Trend T4 Bedienungsanleitung
Lesen Sie kostenlos die đ deutsche Bedienungsanleitung fĂŒr Trend T4 (22 Seiten) in der Kategorie FrĂ€se. Dieser Bedienungsanleitung war fĂŒr 13 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet
Seite 1/22
T4
PLUNGE
ROUTER
USA
T4 - USA
-1-
Dear Customer
Thank you for purchasing this Trend product, we
hope you enjoy many years of creative and
productive use.
Please remember to return your guarantee card
within 28 days of purchase.
TECHNICAL DATA
Voltage: 110V
Ampage: 6.6A
Power input 1HP
No load speed 11,500-32,000 rpm
Router carriage 2 columns
Router carriage stroke 11
â2â
Revolver depth stop 3-step, turret stop
adjustment with
graduation
Collet size 6.35mm (
1
â
4
â)
6mm & 8mm
Bit diameter max. 13
â16â
Weight 7.7lbs
CONTENTS
TECHNICAL DATA _____________________1
SAFETY ____________________________2-3
ELECTRICAL SAFETY _________________4
NOISE / VIBRATION ___________________5
ITEMS ENCLOSED ____________________5
DESCRIPTION OF PARTS_______________6
ASSEMBLY & ADJUSTMENT
â Dust Extractor Spout __________________7
â Switching On & Off____________________8
â Depth of Cut_________________________8
â Fitting & Removing Bits ________________9
â Speed Control ______________________10
â Fine Height Adjuster _________________10
â Fixing Points________________________10
OPERATION
â Cutting Direction & Feed Speed ________11
â Moulding Natural Timbers _____________11
â Side-Fence Routing __________________12
â Template Guide Bush Routing __________13
â Carving & Grinding___________________14
â Bearing Guided Bits __________________15
â Freehand Routing ___________________16
â Batten Routing ______________________16
MAINTENANCE & CARE_______________17
ENVIRONMENTAL PROTECTION________17
GUARANTEE ________________________17
SPARE PARTS
â Spare Parts List __________________18-19
â Spare Parts Diagram _________________20
-1-
The operation of any router can result in foreign
objects being thrown into your eyes, which can
result in severe eye damage. Before beginning
power tool operation, always wear safety glasses
with side shields and a full face shield when
needed. We recommend Wide Vision Safety Mask
for use over eye glasses or standard safety glasses
with side shields. Always wear eye protection.
Carefully read through this entire instruction Manual
and the entire router Operatorâs Manual before using
your new T4 Router. Pay close attention to the Safety
section and the Safety Symbols. If you use your T4
Router properly and only for what it is intended, you
will enjoy years of safe, reliable service.
Caution
For Technical Support
Email: technical@trend-usa.com
The following symbols are used throughout this
manual:
Denotes risk of personal injury, loss of
life or damage to the tool in case of
non-observance of the instructions in
this manual.
Denotes risk of electric shock.
T4 - USA
-2-
SAFETY
WARNING:
Observe the safety regulations in the
instruction manual of the power tool to be
used. Please read the following
instructions carefully. Failure to do so
could lead to serious injury. When using
electric tools, basic safety precautions,
including the following should always be
followed to reduce the risk of fire, electric
shock and personal injury. Also observe
any applicable additional safety rules.
Read the following safety instructions
before attempting to operate this product.
PLEASE KEEP THESE
INSTRUCTIONS IN A SAFE PLACE.
Users must be competent with
woodworking equipment before using our
products.
IMPORTANT NOTE:
Residual Risk. Although the safety
instructions and operating manuals for
our tools contain extensive instructions on
safe working with power tools, every
power tool involves a certain residual risk
which cannot be completely excluded by
safety mechanisms. Power tools must
therefore always be operated with
caution!
General
1. Disconnect power tool and attachment
from power supply when not in use,
before servicing, when making
adjustments and when changing
accessories such as bits. Ensure
switch is in âoffâ position. Always
ensure bit has stopped rotating.
2. Always mount the power tool,
accessory or attachment in conformity
with the instructions. Only use
attachment and accessories specified
in the power tool manual. The tool or
attachment should not be modified or
used for any application other than
that for which it was designed. Do not
force tool.
3. Keep children and visitors away. Do
not let children or visitors touch the
tool, accessory or attachment. Keep
children and visitors away from work
area. Make the workshop child proof
with padlock and master switch.
4. Dress properly. Do not wear loose
clothing or jewellry, they can be
caught in moving parts. Rubber
gloves and non-skid footwear is
recommended when working
outdoors. Wear protective hair
covering to contain long hair.
5. Consider working environment. Do
not use the product in the rain or in a
damp environment. Keep work area
well lit. Do not use power tools near
gasoline or flammable liquids. Keep
workshop at a comfortable
temperature so your hands are not
cold. Connect machines that are used
in the open via a residual current
device (RCD) with an actuation
current of 30 mA maximum. Use only
extension cords that are approved for
outdoor use.
6. The accessory or attachment must be
kept level and stable at all times.
7. Keep work area clean. Cluttered
workshops and benches can cause
injuries. Ensure there is sufficient
room to work safely.
8. Secure idle tools. When not in use,
tools should be stored in a dry and
high or locked up place, out of reach
of children.
9. For best control and safety use both
hands on the power tool and
attachment. Keep both hands away
from cutting area. Always wait for the
spindle and bit to stop rotating before
making any adjustments.
10. Always keep guards in place and in
good working order.
11. Remove any nails, staples and other
metal parts from the workpiece.
12. Maintain tools and bits with care.
Keep bits sharp and clean for better
and safer performance. Do not use
damaged bits. Follow instructions for
lubricating and changing accessories.
Keep handles dry, clean and free from
oil and grease.
13. Maintain accessories. Do not use
damaged accessories. Only use
accessories recommended by the
manufacturer.
14. Check damaged parts. Before
operation inspect the attachment, the
power tool, the cord, extension cord
and the plug carefully for signs of
damage. Check for alignment of
moving parts, binding, breakage,
mounting and any other conditions
that may effect its operation. Have any
damage repaired by an Authorised
Service Agent before using the tool or
accessory. Protect tools from impact
and shock.
15. Do not use tool if switch does not turn
it on or off. Have defective switches
replaced by an Authorised Service
Agent
16. Don't over reach. Keep proper footing
and balance at all times. Do not use
awkward or uncomfortable hand
positions.
17. Donât abuse the cord. Never carry
power tool or accessory by cord or
pull it to disconnect from the socket.
Keep cord from heat, oil and sharp
edges. Always trail the power cord
away from the work area.
18. Connect dust extraction equipment.
If devices are provided for the
connection of dust extraction and
collection facilities, ensure these are
connected and properly used.
19. Check all fixing and fastening nuts,
bolts and screws on power tool,
attachment and cutting tools before
use to ensure they are tight and
secure. Periodically check when
machining over long periods.
20. Stay alert. Watch what you are doing.
Use common sense. Do not operate
tools when you are tired, under the
influence of drugs or alcohol.
21. Personal Protective Equipment (PPE)
for eye, ear and respiratory protection
must be worn. All PPE must meet
current legislation.
22. Do not leave tools running
unattended. Do not leave tool until it
comes to a complete stop.
23. Always clamp workpiece being
machined securely.
24. Only use cutting tools for
woodworking that meet current safety
standards, and any subsequent
amendments.
25. Vibration levels. Hand held power
tools produce different vibration
levels. You should always refer to the
specifications and relevant safety
guidelines.
Routing Safety
1. Read and understand instructions
supplied with power tool, attachment
and bit.
2. Keep hands, hair and clothing clear of
the bit.
3. Remove adjusting keys and
wrenches. Check to see that keys
and adjusting wrenches are removed
from the router tool, bit and
attachment before turning router on.
Make sure bit can rotate freely.
4. Noise. Take appropriate measures
for the protection of hearing if the
sound pressure of 85dB(A) is
exceeded. Routing sound pressure
may exceed 85dB(A), so ear
protection must be worn.
5. Eye protection. Always wear eye
protection in the form of safety
goggles, spectacles or visors to
protect the eyes.
6. Respiratory protection. Wear a face
or dust mask, or powered respirator.
Dust masks/filters should be changed
regularly.
7. Do not switch router on with the bit
touching the workpiece. At the end of
the cut, release the router plunge and
allow spindle to stop rotating. Never
use the spindle lock as a brake
Produktspezifikationen
| Marke: | Trend |
| Kategorie: | FrÀse |
| Modell: | T4 |
Brauchst du Hilfe?
Wenn Sie Hilfe mit Trend T4 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten
Bedienungsanleitung FrÀse Trend
29 Januar 2024
10 Dezember 2023
Bedienungsanleitung FrÀse
- FrÀse Makita
- FrÀse Vonroc
- FrÀse Black And Decker
- FrÀse FERM
- FrÀse Einhell
- FrÀse Festool
- FrÀse Mafell
- FrÀse Triton
- FrÀse Hitachi
- FrÀse Stanley
- FrĂ€se GĂŒde
- FrÀse AL-KO
- FrÀse Powerplus
Neueste Bedienungsanleitung fĂŒr -Kategorien-
18 Mai 2024
12 Mai 2024
19 April 2024
17 April 2024
31 MĂ€rz 2024
14 MĂ€rz 2024
9 MĂ€rz 2024
7 Februar 2024
6 Februar 2024
1 Februar 2024