Trend T5ELB Bedienungsanleitung
Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Trend T5ELB (32 Seiten) in der Kategorie Fräse. Dieser Bedienungsanleitung war für 10 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet
Seite 1/32
T10 & T11
ORIGINAL
INSTRUCTIONS
Please read these instructions before use.
Failure to follow the warnings and instructions may
result in electric shock, fire and/or serious injury.
Definitions: Safety Guidelines
The definitions below describe the level of
severity for each signal word. Please read the
manual and pay attention to these symbols.
WARNING: indicates a potentially
hazardous situation which, if not avoided,
.could result in death or serious injury
CAUTION: Indicates a potentially
hazardous situation which, if not avoided,
may result in injury.minor or moderate
NOTICE: Indicates a practice to not related
personal injury which, if not avoided, may
result in property damage.
Denotes risk of electric shock.
Denotes risk of fire.
Additional Symbols Used
Wear Personal Protective Equipment
(PPE). Ear, eye and respiratory
protection must be worn.
Denotes risk of personal injury, loss of life
or damage to the tool in case or
non-observance of the instructions in this
manual.
For 115 Volt
The 115V router is not supplied with a plug.
We recommend a 32A BS4343 110V plug
is used. Minimum generator or transformer
requirement 3 kVA continuous with a 32A
BS4343 110V socket outlet.
The 115V router cannot be used with a 115V
No-Volt Release Switch.
T10 & T11
Dear Customer
Thank you for purchasing this Trend product,
we hope you enjoy many years of creative and
productive use.
Please remember to return your guarantee card
within 28 days of purchase.
CONTENTS
TECHNICAL DATA 1 ____________________
SAFETY ___________________________ 2-3
ELECTRICAL SAFETY ________________ 4
EC DECLARATION OF CONFORMITY ___ 5
ITEMS ENCLOSED ___________________ 5
DESCRIPTION OF PARTS _____________ 6-7
ASSEMBLY & ADJUSTMENT
– Switching On & Off ___________________ 8
– Depth of Cut ________________________ 8
– Fitting & Removing Cutters
____________ 9
– Speed Control _____________________ 10
– Fixing Points for Accessories
__________ 10
T10
– Dust Extraction Spout _______________ 11
– Fine Height Adjuster Accessory
________ 11
T10 & T11
– Template Guide Bush _______________ 12
T11
– Dust Extraction Spout _______________ 13
– Fine Height Adjuster _________________ 14
– Accessories _______________________ 15
OPERATION
– Cutting Direction & Feed Speed _______ 16
– Side-fence Routing __________________ 17
– Template Guide Bush Routing
_________ 18
– Beam Trammel Routing Accessory
_____ 19
– Bearing Guided Cutters ______________ 20
– Freehand Routing & Batten Routing
____ 21
MAINTENANCE _____________________ 22
ENVIRONMENTAL PROTECTION_______ 22
GUARANTEE _______________________ 22
SPARE PARTS
– Spare Parts List __________________ 23-26
– Spare Parts Diagram ________________ 27
If you require further safety advice,
technical information or spare parts,
please call Trend Technical Support
or visit www.trend-uk.com
T10 & T11
-1-
INTENDED USE
The router has been designed for professional
heavy duty routing of wood, wood based
materials and plastics.
This router is intended for routing grooves,
edges, profiles and slots as well as copy routing.
At reduced speed with the appropriate router
cutter fitted non-ferrous alloys can also be
routed.
These routers are professional power tools.
DO NOT use under wet conditions or in
presence of flammable liquids or gases.
DO NOT let children come into contact with
this appliance. Supervision is required when
inexperienced operators use this appliance.
This product is not intended for use by persons
(including children) suffering from diminished
physical, sensory or mental abilities; lack of
experience, knowledge or skills unless they are
supervised by a person responsible for their safety.
Children should never be left alone with this product.
WARNING: The declared vibration emission level
represents the main application of the tool. However
if the tool is used for different applications, with
different accessories or poorly maintained, the
vibration emission may differ. This may significantly
increase the exposure level over the total working
period.
An estimation of the level of exposure to vibration
should also take into account the times when the
tool is switched off or when it is running but not
actually doing the job. This may significantly reduce
the exposure level over the total working period.
Identify additional safety measures to protect the
operator from the side effects of vibration such as:
maintain the tool and the accessories, keep hands
warm, organisation of work patterns.
The vibration emission level given in this information
sheet has been measured in accordance with
EN 60745 and may be used to compare one tool
with another. It may be used for a preliminary
assessment of exposure.
Voltage UK & Eire VAC 230/115
Europe VAC 230
Power input W 2,000
Power output W 1,110
No-load speed min-1 8,000-20,000
Router 2 columns
carriage
Router carriage mm 80
stroke
Revolver mm 3-step, with
depth stop graduation
& fine
adjustment
Collet size UK & Eire inch 1/2
UK & Eire mm 12.7
Europe mm 12
Cutter diameter, T10 mm 50
max. T11 mm 70
Weight kg 5.2
Noise values and vibration values
(triax vector sum) according to EN60745-2-17:
LPA (emission sound dB(A) 92
pressure level)
LWA (sound power level) dB(A) 100
KWA (uncertainty for the dB(A) 3.4
given sound level)
Vibration emission
Value ah = m/s2 3.1
Uncertainty K = m/s2 1.5
ROUTER
T10E & T11E
TECHNICAL DATA
Produktspezifikationen
| Marke: | Trend |
| Kategorie: | Fräse |
| Modell: | T5ELB |
Brauchst du Hilfe?
Wenn Sie Hilfe mit Trend T5ELB benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten
Bedienungsanleitung Fräse Trend
29 Januar 2024
10 Dezember 2023
9 Juli 2023
Bedienungsanleitung Fräse
- Fräse Makita
- Fräse Vonroc
- Fräse Black And Decker
- Fräse FERM
- Fräse Einhell
- Fräse Elu
- Fräse Festool
- Fräse Mafell
- Fräse Triton
- Fräse Hitachi
- Fräse Stanley
- Fräse Güde
- Fräse AL-KO
- Fräse Powerplus
Neueste Bedienungsanleitung für -Kategorien-
18 Mai 2024
12 Mai 2024
19 April 2024
17 April 2024
31 März 2024
14 März 2024
9 März 2024
7 Februar 2024
6 Februar 2024
1 Februar 2024