Tripp Lite PowerVerter APSX4048SW Bedienungsanleitung
Tripp Lite
Akku
PowerVerter APSX4048SW
Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Tripp Lite PowerVerter APSX4048SW (48 Seiten) in der Kategorie Akku. Dieser Bedienungsanleitung war für 12 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet
Seite 1/48
1
Owner’s Manual
Sine Wave DC-to-AC Inverter/Charger
Model: APSX4048SW
48 VDC to 230 VAC
1111 W. 35th Street, Chicago, IL 60609 USA • www.tripplite.com/support
Copyright © 2014 Tripp Lite.
Table of Contents
Important Safety Instructions 2
1. Overview & Features 3
1.1 Overview 3
1.2 Front Panel Controls, LCD Screen 3
and LED Indicators
1.3 Optional Features 4
2. Battery Charger 4
2.1 Mode of Operation 4
2.2 Transfer Switching Speed 4
3. Battery Installation 4
and Maintenance
3.1 Select Battery Type 4
3.2 Monthly Maintenance 6
3.3 Battery Installation 6
3.4 Battery Connection 6
4. Inverter/Charger Single-Phase 9
Installation
4.1 Installation 9
4.2 Installation Diagrams and Charts 9
4.3 Installation and Start-Up 10
4.4 Single-Phase Parallel Stacking 11
Installation and Start-Up
5. Inverter/Charger 3-Phase 13
Parallel Installation
5.1 Installation 13
5.2 Installation Diagrams and Charts 13
5.3 Installation and Start-Up 14
6. Operation 16
6.1 Modes of Operation 16
(Single and 3-Phase)
6.2 Settings and Parameters 18
6.3 Single-Phase Parallel Operation 20
6.4 3-Phase Parallel Operation 21
7. Technical Specifications 22
8. Troubleshooting 22
9. Service 23
Русский 24
PROTECT YOUR INVESTMENT!
Register your product for quicker service and ultimate peace of mind.
You could also win an ISOBAR6ULTRA surge protector—a $50 value!
www.tripplite.com/warranty
2
Important Safety Instructions
SAVE THESE INSTRUCTIONS!
This manual contains important instructions and warnings that should be followed during the installation,
operation and storage of all Tripp Lite Inverter/Chargers.
Location Warnings
• Do not mount unit with its front or rear panel facing down (at any angle). Mounting in this manner will seriously
inhibit the unit’s internal cooling, eventually causing product damage not covered under warranty.
• Install your Inverter/Charger in a location or compartment that minimizes exposure to heat, dust, direct sunlight and
moisture. Flooding the unit with water will cause it to short-circuit and could cause personal injury due to electric shock.
• For proper ventilation, allow a minimum 2 inches of clearance at front and back of the Inverter/Charger. To avoid overheating
the Inverter, the compartment that houses the Inverter/Charger must be properly ventilated with adequate outside air flow.
The heavier the load of connected equipment, the more heat will be generated by the unit.
• Do not install the Inverter/Charger near magnetic storage media, as this may result in data corruption.
• Do not install the Inverter/Charger near flammable materials, fuel or chemicals.
Battery Connection Warnings
• Multiple battery systems must be comprised of batteries of identical voltage, age, amp-hour capacity and type.
• Because explosive hydrogen gas can accumulate near batteries if they are not well ventilated, do not install batteries in a
“dead air” compartment. The battery compartment should have some ventilation to outside air.
• Sparks may result during final battery connection. Always observe proper polarity as batteries are connected.
• Do not allow objects to contact the DC input terminals. Do not short or bridge these terminals together. Serious personal
injury or property damage could result.
Ground Connection Warnings
• Safe operation requires connecting the Inverter/Charger’s Main Ground Terminal directly to the frame of the vehicle or
earth ground.
Equipment Connection Warnings
• Use of this equipment in life support applications where failure of this equipment can reasonably be expected to cause
the failure of the life support equipment or to significantly affect its safety or effectiveness is not recommended. Do not
use this equipment in the presence of a flammable anesthetic mixture with air, oxygen or nitrous oxide.
• You may experience uneven performance results if you connect a surge suppressor, line conditioner or UPS system to the
output of the Inverter/Charger.
• User must supply proper protection for wire openings in unit panels.
Operation Warnings
• Your Inverter/Charger does not require routine maintenance.
• Potentially lethal voltages exist within the Inverter/Charger as long as the battery supply is connected. During any service
work, the battery supply should therefore be disconnected.
• Do not connect or disconnect batteries while the Inverter/Charger is operating from the battery supply. Dangerous arcing may
result.
Status
APSX4048SW
UP
DOWN
SET ENTER
Fault
3 54
1
2
7
8
6
3
1. Overview and Features
1.1 Overview
• Tripp Lite’s APSX4048SW Sine Wave Inverter/Charger is a heavy-duty unit generating a pure sine wave in single-phase or
3-phase power from a 48V battery bank. The APSX4048SW can supply power to a wide range of connected equipment,
from heaters, air conditioners, refrigerators and vacuum cleaners to computers and peripheral devices. The APSX4048SW is
designed to work in heavy load conditions, so de-rating is unnecessary.
• The APSX4048SW’s smart charger is compatible with various battery types and sizes. The switch module automatically
diverts the energy transfer path between the Inverter and an AC input. When the AC source is lower than the transfer level,
the electrical path switches to the Inverter and draws power from the battery source. Otherwise, the load is powered by the
AC input.
1.2 Front Panel Controls
1.2.1 Controls, LCD Screen and LED Indicators
1 This 2-line dot matrix display LCD Screen:
indicates a wide range of power inverter
operating conditions and diagnostic data. It
also displays Inverter/Charger settings and
options when in SETTING mode.
2 This button offers 3 main ON/OFF Button:
functions depending on the power input
when pressed:
• CHARGING/STANDBY switching
(when used with AC input).
• INVERTING/STANDBY switching
(when used with DC input).
• STANDBY mode
(AC bypass output and no charge).
3 Return to previous page.SET Button:
4 This button allows you DOWN Button:
to browse through different operating
conditions and options on the LCD display.
Pressing down the DOWN button for an
extended duration allows the cursor in the
LCD screen to change to a different position.
5 UP Button: This button allows you to browse through different operating conditions and options on the LCD display.
Pressing down the UP button for an extended duration allows the cursor in the LCD screen to change to a different
position.
6 This button allows you to select an item in the menu.ENTER Button:
7 STATUS LED
8 FAULT LED: This red light will flash when your inverter detects an internal fault (overheating, overvoltages, etc.) or when it
detects a wiring fault from the AC or DC power source (reversed phases, missing ground, etc.).
Produktspezifikationen
| Marke: | Tripp Lite |
| Kategorie: | Akku |
| Modell: | PowerVerter APSX4048SW |
Brauchst du Hilfe?
Wenn Sie Hilfe mit Tripp Lite PowerVerter APSX4048SW benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten
Bedienungsanleitung Akku Tripp Lite
7 August 2024
1 August 2024
30 Juli 2024
28 Juli 2024
22 Juli 2024
16 Juli 2024
5 Juli 2024
Bedienungsanleitung Akku
- Akku Hama
- Akku Kensington
- Akku Nedis
- Akku Trust
- Akku Watson
- Akku Panasonic
- Akku LG
- Akku Bosch
- Akku Vonroc
- Akku Canon
- Akku Conrad
- Akku Cocraft
- Akku Ryobi
- Akku Skil
- Akku Carat
- Akku Hilti
- Akku DeWalt
- Akku Einhell
- Akku Worx
- Akku Fuxtec
- Akku Kress
- Akku Varta
- Akku Biltema
- Akku Epson
- Akku TOA
- Akku Ansmann
- Akku Petzl
- Akku Husqvarna
- Akku Scosche
- Akku Stihl
- Akku Genaray
- Akku Fujifilm
- Akku Nikon
- Akku DJI
- Akku Stiga
- Akku Leica
- Akku Greenworks
- Akku PNY
- Akku Xtorm
- Akku Techly
- Akku Vetus
- Akku Monacor
- Akku Milwaukee
- Akku Toolcraft
- Akku Victron Energy
- Akku Fein
- Akku EGO
- Akku Gardena
- Akku HQ
- Akku Cobra
- Akku Powerplus
- Akku Digitus
- Akku APC
- Akku McCulloch
- Akku Ozito
- Akku CyberPower
- Akku Deltaco
- Akku Speed-Link
- Akku Fluke
- Akku Hikvision
- Akku EnerGenie
- Akku Hähnel
- Akku Ultron
- Akku Cortina
- Akku Berg
- Akku Energizer
- Akku Neewer
- Akku Stinger
- Akku Sungrow
- Akku Growatt
- Akku Aluratek
- Akku Inovonics
- Akku SolarEdge
- Akku Arris
- Akku Duracell
- Akku Arctic Cooling
- Akku Wentronic
- Akku SOUNDBOKS
- Akku PowerBass
- Akku BlackVue
- Akku E-flite
- Akku For_Q
- Akku Bolt
- Akku Anton/Bauer
- Akku Anova
- Akku Lenmar
- Akku Verico
- Akku APSystems
- Akku Enphase
- Akku A-solar
- Akku Valcom
- Akku Impact
- Akku Team Orion
- Akku Red Power
- Akku Whistler
- Akku PowerDrive
- Akku Fxlion
- Akku TCW Technologies
- Akku Tecnoware
- Akku Ventev
Neueste Bedienungsanleitung für -Kategorien-
8 Oktober 2024
6 Oktober 2024
Arris SURFboard Touchstone Battery BPB022S Bedienungsanleitung
29 September 2024
24 September 2024
24 September 2024
24 September 2024
24 September 2024
24 September 2024
21 September 2024
21 September 2024