Tripp Lite PS-415-HG-OEM Bedienungsanleitung

Tripp Lite Anbaustein PS-415-HG-OEM

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Tripp Lite PS-415-HG-OEM (8 Seiten) in der Kategorie Anbaustein. Dieser Bedienungsanleitung war für 16 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF

Seite 1/8

PROTECT YOUR INVESTMENT!

and ultimate peace of mind.

You could also win an

ISOBAR6ULTRA surge protector—

a $100 value!

www.tripplite.com/warranty

1111 W. 35th Street, Chicago, IL 60609 USA • www.tripplite.com/support

Owner’s Manual

PS Series

Power Strips

Español 4 • Français 6

17-06-031-933707.indb 1 6/6/2017 8:52:51 AM

Installation

1 Connect Your Power Strip to Your AC Power Line

Plug the power cord into a utility outlet. The power strip’s power cord should only be connected

to a standard 3-wire grounded 120V AC 60 Hz outlet.

2 Connect AC Equipment to Your Power Strip

Plug the AC power cords of your equipment into your power strip. Do not use extension cords

or adapters that eliminate the connection to ground. DO NOT OVERLOAD your power strip. Each

outlet can handle a load of up to the model’s amp rating, but do not exceed a total load of

more than the model’s amp rating for all outlets. If the circuit breaker trips, outlets will cease to

provide power. Reduce the load on the power strip down to your unit’s amp rating by unplugging

excess equipment, then depress the circuit breaker button to reset and restore power.

IMPORTANT SAFETY INSTRUCTIONS.

SAVE THESE INSTRUCTIONS.

WARNING

Use of this equipment in life support applications where failure of this

equipment can reasonably be expected to cause the failure of the life

support equipment or to signiﬁcantly affect its safety or effectiveness

is not recommended. Do not use this equipment within oxygen-enriched

atmospheres, or within 0.3 m of a point at which an oxygen-enriched

atmosphere is intentionally vented.

CAUTION

DO NOT connect to an ungrounded outlet. DO NOT use with extension cords or

adapters that eliminate the connection to ground. The power strip is designed

for indoor use only. Install the power strip away from heat emitting appliances

such as radiators or heat registers. Do not install where excessive moisture

or other conductive contaminants are present. Never install electrical wiring

during a lightning storm.

17-06-031-933707.indb 2 6/6/2017 8:52:52 AM

Power Strip Care and Maintenance

Warning: Do not spray with liquid cleaning products.

• To clean, unplug unit and wipe with a clean cloth. Cloth may be dampened with all-purpose

cleaner.

• Check Circuit Breaker (CB) status. Normal operation requires CB be depressed.

• Ensure mechanical integrity of case.

• Ensure mechanical integrity of power cord. It should be free of cuts, frays, and exposed wires/

conductors.

• Tripp Lite recommends annual inspection of its products when they are used in a typical hospital/

medical/healthcare/assisted living environment.

Warranty and Product Registration

Limited Lifetime Warranty

Seller warrants this product, if used in accordance with all applicable instructions, to be free from original defects in material and

workmanship for its lifetime. If the product should prove defective in material or workmanship within that period, Seller will repair

or replace the product, at its sole discretion. Service under this Warranty can only be obtained by Buyer delivering or shipping the

product (with all shipping or delivery charges prepaid) to: Tripp Lite, 1111 W. 35th Street, Chicago, IL 60609. Seller will pay return

shipping charges. The warranties of all TRIPP LITE surge protectors are null and void if they have been connected to the output of any

UPS system. The warranties of all TRIPP LITE UPS Systems are null and void if a surge protector has been connected to its output

receptacles. Visit www.tripplite.com/support before sending any equipment back for repair.

THIS WARRANTY DOES NOT APPLY TO NORMAL WEAR OR TO DAMAGE RESULTING FROM ACCIDENT, MISUSE, ABUSE OR NEGLECT.

SELLER MAKES NO EXPRESS WARRANTIES OTHER THAN THE WARRANTY EXPRESSLY SET FORTH HEREIN. EXCEPT TO THE EXTENT

PROHIBITED BY APPLICABLE LAW, ALL IMPLIED WARRANTIES, INCLUDING ALL WARRANTIES OF MERCHANTABILITY OR FITNESS, ARE

LIMITED IN DURATION TO THE WARRANTY PERIOD SET FORTH ABOVE; THIS WARRANTY EXPRESSLY EXCLUDES ALL INCIDENTAL AND

CONSEQUENTIAL DAMAGES. (Some states do not allow limitations on how long an implied warranty lasts, and some states do not

allow the exclusion or limitation of incidental or consequential damages, so the above limitations or exclusions may not apply to you.

This Warranty gives you speciﬁc legal rights, and you may have other rights which vary from jurisdiction to jurisdiction).

WARNING: The individual user should take care to determine prior to use whether this device is suitable, adequate or safe for the use

intended. Since individual applications are subject to great variation, the manufacturer makes no representation or warranty as to the

suitability or ﬁtness of these devices for any speciﬁc application.

Product Registration

Visit www.tripplite.com/warranty today to register your new Tripp Lite product. You’ll be automatically entered into a drawing for a

chance to win a FREE Tripp Lite product!*

* No purchase necessary. Void where prohibited. Some restrictions apply. See website for details.

Regulatory Compliance Identiﬁcation Numbers

For the purpose of regulatory compliance certiﬁcations and identiﬁcation, your Tripp Lite product has been assigned a unique series

number. The series number can be found on the product nameplate label, along with all required approval markings and information.

When requesting compliance information for this product, always refer to the series number. The series number should not be con-

fused with the marketing name or model number of the product.

Tripp Lite has a policy of continuous improvement. Speciﬁcations are subject to change without notice.

1111 W. 35th Street, Chicago, IL 60609 USA • www.tripplite.com/support

17-06-031-933707.indb 3 6/6/2017 8:52:52 AM

Produktspezifikationen

Marke:	Tripp Lite
Kategorie:	Anbaustein
Modell:	PS-415-HG-OEM
Breite:	63.5 mm
Tiefe:	43.9 mm
Gewicht:	1170 g
Produktfarbe:	Weiß
Höhe:	216.9 mm
AC Eingangsspannung:	120 V
AC Eingangsfrequenz:	50 - 60 Hz
Verpackungsbreite:	158 mm
Verpackungstiefe:	62 mm
Verpackungshöhe:	248.9 mm
Paketgewicht:	1360 g
Montage:	Ja
Ursprungsland:	Vietnam
Kabellänge:	4.572 m
Ein-/Ausschalter:	Nein
Anzahl Produkte pro Versandkarton:	10 Stück(e)
Gewicht Versandkarton:	13400 g
Länge des Versandkartons:	326.9 mm
Breite des Versandkartons:	332 mm
Höhe des Versandkartons:	267 mm
Anzahl enthaltener Produkte:	1 Stück(e)
Hauptkarton GTIN (EAN/UPC):	10037332139211
Anzahl der AC-Ausgänge:	4 AC-Ausgänge
AC-Steckertypen:	NEMA 5–20R
Stromstärke (maximal):	15 A
Unterstützte Positionierung:	Drinnen