Tripp Lite PDUMNV20 Bedienungsanleitung

Tripp Lite Anbaustein PDUMNV20

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Tripp Lite PDUMNV20 (36 Seiten) in der Kategorie Anbaustein. Dieser Bedienungsanleitung war für 46 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF

Seite 1/36

Owner’s Manual

Monitored Rack PDU

Switched Rack PDU

0U (Vertical) Format

Important Safety Instructions 2

Monitored Rack PDU Features 2

Switched Rack PDU Features 3

Installation 3

Features 8

Configuration and Operation 11

Service 11

Warranty and Product Registration 12

Español 13

Français 25

PROTECT YOUR INVESTMENT!

and ultimate peace of mind.

You could also win an

ISOBAR6ULTRA surge protector—

a $100 value!

www.tripplite.com/warranty

1111 W. 35th Street, Chicago, IL 60609 USA • www.tripplite.com/support

PDUMN15/NET

(120V 12A Model)

Series Number: AG-0008

PDUMNV20/NET

(120V 16A Model)

Series Number: AG-0009

PDUMNV30/NET

(120V 24A Model)

Series Number: AG-0010

16-10-209-933666.indb 1 12/22/2016 11:31:08 AM

SAVE THESE INSTRUCTIONS

This manual contains instructions and warnings that should be followed

during the installation, operation, and storage of this product. Failure to

heed these instructions and warnings will void the product warranty.

Important Safety Instructions

Monitored Rack PDU Features

• The PDU provides the convenience of multiple outlets, but DOES NOT provide surge or line

noise protection for connected equipment.

• The PDU is designed for indoor use only, in a controlled environment, away from excess

moisture, temperature extremes, conductive contaminants, dust or direct sunlight.

• Keep indoor ambient temperature between 32°F and 122°F (0°C and 50°C).

• The PDU must be installed by a qualified technician only.

• Do not attempt to mount the PDU to an insecure or unstable surface.

• Install in accordance with National Electrical Code standards. Be sure to use the proper

overcurrent protection for the installation, in accordance with the plug/equipment rating.

• Connect the PDU to an outlet that is in accordance with your local building codes and that is

adequately protected against excess currents, short circuits and earth faults.

• The electrical outlets supplying power to the equipment should be installed near the

equipment and easily accessible.

• Do not connect the PDU to an ungrounded outlet or to extension cords or adapters that

eliminate the connection to ground.

• Be sure to provide a local disconnect device on any models that are permanently installed

without a plug that is easily accessible.

• Never attempt to install electrical equipment during a thunderstorm.

• Individual equipment connected to the PDU should not draw more current than the individual

PDU’s outlet’s rating.

• The total load connected to the PDU must not exceed the maximum load rating for the PDU.

• Do not attempt to modify the PDU, input plugs or power cables.

• Do not drill into or attempt to open any part of the PDU housing. There are no user-

serviceable parts inside.

• Do not attempt to use the PDU if any part of it becomes damaged.

• Use of this equipment in life support applications where failure of this equipment can

reasonably be expected to cause the failure of the life support equipment or to significantly

affect its safety or effectiveness is not recommended.

• Network interface enables remote power monitoring and event notification.

• Digital amp meter for on-site load monitoring.

• Optional EnviroSense2 modules (E2MT, E2MTDO, E2MTDI, E2MTHDI) allow for a variety of

environmental monitoring and control options.

• Toolless button-mount installation in Tripp Lite SmartRack

® and many third-party enclosures.

16-10-209-933666.indb 2 12/22/2016 11:31:08 AM

Switched Rack PDU Features

• Network interface enables remote power monitoring and individual outlet control.

• Individually controllable outlets allow remote rebooting of locked-up network devices.

• Digital amp meter for on-site load monitoring.

• Optional EnviroSense2 modules (E2MT, E2MTDO, E2MTDI, E2MTHDI) allow for a variety of

environmental monitoring and control options.

• Toolless button-mount installation in Tripp Lite SmartRack and many third-party enclosures.

Mounting the PDU

Note: The illustrations may differ somewhat from your PDU model. Regardless of configuration, the user must

determine the fitness of hardware and procedures before mounting. The PDU and included hardware are

designed for common rack and rack enclosure types and may not be appropriate for all applications. Exact

mounting configurations may vary. Screws for attaching the mounting brackets and cord retention shelf to the

PDU are included. Use only the screws supplied by the manufacturer, or their exact equivalent (#6-32, ¼"

flat head).

If installing the PDU in a rack that has button-mount slots, you only need to perform step 1-1 .

If your rack enclosure does not have button-mount slots, proceed to step 1-2 .

Installation

1-1 To install the PDU in a rack equipped

with button-mount slots, insert the

mounting buttons on the rear of the

PDU into the button-mount slots on

the rack and slide the PDU down until

the mounting buttons engage the

narrow section of the button-mount

slots.

Note: To install the PDU with its outlets

facing the rear of the rack, use the

included PDUMVROTATEBRKT accessory.

This V-shaped bracket provides a mounting

button on one leg of the V and a button-

mount slot on the other, effectively

repositioning the mounting buttons. See

Features section for image.

1-2 Attach the mounting brackets to the

PDU.

1-3 (Optional) Attach the cord retention

bracket(s) to the PDU.

1-4 Attach the PDU to a vertical rail in

your rack or rack enclosure. Use the

included mounting hardware to attach

the mounting brackets to the rail.

1-2

1-1

1-3 1-4

16-10-209-933666.indb 3 12/22/2016 11:31:32 AM

Produktspezifikationen

Marke:	Tripp Lite
Kategorie:	Anbaustein
Modell:	PDUMNV20
Gewicht:	7000 g
Produktfarbe:	Schwarz
Stecker:	NEMA 5–20P
AC Eingangsfrequenz:	50 - 60 Hz
Relative Luftfeuchtigkeit in Betrieb:	5 - 95 %
Paketgewicht:	5533 g
Montage:	Senkrecht
Display:	LCD
Kabellänge:	3 m
Gehäusematerial:	Metall
LED-Anzeigen:	Ja
Temperaturbereich bei Lagerung:	-15 - 50 °C
Abmessungen (BxTxH):	55 x 44 x 1778 mm
Nachhaltigkeitszertifikate:	RoHS
Verpackungsabmessungen (BxTxH):	101 x 152 x 1841 mm
Max. Leistung:	2030 W
Anzahl der AC-Ausgänge:	24 AC-Ausgänge
AC-Steckertypen:	NEMA 5–15R, NEMA 5–20R
Stromstärke (maximal):	20 A
Nominale Eingang Spannung:	120 V
Nominale Ausgang Spannung:	120 V
Rack-Kapazität:	0U
PDU-Typen:	Überwacht