Tripp Lite PDUV15-48 Bedienungsanleitung

Tripp Lite Anbaustein PDUV15-48

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Tripp Lite PDUV15-48 (16 Seiten) in der Kategorie Anbaustein. Dieser Bedienungsanleitung war für 10 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF

Seite 1/16

Rack PDU

Important Safety Instructions 2

Important Warnings 2

Installation 3

Features 4

Warranty & Product Registration 5

Español 6

Français 11

Metered Models:

PDUMV15

(Series Number: AGIB6098)

PDUMV20

(Series Number: AGIB6099)

Basic Models:

PDUV15

(Series Number: AGIB6098)

PDUV20

(Series Number: AGIB6099)

PDUV20-60

(Series Number: AGIB6099)

PDUV15-48

(Series Number: AGIB6098)

Owner’s Manual

WARRANTY REGISTRATION

automatically entered to win an ISOBAR®

surge protector in our monthly drawing!

tripplite.com/warranty

1111 W. 35th Street, Chicago, IL 60609 USA • tripplite.com/support

20-09-044-93364D.indb 1

SAVE THESE INSTRUCTIONS

This manual contains instructions and warnings that should be

followed during the installation, operation and storage of this

product. Failure to heed these instructions and warnings will

void the product warranty.

• The PDU provides the convenience of multiple outlets, but DOES NOT provide surge or line

noise protection for connected equipment.

• The PDU is designed for indoor use only, in a controlled environment, away from excess

moisture, temperature extremes, conductive contaminants, dust or direct sunlight.

• Keep indoor ambient temperature between 32°F and 77°F (0°C and 25°C).

• The PDU must be installed by a qualified technician only.

• Do not attempt to mount the PDU to an insecure or unstable surface.

• Install in accordance with National Electrical Code standards. Be sure to use the proper

overcurrent protection for the installation, in accordance with the plug/equipment rating.

• Connect the PDU to an outlet that is in accordance with your local building codes and that

is adequately protected against excess currents, short circuits and earth faults.

• The electrical outlets supplying power to the equipment should be installed near the

equipment and easily accessible.

• Do not connect the PDU to an ungrounded outlet or to extension cords or adapters that

eliminate the connection to ground.

• Be sure to provide a local disconnect device on any models that are permanently installed

without a plug that is easily accessible.

• Never attempt to install electrical equipment during a thunderstorm.

• Individual equipment connected to the PDU should not draw more current than the

individual PDU’s outlet’s rating.

• The total load connected to the PDU must not exceed the maximum load rating for the

PDU.

• Do not attempt to modify the PDU, input plugs or power cables.

• Do not drill into or attempt to open any part of the PDU housing. There are no user-

serviceable parts inside.

• Do not attempt to use the PDU if any part of it becomes damaged.

• Use of this equipment in life support applications where failure of this equipment can

reasonably be expected to cause the failure of the life support equipment or to significantly

affect its safety or effectiveness is not recommended.

Important Safety Instructions

Important Warnings

20-09-044-93364D.indb 2

0U Rack Configuration. Attach the three mounting

clips supplied with the PDU to the rack enclosure using

the included hardware. The mounting clips should be

attached along a vertical plane at equidistant points

which roughly correspond to the center and ends of the

PDU. The exact mounting configuration may vary

depending on the rack and enclosure. If possible, use

pre-existing mounting points within the enclosure.

Wall or Under-Counter Configuration. Attach the

three mounting clips supplied with the PDU to a wall or

similar flat, secure surface using the included hardware.

The mounting clips should be attached along a vertical

or horizontal plane at equidistant points which roughly

correspond to the center and ends of the PDU. If

possible, use pre-existing mounting points. WARNING:

Do not attempt to mount the PDU with the outlets

facing downward; the mounting clips are not

designed to support the weight of the PDU in that

manner.

0U Rack Configuration. Attach the included mounting

buttons to the PDU. Position the PDU as desired in the

rack enclosure, align the buttons with the rack

mounting slots, and slide the PDU into position. Go to

step

Note: Regardless of configuration, the user must determine the

fitness of hardware and procedures before mounting. The PDU

and included hardware are designed for common rack and rack

enclosure types and may not be appropriate for all applications.

Attach the PDU to the mounting clips. Using an

assistant, place a rear corner of the PDU at an inside

edge of the mounting clips, pivot the PDU toward the

alternate inside edge and snap into place.

Attach the input plug of the PDU to a grounded

outlet. Insert the plug directly into a grounded outlet

that does not share a circuit with a heavy electrical

load (such as an air conditioner or refrigerator).

Attach equipment to the PDU. Do not exceed the

load rating of the PDU. The total electrical current used

by the PDU will be displayed on the digital meter in

amperes (models PDUMV15 and PDUMV20 only).

Optional Installation (Models PDUMV20 and

PDUV20). The PDU includes an adapter that converts

the L5-20P input plug to a 5-20P input plug. The

adapter is optional; the PDU will work properly without

connecting the adapter.

PDUMV15 and PDUV15

PDUMV20 and PDUV20

Installation

20-09-044-93364D.indb 3

Produktspezifikationen

Marke:	Tripp Lite
Kategorie:	Anbaustein
Modell:	PDUV15-48
Breite:	38.1 mm
Tiefe:	41.7 mm
Gewicht:	1700 g
Produktfarbe:	Schwarz
Höhe:	1231.1 mm
Stecker:	NEMA L5-15P
AC Eingangsfrequenz:	50 - 60 Hz
Verpackungsbreite:	87.1 mm
Verpackungstiefe:	61 mm
Verpackungshöhe:	1315 mm
Paketgewicht:	2010 g
Montage:	Senkrecht
Zertifizierung:	UL60950-1 (USA) and CAN/CSA C22.2 No. 60950-1-03 (Canada)
Ursprungsland:	China
Kabellänge:	4.57 m
Betriebsanleitung:	Ja
Gehäusematerial:	Metall
LED-Anzeigen:	Ja
Temperaturbereich bei Lagerung:	-15 - 50 °C
Anzahl Produkte pro Versandkarton:	6 Stück(e)
Gewicht Versandkarton:	12830 g
Länge des Versandkartons:	1335 mm
Breite des Versandkartons:	195.1 mm
Höhe des Versandkartons:	214.9 mm
Nachhaltigkeitszertifikate:	RoHS
Rackmontageset:	Ja
Höhe bei Betrieb:	0 - 3000 m
Hauptkarton GTIN (EAN/UPC):	10037332255812
Anzahl der AC-Ausgänge:	16 AC-Ausgänge
AC-Steckertypen:	NEMA 5–15R
Stromstärke (maximal):	15 A
Nominale Eingang Spannung:	100-127 V
Nominale Ausgang Spannung:	100-127 V
Rack-Kapazität:	0U
PDU-Typen:	Standard