Tripp Lite PS361206 Bedienungsanleitung

Tripp Lite Anbaustein PS361206

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Tripp Lite PS361206 (4 Seiten) in der Kategorie Anbaustein. Dieser Bedienungsanleitung war für 30 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF

Seite 1/4

Power Strips

Models: PS120406, PS120420, PS240406, PS361206,

PS361220 and PS480806

1111 W. 35th Street, Chicago, IL 60609 USA • www.tripplite.com/support

Este manual esta disponible en español en la página de Tripp Lite: www.tripplite.com

Ce manuel est disponible en français sur le site Web de Tripp Lite : www.tripplite.com

Owner’s Manual

PROTECT YOUR INVESTMENT!

and ultimate peace of mind.

You could also win an

ISOBAR6ULTRA surge protector—

a $50 value!

www.tripplite.com/warranty

PS-Series Power Strips are designed to provide convenient access to multiple AC outlets.

Note: The Power Strip models listed above DO NOT provide your connected equipment with surge or noise

protection.

14-10-112-9333D3-version2.indd 1 11/5/2014 1:07:55 PM

Equipment Connection

Plug your equipment into the Power Strip’s AC receptacles. DO NOT plug in equipment that draws

more total amps than your Power Strip’s amperage rating (see label on Power Strip for amperage

rating), or you will trip the circuit breaker. If the circuit breaker trips, remove overload and depress

breaker to reset. Leave enough clearance at the end of the Power Strip to allow the circuit

breaker to operate normally.

Note: Select models with a power switch feature a protective switch cover. To access the switch, ﬂip open the

attached cover.

Important Safety Instructions

SAVE THESE INSTRUCTIONS

• DO NOT connect the power strip to an ungrounded outlet.

• DO NOT use the power strip with 2-wire extension cords or adapters.

• This power strip is designed for indoor use only. Install the power strip away from heat-emitting

appliances such as radiators or heat registers.

• Do not install where excessive moisture is present.

• Do not plug extension cords into the power strip.

• Never install electrical, telephone, network or coaxial wiring during a lightning storm.

• Do not drill into any part of the housing or open the housing for any reason. There are no

user-serviceable parts inside.

14-10-112-9333D3-version2.indd 2 11/5/2014 1:07:55 PM

Speciﬁcations

Model

Amperage

Rating

Outlet

Qty. x Type Input Plug Cord Length

Overall

Length Breaker

PS120406 15A 4 x 5-15R 5-15P 6 ft. 12 in. 15A

PS120420 20A 2 x 5-20R,

2 x 5-15R

5-20P 15 ft. 12 in. 20A

PS240406 15A 4 x 5-15R 5-15P 6 ft. 24 in. 15A

PS361206 15A 12 x 5-15R 5-15P 6 ft. 36 in. 15A

PS361220 20A 2 x 5-20R,

10 x 5-15R

5-20P 15 ft. 36 in. 20A

PS480806 15A 8 x 5-15R 5-15P 6 ft. 48 in. 15A

Wall Mounting

All Power Strip models feature clips for horizontal or vertical mounting on a variety of surfaces.

The user must supply other mounting hardware (screws, etc.) and determine its suitability for use

with the chosen mounting surface.

1 Mark a straight horizontal or vertical line where

you want to mount the Power Strip. At each end

of the line, mark where the edges of the Power

Strip will be located. Place a mounting clip on

the mounting surface 1” in from these edges

and mark where the screws must be driven into

the wall. For strips longer than 48” (120 cm),

also mark a screw hole for a third mounting clip

midway between the other two.

2 Keyhole Mounting: Drive #8 screws directly

into the mounting surface. Snap the mounting

clips onto the Power Strip 2a , then hang the

Power Strip on the screws by the keyhole slots

on its mounting clips 2b .

3 Clip Mounting: Drive #10 screws through

washers, through the centers of the mounting

clips and into the mounting surface

3a . Place

the Power Strip inside one edge of the mounting

clips, then snap the Power Strip into place 3b.

14-10-112-9333D3-version2.indd 3 11/5/2014 1:07:56 PM

Produktspezifikationen

Marke:	Tripp Lite
Kategorie:	Anbaustein
Modell:	PS361206
Breite:	38.1 mm
Tiefe:	41.7 mm
Gewicht:	1020 g
Produktfarbe:	Black, Grey
Höhe:	925.3 mm
Material:	Aluminium
AC Eingangsspannung:	120 V
Verpackungsbreite:	83.8 mm
Verpackungstiefe:	1003.3 mm
Verpackungshöhe:	61 mm
Paketgewicht:	1360 g
Zertifizierung:	UL1363\r\ncUL\r\nRoHS
Ursprungsland:	Vietnam
Kabellänge:	1.83 m
Ein-/Ausschalter:	Ja
Anzahl Produkte pro Versandkarton:	12 Stück(e)
Gewicht Versandkarton:	16600 g
Länge des Versandkartons:	1021.1 mm
Breite des Versandkartons:	287 mm
Höhe des Versandkartons:	261.6 mm
Kabelfarbe:	Schwarz
Anzahl enthaltener Produkte:	1 Stück(e)
Hauptkarton GTIN (EAN/UPC):	10037332186628
Anzahl der AC-Ausgänge:	12 AC-Ausgänge
AC-Steckertypen:	NEMA 5–15R
Stromstärke (maximal):	15 A