Tripp Lite PDU3VN6L1530B Bedienungsanleitung

Tripp Lite Anbaustein PDU3VN6L1530B

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Tripp Lite PDU3VN6L1530B (76 Seiten) in der Kategorie Anbaustein. Dieser Bedienungsanleitung war für 9 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF

Seite 1/76

Owner’s Manual

3-Phase Monitored 0U Power

Distribution Units

(Phase and Bank Measurements)

208V MODELS

PDU3VN6L2120 • PDU3VN6L2130 • PDU3VN6G30B

(Series Number: AG-00B8) (Series Number: AG-00B9) (Series Number: AG-00BA)

400V MODEL

PDU3XVN6G20

(Series Number: AG-00BD)

Important Safety Instructions 2

Installation 3

Digital Display 6

Using the Digital Display 9

Features 16

Conﬁguration and Operation 18

Service 18

Warranty and 19

Product Registration

Español 20

Français 39

Русский 58

1111 W. 35th Street, Chicago, IL 60609 USA • www.tripplite.com/support

PDU3VN6L1530B

(Series Number: AG-00BA)

PDU3VN6L2130B

(Series Number: AG-00BA)

PDU3VN6H50B

(Series Number: AG-00BA)

PDU3VN6G60B

(Series Number: AG-00BA)

PDU3VN6G60C

(Series Number: AG-00BB)

• •

•

14-07-037-9332F9.indb 1 8/15/2014 3:13:05 PM

Important Safety Instructions

SAVE THESE INSTRUCTIONS

This manual contains instructions and warnings that should be followed during

the installation, operation, and storage of this product. Failure to heed these

instructions and warnings may affect the product warranty.

• The PDU provides the convenience of multiple outlets, but DOES NOT provide surge or line

noise protection for connected equipment.

• The PDU is designed for indoor use only, in a controlled environment, away from excess

moisture, temperature extremes, conductive contaminants, dust or direct sunlight.

• Keep indoor ambient temperature between 32°F and 122°F (0°C and 50°C).

• The PDU must be installed by a qualiﬁed technician only.

• Do not attempt to mount the PDU to an insecure or unstable surface.

• Install in accordance with National Electrical Code standards. Be sure to use the proper

overcurrent protection for the installation, in accordance with the plug/equipment rating.

• Connect the PDU to an outlet that is in accordance with your local building codes and that is

adequately protected against excess currents, short circuits and earth faults.

• The electrical outlets supplying power to the equipment should be installed near the equipment

and easily accessible.

• Do not connect the PDU to an ungrounded outlet or to extension cords or adapters that

eliminate the connection to ground.

• Be sure to provide a local disconnect device on any models that are permanently installed

without a plug that is easily accessible.

• Never attempt to install electrical equipment during a thunderstorm.

• Individual equipment connected to the PDU should not draw more current than the individual

PDU’s outlet’s rating.

• The total load connected to the PDU must not exceed the maximum load rating for the PDU.

• Do not attempt to modify the PDU, input plugs or power cables.

• Do not drill into or attempt to open any part of the PDU housing. There are no user-serviceable

parts inside.

• Do not attempt to use the PDU if any part of it becomes damaged.

• Use of this equipment in life support applications where failure of this equipment can

reasonably be expected to cause the failure of the life support equipment or to signiﬁcantly

affect its safety or effectiveness is not recommended. Do not use this equipment in the

presence of a ﬂammable anesthetic mixture with air, oxygen or nitrous oxide.

14-07-037-9332F9.indb 2 8/15/2014 3:13:05 PM

1-5

1-1

1-6

1-5

1-2 1-3 1-4

Installation

Mounting the PDU

Note: The illustrations may differ somewhat from your PDU model. Regardless of conﬁguration, the user must

determine the ﬁtness of hardware and procedures before mounting. The PDU and included hardware are designed

for common rack and rack enclosure types and may not be appropriate for all applications. Exact mounting

conﬁgurations may vary. Screws for attaching the mounting brackets to the PDU are included. Use only the screws

supplied by the manufacturer or their exact equivalent.

Note: Mounting buttons come preinstalled to the PDU for toolless mounting.

1-1 To mount the PDU using the pre-installed

mounting buttons, position the PDU as

desired in the rack enclosure, align the

buttons with the rack mounting slots,

and slide the PDU into position.

1-2 To attach the mounting brackets to the

PDU, remove the mounting buttons.

1-3 Attach the mounting brackets to the

PDU with the included screws.

1-4 Attach the PDU to a vertical rail in

your rack or rack enclosure. (Use the

mounting hardware that came with your

rack or rack enclosure to attach the

mounting brackets to the rail.)

1-5 To reinstall the mounting buttons for

toolless mounting, remove the mounting

brackets then install the mounting

buttons onto the PDU.

Note: Be sure to insert the 2 buttons into either

the upper hole at of the PDU or into each end

the lower hole at of the PDU.each end

1-6 To install the PDU with its outlets facing

the rear of the rack, use the included

PDUMVROTATEBRKT accessory. First,

attach the mounting button A to the

V-shaped bracket B using the included

screw and washer. Then, use the

button-mount slot to attach the bracket

to the PDU and the mounting button to

attach the PDU to the rack. The bracket

effectively repositions the mounting

brackets allowing for the PDU outlets to

face the rear of the rack.

14-07-037-9332F9.indb 3 8/15/2014 3:13:07 PM

Produktspezifikationen

Marke:	Tripp Lite
Kategorie:	Anbaustein
Modell:	PDU3VN6L1530B
Gewicht:	6770 g
Produktfarbe:	Schwarz
Stecker:	NEMA L15-30P
AC Eingangsfrequenz:	50 - 60 Hz
Betriebstemperatur:	0 - 50 °C
Relative Luftfeuchtigkeit in Betrieb:	5 - 95 %
Paketgewicht:	9850 g
Montage:	Senkrecht
Unterstützte Netzwerkprotokolle:	HTTP, HTTPS, PowerAlert Network Management System, SMTP, SNMPv1, SNMPv2, SNMPv3, Telnet, SSH, FTP, DHCP, BOOTP, NTP
Zertifizierung:	Tested to UL/CAN60950-1 (USA, Canada)\nNOM (Mexico)\nClass A (Emissions)\nTAA Compliant
Display:	LCD
Typ:	Dreiphasig
Kabellänge:	1.83 m
Betriebsanleitung:	Ja
LED-Anzeigen:	Ja
Temperaturbereich bei Lagerung:	-15 - 60 °C
Ein-/Ausschalter:	Ja
Abmessungen (BxTxH):	55 x 73 x 1778 mm
Nachhaltigkeitszertifikate:	RoHS
Verpackungsabmessungen (BxTxH):	245 x 1927 x 175 mm
Max. Leistung:	10000 W
Höhe bei Betrieb:	0 - 3000 m
Anzahl der AC-Ausgänge:	48 AC-Ausgänge
AC-Steckertypen:	C13 coupler, C19 coupler
Stromstärke (maximal):	24 A
Nominale Eingang Spannung:	200-240 V
Nominale Ausgang Spannung:	200-240 V
Rack-Kapazität:	0U
PDU-Typen:	Überwacht
Überwachung:	Current, Humidity, Power, Temperature
Anzahl Master-AC-Ausgänge:	42
Anzahl Slave-AC-Ausgänge:	6