.
USE
• Comb the beard or moustache before you start trimming.
• If you trim without the comb, your hair is cut off close to the skin.
Inserting and replacing the comb attachments
• The device is supplied with two comb attachments that allows you to trim
hair to different lengths as is keeps the trimming head at a certain
distance to your skin. This distance determines the hair length and can
be adjusted by turning the zoom wheel.
• Select the attachment according to the length of cutting:
– The comb attachment (8) can cut hair for 20 cutting lengths from
1-10mm, 0.5mm per set.
– The comb attachment (9) can cut hair for 20 cutting lengths from
11-20mm, 0.5mm per set.
• Make sure that the two side protrusions are visibly locked in fastening
inlets of the comb attachment
• Replace one attachment removing it and inserting another as described
above.
• Turn right the cutting length adjustment knob , to increase the length of
cutting or left to reduce it.
Cutting hair and trimming a beard with the attachments
Make sure that the appliance is fully charged when you start to cut. Only
use appliance on clean, dry hair. Do not use it on freshly wet washed hair.
Preparation
• Comb the hair in the direction of growth.
• Slide the preferred comb attachment into the device like explained in
previous chapter.
• When trimming for the first time, start at the maximum trimming length to
familiarize yourself with the device
• Switch on the device
Trimming
• Move the appliance through the hair slowly.
• To trim in the most effective way, move the device against the
direction of hair growth. Be aware that all hair does not grow in the same
direction, you will need to move the device in different directions during
the process.
• Make sure that the flat part of the comb is always fully in contact with the
scalp to obtain an even result.
• Make overlapping passes over the head to ensure that you cut all hair
that needs to be cut.
• Use the same technique of moving the device against the
direction of hair growth for beard trimming.
• To achieve a good result with curly, sparse or long hair, use a comb to
guide the hair towards the appliance
Cutting hair and trimming a beard without the attachments
•WARNING: The blades are very sharp. High risk of injury!
• You can cut the hair in uniform length of 0.5–1 mm without comb
attachment.
• For clipping the hairline of bristle and whiskers, neck shaving:
– Move the hair clipper slowly along hair.
– Turn the device so, that the back part was directed upwards.
– Place the edge of the cutting head without comb
attachment on desired length of bristle hairline.
– Move down the clipper in operation.
CLEANING AND MAINTENANCE
• Clean the appliance after each use.
• Do not hold the adaptor with wet hands while plugging and unplugging
from the mains supply outlet.
• Always switch off the device by switching the On/Off button to the “Off”
position. Ensure the device is plugged out of the main supply outlet.
• Remove the comb attachment from the hair clipper:
– Press forward cutting head with your thumb, in order
to release the cutting head from the frame.
– Remove the cutting head carefully. If necessary, rinse
the plastic comb attachments under running water, and then dry
them thoroughly.
– Remove the remains of hair from the cutting head with attached
cleaning brush.
– Insert the protrusion of cutting head back into the locking hole in
the frame of cutting head.
– Press gently the cutting head in, until you hear a
clicking sound of locking.
• : In order to reduce friction, insert one or two drops of acid less oilTIP
between the blades and distribute evenly from time to time. Remove the
exceeding oil with a cloth. During this process, be careful that the on/off
button is not pushed.
• Clean the appliance after each use. Rinse the razor with warm water and
use the supplied brush to thoroughly clean the various parts. Do not use
detergents. Only keep the shaving heads under the water, not the total
appliance. Never immerse the appliance in water or other liquid, the
appliance and its various parts are not dishwasher safe. Let the shaving
head dry.
• After each use of the trimmer remove the hairs with the supplied cleaning
brush and a regular drop an acid free oil between the blades.
ENVIRONMENT
This appliance should not be put into the domestic garbage at the
end of its durability, but must be offered at a central point for the recycling
of electric and electronic domestic appliances. This symbol on the
appliance, instruction manual and packaging puts your attention to this
important issue. The materials used in this appliance can be recycled. By
recycling of used domestic appliances you contribute an important push to
the protection of our environment. Ask your local authorities for information
regarding the point of recollection.
Support
You can find all available information and spare parts at www.tristar.eu!

Produktspezifikationen

Marke: Tristar
Kategorie: Bartschneider
Modell: TR-2568

Brauchst du Hilfe?

Wenn Sie Hilfe mit Tristar TR-2568 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten


Bedienungsanleitung Bartschneider Tristar

Tristar

Tristar TR-2568 Bedienungsanleitung

3 September 2024
Tristar

Tristar TR-2547 Bedienungsanleitung

1 August 2024
Tristar

Tristar TR-2563 Bedienungsanleitung

12 Juli 2024
Tristar

Tristar TR-2561 Bedienungsanleitung

14 Januar 2024

Bedienungsanleitung Bartschneider

Neueste Bedienungsanleitung für -Kategorien-

Coline

Coline PSA-227RICEP Bedienungsanleitung

7 Oktober 2024
Scarlett

Scarlett SC-263 Bedienungsanleitung

5 Oktober 2024
Stihl

Stihl FSA 200 Bedienungsanleitung

3 Oktober 2024
Rowenta

Rowenta Wet & Dry TN5140F0 Bedienungsanleitung

29 September 2024
BaByliss

BaByliss For Men E876E Bedienungsanleitung

29 September 2024
BaByliss

BaByliss Wtech Precision Plus T830E Bedienungsanleitung

28 September 2024
Domo

Domo DO7033 Bedienungsanleitung

21 September 2024
BaByliss

BaByliss Japanese Steel 7865U Bedienungsanleitung

11 September 2024
BaByliss

BaByliss Graphite Precision T987U Bedienungsanleitung

11 September 2024
BaByliss

BaByliss Super-X Metal S996U Bedienungsanleitung

11 September 2024