Tripp Lite PDU1226 Bedienungsanleitung

Tripp Lite Anbaustein PDU1226

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Tripp Lite PDU1226 (12 Seiten) in der Kategorie Anbaustein. Dieser Bedienungsanleitung war für 34 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF

Seite 1/12

PDU Rackmount

Power Strips

Designed for Mounting in 19 in. Racks

(Series Numbers: AG-IP120V6IPRM, AG-IP120V20RM)

Important Safety Instructions 2

Installation 2

Features 3

Specifications 3

Warranty & Product Registration 4

Español 5

Français 9

Owner’s Manual

WARRANTY REGISTRATION

automatically entered to win an ISOBAR

surge protector in our monthly drawing!

tripplite.com/warranty

1111 W. 35th Street, Chicago, IL 60609 USA • tripplite.com/support

20-03-224-932120.indb 1

20-03-224-932120.indb 120-03-224-932120.indb 1 5/19/2020 11:37:30 AM

5/19/2020 11:37:30 AM

5/19/2020 11:37:30 AM5/19/2020 11:37:30 AM

Important Safety Instructions

This manual contains information concerning the proper installation and

use of Tripp Lite’s Rackmount Power Strips.

SAVE THESE INSTRUCTIONS.

Do not connect your power strip to an ungrounded outlet. Do not use it with extension

cords or adapters that eliminate its connection to ground. Your power strip is designed

for indoor use only. Install it away from heat emitting devices such as radiators and heat

registers. Do not install where excessive moisture or other conductive contaminants are

present. Never install electrical wiring during a lightning storm.

The power requirement of each device connected to an outlet of your power strip must

not exceed the Outlet Power Rating of your power strip (see Specifications). The total

power requirements of all devices connected to your power strip must not exceed the

Maximum Load Rating of your power strip (see Specifications).

Installation

1U Rackmount Installation

0U Rackmount Installation

1U Rackmount Installation

To Mount Unit in Rack: Put four user-supplied

rackmount screws ( ) through the unit’s mounting A

ears ( ) and into the rack rails as shown. The user B

must determine the fitness of the rackmount screws to

hold the unit in the rack before installation.

0U Rackmount Installation

1. Reorient Mounting Ears: Unscrew the screws (A)

holding the unit’s mounting ears ( ) to the sides of B

the unit. Use the screws from Step 1 ( ) to reattach A

the mounting ears ( ) to the unit as shown. Use B

only the manufacturer-supplied screws or their

equivalent (#6-32, ¼” flat head) to reattach the

mounting ears.

2. Mount Unit on Outside of Rack Rails: Put four

user-supplied screws ( ) or similar mounting C

hardware through the unit’s mounting ears ( ) and B

into the side of the rack as shown. The user must

determine the fitness of the user-supplied mounting

hardware to support the unit before mounting.

Wallmount/Under Counter Installation

Reorient the unit’s mounting ears as per the 0U Rackmount Installation above, then put four user-

supplied screws or similar mounting hardware through the unit’s mounting ears and into the

mounting surface. The user must determine the fitness of the user-supplied mounting hardware to

support the unit before mounting.

20-03-224-932120.indb 2

20-03-224-932120.indb 220-03-224-932120.indb 2 5/19/2020 11:37:31 AM

5/19/2020 11:37:31 AM

5/19/2020 11:37:31 AM5/19/2020 11:37:31 AM

Features

Specifications

PDU1215 PDU1220 PDU2430

Nominal Voltage/Frequency: 120V/50 or 60 Hz 120V/50 or 60 Hz 120V/50 or 60 Hz

Output Power Rating (amps): 15 amps 20 amps 24 amps

AC Receptacles: 13 x NEMA 5-15R 13 x NEMA 5-15/20R 24 x NEMA 5-15R

(12 rear/1 front) (12 rear/1 front) (12 rear/12 front)

AC Line Cord: 15', w/NEMA 5-15P plug 15', w/NEMA 5-20P plug 15', w/NEMA L5-30P plug

Circuit Breaker(s) (Resettable): 15 amps 20 amps 2 x 15 amps

Dimensions (HxWxD, inches): 1¾ × 17¼ × 3¾ 1¾ × 17¼ × 3¾ 1¾ × 17¼ × 3¾

PDU121506 PDU1226 PDU1220T6

Nominal Voltage/Frequency 120V/50 or 60 Hz 120V/50 or 60 Hz 120V/50 or 60 Hz

Output Power Rating (amps): 15 amps 20 amps 20 amps

AC Receptacles 13 x NEMA 5-15R 13 x NEMA 5-15/20R 13 x NEMA 5-15/20R

(12 rear/1 front) (12 rear/1 front) (12 rear/1 front)

AC Line Cord: 6’, w/NEMA 5-15P plug 6’, w/NEMA 5-20P plug 6’, w/NEMA L5-20P plug

Circuit Breaker(s) (Resettable) 15 amps 20 amps 20 amps

Dimensions (HxWxD, inches): 1¾ × 17¼ × 3¾ 1¾ × 17¼ × 3¾ 1¾ × 17¼ × 3¾

PDU12IEC PDU1220T

Nominal Voltage/Frequency: 100V to 240V/50 or 60Hz 120V/50 or 60 Hz

Output Power Rating (amps): 15 amps for 100V to 120V or 20 amps

16 amps for 208 to 240V

AC Receptacles: 4 x IEC-C13 (front), 13 x NEMA 5-15/20R

8 x IEC-C13/2 x IEC-C19 (rear) (12 rear/1 front)

AC Line Cord: N/A (IEC320-C20 inlet) 15', w NEMA L5-20P plug

Circuit Breaker(s) (Resettable): 2 x 16 amps 20 amps

Dimensions (HxWxD, inches): 1¾ × 17¼ × 3¾ 1¾ × 17¼ × 3¾

Circuit Breaker(s)

If the current draw of the equipment connected to your power strip exceeds your model’s

Maximum Load Rating (see Specifications) for longer than a few seconds, a circuit breaker will trip

to prevent any possible damage. When a circuit breaker trips, its plunger will pop up. Remove

excess equipment and allow the breaker to cool one minute before depressing its plunger to reset

the breaker.

Grounding Lug

Use this screw (located by the power strip’s receptacles) to connect your power strip to ground.

Input Receptacle (IEC Model Only)

The PDU12IEC has no power cord. Instead, it has a IEC320-C20 inlet receptacle. To connect a

PDU12IEC to utility power, use a user-supplied detachable power cord with an IEC plug on one

end and a plug appropriate to your local utility outlets on the other.

20-03-224-932120.indb 3

20-03-224-932120.indb 320-03-224-932120.indb 3 5/19/2020 11:37:31 AM

5/19/2020 11:37:31 AM

5/19/2020 11:37:31 AM5/19/2020 11:37:31 AM

Produktspezifikationen

Marke:	Tripp Lite
Kategorie:	Anbaustein
Modell:	PDU1226
Breite:	482.6 mm
Tiefe:	114.3 mm
Gewicht:	2360 g
Produktfarbe:	Schwarz
Höhe:	44.4 mm
Energieschutzeigenschaften:	Überlastschutz
Stecker:	NEMA 5–20P
AC Eingangsfrequenz:	50 - 60 Hz
Relative Luftfeuchtigkeit in Betrieb:	5 - 95 %
Verpackungsbreite:	518.2 mm
Verpackungstiefe:	236.2 mm
Verpackungshöhe:	55.9 mm
Paketgewicht:	2590 g
Montage:	Horizontal/Vertikal
Ursprungsland:	China
Typ:	Einphasig
Kabellänge:	1.83 m
Betriebsanleitung:	Ja
Gehäusematerial:	Metall
Temperaturbereich bei Lagerung:	-30 - 50 °C
Anzahl Produkte pro Versandkarton:	6 Stück(e)
Gewicht Versandkarton:	16100 g
Länge des Versandkartons:	342.9 mm
Breite des Versandkartons:	525.8 mm
Höhe des Versandkartons:	256.5 mm
Max. Leistung:	2500 W
Rackmontageset:	Ja
Höhe bei Betrieb:	0 - 3000 m
Hauptkarton GTIN (EAN/UPC):	10037332255751
Anzahl der AC-Ausgänge:	13 AC-Ausgänge
AC-Steckertypen:	NEMA 5–15R, NEMA 5–20R
Stromstärke (maximal):	20 A
Nominale Eingang Spannung:	100 - 127 V
Nominale Ausgang Spannung:	100 - 127 V
Rack-Kapazität:	0U/1U
PDU-Typen:	Standard